| Manufacturer |
John Deere |
| Price |
23,910(USD) |
| Model |
2032R |
| Equipment Type |
Compact Tractors |
| Factory |
None |
KEY SPECS
| Engine power (gross) |
At SAE J1995 rated power: 22.9 kW/31.2 hp |
| Power take-off (PTO) power |
18 kW/24.2 hp |
| Steering hydraulics |
15 L/min/4 gpm |
| Implement hydraulics |
20.2 L/min/5.3 gpm |
| Hitch type |
Category 1 |
| Lift capacity, 24-in. behind link arms |
615 kg/1356 lb |
| Standard transmission; forward/reverse |
Hydrostatic transmission (HST) |
| Cruise control |
Standard |
| Approximate shipping weight (open-station; cab) |
Open station: 1306 kg/2879 lb/Cab: Not applicable |
| Wheelbase |
1723 mm/67.8 in. |
ENGINE
The John Deere 2032R tractor features a Yanmar 3TNV88C-NJT2 engine with a gross power output of 22.9 kW, making it suitable for light to medium agricultural tasks. Its compact three-cylinder design with a 19.1:1 compression ratio ensures efficient fuel consumption and compliance with Final Tier 4 emissions regulations, although users may face challenges in power availability for heavy-duty applications. With a PTO power of 18 kW, it can effectively operate a wide range of implements, making it versatile for diverse farming scenarios.
| Manufacturer |
Yanmar® |
| Engine model |
3TNV88C-NJT2 |
| Engine power (gross) |
At SAE J1995 rated power: 22.9 kW/31.2 hp |
| Power take-off (PTO) power |
18 kW/24.2 hp |
| Rated engine speed |
2500 rpm |
| Type |
Direct Injection |
| Injection pump type |
Direct Injection |
| Aspiration |
Natural |
| Emissions compliance |
Final Tier 4 |
| Cylinders/displacement |
Three cylinders: 1.642 L/100.2 cu in. |
| Number of cylinders |
Three |
| Cylinder liners |
Cast-in-block |
| Bore and stroke |
88x90 mm/3.46x3.54 in. |
| Compression ratio |
19.1:1 |
| Lubrication |
Pressurized |
| Cooling system |
Water pump |
| Air cleaner |
Dual element |
| Engine torque at rated speed |
87.5 Nm/64.5 lb-ft |
| Fuel tank capacity |
32 L/8.5 U.S. gal. |
ELECTRICAL
| Battery size |
500 CCA |
| Alternator (12-V) |
85 amp |
| Starter size |
1.4 kW/1.9 hp |
FUEL SYSTEM
TRANSMISSION
The John Deere 2032R features a hydrostatic transmission, providing seamless forward and reverse control, ideal for precise maneuvering in tight agricultural spaces. Its 880 kg front and 1800 kg rear axle capacities offer robust handling for various implements, while the wet disc brakes enhance stopping power and durability under heavy loads. However, the absence of a creeper gear may limit its performance in ultra-low-speed applications like tilling, making it less suited for precision ground engagement tasks.
| Standard transmission; forward/reverse |
Hydrostatic transmission (HST) |
| Final drive |
Spur gear |
| Brakes |
Wet disc |
| Steering |
Power steering |
| Axle capacity |
Front/880 kg/1940 lb/Rear/1800 kg/3968 lb/ |
| Creeper |
No |
| Cruise control |
Standard |
| Differential lock |
Yes |
HYDRAULICS
| Type |
Open center |
| Pump rated output |
Steering/15 L/min/4 gpm/Implement/20.2 L/min/5.3 gpm/35.2 L/min/9.3 gpm |
| Pump type |
Dual gear |
| Maximum operating pressure |
172 bar/2495 psi |
| Draft control sensing |
Position control |
| Remote control valves available |
Up to three |
3-POINT HITCH
| Type |
Category 1 |
| Lift capacity, 24-in. behind link arms |
615 kg/1356 lb |
POWER TAKE-OFF (PTO)
| Standard |
Rear: 543 rpm/Mid: 1998 rpm |
| Control |
Independent |
| Clutch |
Wet disc |
| Brake (for mid and rear PTO) |
Wet disc |
FLUID CAPACITIES
| Crankcase with filter |
4.5 L/4.8 qt |
FINAL DRIVE
| Type |
Spur Gear |
| Differential lock |
Yes |
OPERATOR STATION
| Rollover protective structure |
Type/Foldable/ASABE S478 |
| Platform - flat/straddle |
Semi-flat |
DIMENSIONS
| Wheelbase |
1723 mm/67.8 in. |
| Turning radius with brakes |
2.46 m/8.07 ft |
| Approximate shipping weight (open-station; cab) |
Open station: 1306 kg/2879 lb/Cab: Not applicable |
TIRES
The John Deere 2032R features versatile tire options that allow for optimal performance across various applications, including agricultural (R1), turf (R3), and industrial (R4) scenarios. The R1 Ag tires provide superior traction for field operations, while R3 Turf tires minimize ground disturbance on lawns, making them suitable for landscaping. Choosing the right tire type based on the operational environment is crucial for maximizing efficiency and longevity.
| Front |
R1 Ag 7.00-12/R3 Turf 23x8.50-14/R4 Industrial 23x8.50-14/R3 Turf Radial 200/60 R15 |
| Rear |
R1 Ag 12.4-16/R3 Turf 14-17.5/R4 Industrial 14-17.5/R3 Turf Radial 300/70 R20 |
MISCELLANEOUS
| Toolbox |
Yes |
| Tilt steering wheel |
Yes |
| 12-V Outlet |
Yes |
