| Manufacturer |
John Deere |
| Price |
21,323(USD) |
| Model |
3035D |
| Equipment Type |
Compact Tractors |
| Factory |
None |
KEY SPECS
| Engine power (gross) |
25.5 kW/34.2 hp |
| Power take-off (PTO) power |
22.7 kW/30.4 hp |
| Steering hydraulics |
16.8 L/min/4.4 gpm |
| Implement hydraulics |
22.4 L/min/5.9 gpm |
| Hitch type |
Category 1 |
| Lift capacity, 24-in. behind link arms |
944 kg/2081.2 lb |
| Standard transmission; forward/reverse |
8F/8R synchromesh shuttle shift gear transmission |
| Cruise control |
No |
| Approximate shipping weight (open-station; cab) |
Open operator station (OOS): 1275 kg/2811 lb/Cab: Not applicable |
| Wheelbase |
1574 mm/62 in. |
ENGINE
The John Deere 3035D features a Yanmar® 3-cylinder engine with a gross power of 25.5 kW, optimal for small to mid-sized farming operations that require efficient power delivery with a Final Tier 4 emissions standard for compliance. Its high-pressure common rail direct injection system enhances fuel efficiency and reduces emissions, although the natural aspiration may limit power output under heavy load compared to turbocharged alternatives. With a liquid cooling system and a pressurized lubrication setup, it offers reliable operation; however, the relatively small 36.7 L fuel tank may necessitate more frequent refueling during extended use.
| Manufacturer |
Yanmar® |
| Engine model |
3TNV88C-KJPT |
| Engine power (gross) |
25.5 kW/34.2 hp |
| Power take-off (PTO) power |
22.7 kW/30.4 hp |
| Rated engine speed |
2800 rpm |
| Injection pump type |
High pressure common rail direct injection |
| Aspiration |
Natural |
| Emissions compliance |
Final Tier 4 |
| Cylinders/displacement |
3 / 1.64 L/3 / 100.2 cu in. |
| Number of cylinders |
Three |
| Cylinder liners |
Cast-in-block |
| Bore and stroke |
88 x 90 mm/3.46 x 3.54 in. |
| Compression ratio |
19.1:1 |
| Lubrication |
Pressurized |
| Cooling system |
Liquid |
| Air cleaner |
Dual element |
| Engine torque at rated speed |
87 Nm/64.2 lb-ft |
| Fuel tank capacity |
36.7 L/9.7 U.S. gal. |
ELECTRICAL
| Battery size |
600 CCA |
| Alternator (12-V) |
55 amp |
| Starter size |
1.4 kW/1.9 hp |
FUEL SYSTEM
| Type |
High pressure common rail direct injection |
TRANSMISSION
The John Deere 3035D features an 8F/8R synchromesh shuttle shift transmission, providing smooth gear changes for increased productivity in varied terrains. With a robust wet disk brake system and power steering, it ensures excellent maneuverability and control, particularly in tight spaces. However, the absence of a creeper gear may limit low-speed operations in applications requiring precision, while the differential lock facilitates traction on uneven surfaces, enhancing stability in challenging conditions.
| Standard transmission; forward/reverse |
8F/8R synchromesh shuttle shift gear transmission |
| Left-hand reverser |
Yes |
| Transmission gear ranges |
Four gears and two ranges |
| Final drive |
Spur gear |
| Brakes |
Wet disk |
| Steering |
Power steering |
| Axle capacity |
Front/880 kg/1940 lb/Rear/1600 kg/3527 lb/ |
| Creeper |
No |
| Cruise control |
No |
| Differential lock |
Yes |
HYDRAULICS
| Type |
Open center |
| Pump rated output |
Steering/16.8 L/min/4.4 gpm/Implement/22.4 L/min/5.9 gpm/39.2 L/min/10.3 gpm |
| Pump type |
Single gear |
| Maximum operating pressure |
172 bar/2495 psi |
| Draft control sensing |
Position control |
| Remote control valves available |
Up to two (optional) |
3-POINT HITCH
| Type |
Category 1 |
| Lift capacity, 24-in. behind link arms |
944 kg/2081.2 lb |
POWER TAKE-OFF (PTO)
| Standard |
At 2400 rpm: 540 rpm |
| Control |
Mechanical |
| Clutch |
Transmission |
| Brake (for mid and rear PTO) |
Wet disk |
FLUID CAPACITIES
| Crankcase with filter |
4.5 L/4.8 qt |
| Transmission and hydraulic system |
33 L/34.8 qt |
FINAL DRIVE
OPERATOR STATION
| Rollover protective structure |
Type/Foldable/ASABE S478 |
| Platform - flat/straddle |
Straddle |
| Gear shift location - console/floor |
Right-hand side |
DIMENSIONS
| Wheelbase |
1574 mm/62 in. |
| Front axle clearance |
Minimum: 331 mm/13 in./Maximum: 353 mm/13.9 in. |
| Turning radius with brakes |
1.63 m/5.3 ft |
| Approximate shipping weight (open-station; cab) |
OOS: 1275 kg/2811 lb/Cab: Not applicable |
TIRES
The John Deere 3035D tractor features versatile tire options suitable for various applications: R1 Bar tires excel in agricultural tasks, providing optimal traction in muddy conditions, while R3 Turf tires minimize soil compaction for landscaping tasks, and R4 Industrial tires offer durability for construction. The R1 tires with dimensions 7-14 (front) and 11.2-24 (rear) are ideal for rugged terrain, whereas R3 and R4 options cater to specialized needs, balancing performance and tire wear. Selecting the right tire type is crucial, as it significantly influences operational efficiency and the tractor’s performance across different working environments.
| Front |
R1 Bar: 7-14/R3 Turf: 27x8.5-15/R4 Industrial: 25x8.5-14 |
| Rear |
R1 Bar: 11.2-24/R3 Turf: 41x14-20/R4 Industrial: 15-19.5 |
MISCELLANEOUS
| Toolbox |
Yes |
| Tilt steering wheel |
No |
| 12-V Outlet |
No |
