| Manufacturer | Ford-New Holland |
| Price | 56,500(USD) |
| Model | 8730 |
| Equipment Type | Row-Crop Tractors |
| Factory | Antwerp, Belgium |
NEBRASKA TRACTOR TEST 1516 2
| Description | Diesel 16-speed 2WD April 25 - May 15, 1984 Link: Nebraska Tractor Test 1516 file PTO performance Drawbar performance Gear 5L used for power test Gear 2L used for pull test |
| Power at rated engine speed | 140.68hp / 104.9kW |
| Fuel use | 9.0gal/hour / 34.1l/hour |
| Power at rated PTO speed | 135.70hp / 101.2kW |
| Max power | 124.84hp / 93.1kW |
| Max pull | 15,614lbs / 7082kg |
FORD-NEW HOLLAND 8730 POWER
| PTO (claimed) | 140hp / 104.4kW |
| Drawbar (tested) | 124.84hp / 93.1kW |
| PTO (tested) | 140.68hp / 104.9kW |
ENGINE DETAIL
The Ford-New Holland 8730 tractor features a robust 6-cylinder turbocharged diesel engine with a displacement of 6.6L, delivering optimal power at a rated RPM of 2200; this allows for efficient heavy-duty operations. Its compression ratio of 15.6:1 enhances fuel efficiency and reduces emissions, although it may require careful maintenance of valve clearances (0.014-0.019 inches) to avoid potential performance issues. With a coolant capacity ranging from 22 to 23.6 quarts, it’s well-suited for extended use in demanding agricultural environments, but operators should be vigilant about coolant levels to prevent overheating.
| Description | Ford turbocharged diesel 6-cylinder liquid-cooled |
| Displacement | 401ci / 6.6L |
| Bore/Stroke | 4.40x4.40inches / 112x 112mm |
| Compression | 15.6:1 |
| Rated RPM | 2200 |
| Firing order | 1-5-3-6-2-4 |
| Coolant capacity | 22qts / 20.8L 23.6qts / 22.3L (with heater) |
| Intake valve clearance | 0.014-0.016inches / 0.356 mm (cold) |
| Exhaust valve clearance | 0.017-0.019inches / 0.432 mm (cold) |
ENGINE OIL
The Ford-New Holland 8730 tractor has an oil capacity of 19.6 quarts (18.5 liters), which indicates a well-designed lubrication system for optimal engine performance and longevity. Regular oil changes are essential to maintain efficiency and reduce wear, especially under heavy load conditions, thus impacting operational costs and downtime. Ensure to use the manufacturer's recommended oil type to maximize engine protection and performance.
| Oil capacity | 19.6qts / 18.5L |
FORD-NEW HOLLAND 8730 ENGINE
The Ford-New Holland 8730 is powered by a robust 6.6L inline 6-cylinder diesel engine, providing high torque output for demanding agricultural tasks. Its design offers a balance of efficiency and power, ideal for heavy-duty operations such as plowing and hauling. However, potential buyers should consider maintenance complexity due to the engine's size and advanced components, which can affect long-term servicing costs.
| Description | Ford 6.6L 6-cyl diesel |
TRANSMISSIONS OVERVIEW
The Ford-New Holland 8730 tractor features an 18-speed transmission system, providing optimal gear selection for varying terrain and load conditions. It offers enhanced torque management, critical for heavy-duty applications, but may experience challenges in operator learning curve due to the increased complexity. The flexibility of speed ranges enables improved fuel efficiency and productivity in diverse farming scenarios.
| Description | 18-speed 16-speed 8-speed |
TRANSMISSION 1
The Ford-New Holland 8730 tractor features the Funk Ultra Command transmission, providing 18 forward and 9 reverse gears for versatile operation. A key advantage is the on-the-move gear shifting capability, allowing seamless transitions without clutch engagement, which enhances productivity during fieldwork. However, operators may need to acclimate to the single lever control for optimal precision, especially when utilizing the inching pedal for fine maneuvers in tight spaces.
| Transmission | Funk Ultra Command |
| Gears | 18 forward and 9 reverse |
| Oil capacity | 100.4qts / 95.0L |
| Description | The Ford Ultra Command Powershift allows on-the-move shifting between gears, and shuttle shifting, without a clutch. A single lever controls the transmission; moving it to the left shifts down, to the right shifts up. Pushing forward increases forward throttle while pulling it back moves the tractor in reverse. An inching pedal is used for precise movements |
SPEEDS 1
| Description | 18.4/15-38 rear tires |
TRANSMISSION 2
The Ford-New Holland 8730 features a Dual Power transmission with 16 forward and 4 reverse gears, enhancing versatility during operations in various field conditions. Its 'Powerdrive' low range allows for increased torque management, crucial for demanding tasks such as plowing or heavy towing. However, operators must be cautious with the foot switch while in motion to prevent abrupt shifts that could affect traction and stability.
