| Manufacturer |
John Deere |
| Price |
18,879(USD) |
| Model |
3025E |
| Equipment Type |
Compact Utility Tractors |
| Factory |
Augusta, Georgia, USA |
KEY SPECS
| Engine power (gross) |
18.2 kW/24.7 hp |
| Power take-off (PTO) power |
14.4 kW/19.4 hp |
| Steering hydraulics |
15 L/min/4 gpm |
| Implement hydraulics |
20.2 L/min/5.3 gpm |
| Hitch type |
Category 1 |
| Lift capacity, 24-in. behind link arms |
615.1 kg/1356 lb |
| Standard transmission; forward/reverse |
Hydrostatic transmission (HST) |
| Cruise control |
Optional |
| Approximate shipping weight (open-station; cab) |
1007.9 kg/2222 lb |
| Wheelbase |
159.5 cm/62.8 in. |
ENGINE
The John Deere 3025E tractor is equipped with a Yanmar 3TNV88F-EPJT2 diesel engine, offering a gross power output of 24.7 hp at 2400 rpm with a PTO rating of 19.4 hp, making it suitable for various agricultural tasks. Its Final Tier 4 emissions compliance ensures lower environmental impact while the direct injection and natural aspiration enhance fuel efficiency and response. Key considerations include its modest fuel tank capacity of 28.5 L, which may necessitate more frequent refueling during extensive operations, especially when operating near the upper limits of power.
| Family |
EYDXL1.64NDA/FYDXL1.64NDA/GYDXL1.64NDA |
| Manufacturer |
Yanmar |
| Engine model |
3TNV88F-EPJT2 |
| Engine power (gross) |
18.2 kW/24.7 hp |
| Power take-off (PTO) power |
14.4 kW/19.4 hp |
| Rated engine speed |
2400 rpm |
| Type |
Diesel |
| Injection pump type |
Direct injection |
| Aspiration |
Natural |
| Emissions compliance |
Final Tier 4 |
| Cylinders/displacement |
3 / 1.64 L/3 / 100.2 cu in. |
| Number of cylinders |
Three |
| Cylinder liners |
Cast-in-block |
| Bore and stroke |
88 x 90 mm/3.46 x 3.54 in. |
| Compression ratio |
19.1:1 |
| Lubrication |
Pressurized |
| Cooling system |
Water pump |
| Air cleaner |
Dual element |
| Engine torque at rated speed |
72.4 Nm/53.4 lb-ft |
| Fuel tank capacity |
28.5 L/7.5 U.S. gal. |
ELECTRICAL
| Battery size |
500 CCA |
| Alternator (12-V) |
55 amp |
| Starter size |
1.4 kW/1.9 hp |
FUEL SYSTEM
TRANSMISSION
The John Deere 3025E features a hydrostatic transmission (HST), offering seamless speed control without the need for shifting gears, enhancing operator ease during various tasks. The wet disc brakes provide superior stopping power and durability under heavy loads, which is beneficial for both agricultural and landscaping applications. However, the lack of a creeper gear may limit its low-speed performance in specialized tasks, necessitating careful consideration for those requiring precision driving in tight spaces.
| Standard transmission; forward/reverse |
Hydrostatic transmission (HST) |
| Left-hand reverser |
No |
| Final drive |
Bull Gear |
| Brakes |
Wet disc |
| Steering |
Power steering |
| Axle capacity |
Front/798 kg/1760 lb/Rear/1197 kg/2640 lb/ |
| Creeper |
No |
| Cruise control |
Optional |
| Differential lock |
Yes |
HYDRAULICS
| Type |
Open center |
| Pump rated output |
Steering/15 L/min/4 gpm/Implement/20.2 L/min/5.3 gpm/35.2 L/min/9.3 gpm |
| Pump type |
Dual gear |
| Maximum operating pressure |
172.4 bar/2500 psi |
| Draft control sensing |
Position control |
| Remote control valves available |
Up to two (optional) |
3-POINT HITCH
| Type |
Category 1 |
| Lift capacity, 24-in. behind link arms |
615.1 kg/1356 lb |
POWER TAKE-OFF (PTO)
| Standard |
Rear - 540 rpm |
| Control |
Independent |
| Clutch |
Wet disk |
| Brake (for mid and rear PTO) |
Wet disk |
FLUID CAPACITIES
| Crankcase with filter |
4.5 L/4.8 qt |
| Transmission and hydraulic system |
22 L/23.2 qt |
FINAL DRIVE
OPERATOR STATION
| Rollover protective structure |
Type/Foldable/ASABE S478 |
| Platform - flat/straddle |
Semi-flat |
| Gear shift location - console/floor |
Left-hand side |
DIMENSIONS
| Wheelbase |
159.5 cm/62.8 in. |
| Front axle clearance |
36.3 cm/14.3 in. |
| Turning radius without brakes |
2.9 m/9.4 ft |
| Approximate shipping weight (open-station; cab) |
1007.9 kg/2222 lb |
TIRES
The John Deere 3025E tractor features versatile tire options for various applications, including farm, turf, and R4 conditions, enhancing its adaptability for diverse terrains. Notably, the 27x8.5-15 front and 41x14-20 rear turf tires provide superior traction and minimal soil disturbance, making it ideal for landscape maintenance and light agricultural work. However, the selection of tire sizes also requires careful consideration of load capacity and maneuverability, particularly in confined spaces or on sloped terrains.
| Front |
Farm - 7-14/Turf - 27x8.5-15/R4 - 25x8.5-14/R4 - 27x8.5-15 |
| Rear |
Farm - 11.2-24/Turf - 41x14-20/R4 - 15-19.5/R4 - 43x16-20 |