| Transmission | Dual Power - constant mesh |
| Gears | 16 forward and 4 reverse |
| Oil capacity | 80qts / 75.7L (2WD) 85.5qts / 80.9L (4WD) |
| Description | The Dual Power transmission provides a 'Powerdrive' low range to the basic constant mesh transmission. A foot switch next to the clutch is used to engage and disengage the mode, and may be switched while the tractor is in motion A |
SPEEDS 2
| Description | 18.4/15-38 rear tires |
TRANSMISSION 3
The Ford-New Holland 8730 tractor features a constant mesh transmission with 8 forward and 2 reverse gears, allowing for versatile speed selection, though gear changes require the tractor to be stopped, which can be a limitation in field operations. The oil capacity varies between 72.8 quarts (2WD) and 87.3 quarts (4WD), indicating a slightly heavier maintenance requirement for the 4WD version. Operators should note that the two-lever system offers enhanced control over gear selection but may require a learning curve for efficient operation.
| Transmission | Constant mesh |
| Gears | 8 forward and 2 reverse |
| Oil capacity | 72.8qts / 68.9L (2WD) 87.3qts / 82.6L (4WD) |
| Description | Tranmission is operated with two levers and the clutch pedal. Left lever selects high, low, or the optional creeper range. Right lever selects one of four forward gears, or reverse. Tractor must be stopped to make gear or range changes |
SPEEDS 3
| Description | 18.4/15-38 rear tires |
MECHANICAL
The Ford-New Holland 8730 tractor features a robust 4x2/4x4 drivetrain offering flexibility for varying terrain conditions, enhancing traction and stability. With hydrostatic power steering, operators benefit from improved maneuverability, while the hydraulic wet disc brakes ensure reliable stopping power under heavy loads. The optional climate-controlled cab provides comfort for extended operation, making it suitable for both agricultural and industrial applications.
| Chassis | 4x2 2WD / 4x4 MFWD 4WD |
| Steering | hydrostatic power |
| Brakes | hydraulic wet disc |
| Cab | optional cab with heat and A/C |
| Transmissions | 18-speed 16-speed 8-speed |
CAPACITY
| Fuel | 75gal / 283.9L 24.5gal / 92.7L (auxiliary tank) |
| Steering | 2qts / 1.9L |
HYDRAULICS
| Type | open center gear pump, dual pumps optional |
| Pressure | 2500psi / 172.4bar |
| Valves | 2 to 4 |
| Pump flow | 20gpm / 75.7lpm 28.6gpm / 108.3lpm (dual pumps) |
| SCV flow | 16.9gpm / 64.0lpm 19gpm / 71.9lpm (dual pumps) |
| Steering cap. | 2qts / 1.9L |
| Steering press. | 2025psi / 139.6bar |
TRACTOR HITCH
| Rear Type | 3/2 |
| Control | position and draft control |
POWER TAKE-OFF (PTO)
| Rear PTO | independent |
| Rear RPM | 540/1000 |
FORD-NEW HOLLAND 8730 TIRES
The Ford-New Holland 8730 tractor features a versatile tire configuration with 11.00-16 for the front on 2WD models and 14.9/13-28 for 4WD, providing improved traction and stability across varying terrain conditions. The rear 18.4/15-38 tires allow for enhanced load distribution, critical for heavy-duty agricultural applications. However, the 2WD option may pose challenges in muddy or slippery conditions, making the 4WD variant preferable for enhanced mobility and performance in diverse farming scenarios.
| Ag front | 11.00-16 (2WD)/14.9/13-28 (4WD) |
| Ag rear | 18.4/15-38 |
DIMENSIONS
| Wheelbase | 111inches / 281cm |
| Length | 191inches / 485cm |
| Width | 82inches / 208cm |
| Ground clearance | 16.4inches / 41cm |
FORD-NEW HOLLAND 8730 WEIGHT
| 12,185lbs / 5527kg (2WD) 12,785lbs / 5799kg (2WD cab) 13,390lbs / 6073kg (4WD) 13,990lbs / 6345kg (4WD cab) 14,710lbs / 6672kg (4WD cab Powershift) |
FORD-NEW HOLLAND 8730 HEIGHT
| ROPS | 115inches / 292cm |
| Cab | 113.8inches / 289cm |
| Exhaust | 124.6inches / 316cm |
DIMENSIONS & TIRES
The Ford-New Holland 8730 tractor features a wheelbase of 111 inches (281 cm), providing stability for heavy-duty tasks while maneuvering in tight spaces. With a weight range of 12,185 to 14,710 pounds, this model is well-suited for handling various attachments, but operators should be mindful of ground pressure and compaction in sensitive soils. The tire specifications (front: 11.00-16 and rear: 18.4/15-38) enhance traction and flotation, making it advantageous for agricultural applications in varying terrains.
| Wheelbase | 111inches / 281cm |
| Weight | 12185 to 14710 pounds |
| Front tire | 11.00-16 |
| Rear tire | 18.4/15-38 |
FORD 7413 LOADER
| Height (to pin) | 156inches / 396cm |
| Clearance, dumped bucket | 122inches / 309cm |
| Dump reach | 33inches / 83cm |
| Breakout force (lift) | 6500lbs / 2948kg |
| Lift to full height (at pin) | 3800lbs / 1723kg |
ELECTRICAL
| Charging system | alternator |
| Charging amps | 90 |
| Battery volts | 12 |