| Manufacturer |
New Holland |
| Price |
14,000(USD) |
| Model |
1530 |
| Equipment Type |
- |
| Factory |
|
NEW HOLLAND 1530 POWER
| Engine (gross) |
25 hp/18.6 kW |
| Engine (net) |
23.7 hp/17.7 kW |
| Gear PTO (claimed) |
21.7 hp/16.2 kW |
| Hydro PTO (claimed) |
20.3 hp/15.1 kW |
ENGINE DETAIL
The New Holland 1530 is powered by a Shibaura 3-cylinder diesel engine with an 81.2 ci (1.3 L) displacement, producing 25 hp (18.6 kW) at 2600 RPM, which offers a good balance of power for light agricultural tasks. Its indirect fuel injection system enhances fuel efficiency and engine longevity, while the glow plug pre-heating aids in cold starts, making it suitable for varied climatic conditions. However, its relatively low horsepower may limit performance in more demanding applications, making it best suited for small farms or as a utility tractor in confined spaces.
| Description |
Shibaura/diesel/3-cylinder/liquid-cooled |
| Displacement |
81.2 ci/1.3 L |
| Power (gross) |
25 hp/18.6 kW |
| Fuel system |
indirect injection |
| Pre-heating |
glow plugs |
| Rated RPM |
2600 |
| Starter volts |
12 |
NEW HOLLAND 1530 ENGINE
The New Holland 1530 is powered by a Shibaura 1.3L 3-cylinder diesel engine, offering reliable performance for small to medium farming tasks. With a fuel tank capacity of 7.3 gallons (27.6 liters), it strikes a balance between efficiency and operational range, suitable for short to moderate-duration projects. However, the compact engine may limit power output for larger implements, making it best suited for light to moderate load applications.
| Description |
Shibaura 1.3L 3-cyl diesel |
| Fuel tank |
7.3 gal/27.6 L |
TRANSMISSIONS OVERVIEW
The New Holland 1530 tractor features a 9-speed sliding gear/hydrostatic transmission, providing precise control over speed and torque for various applications, such as plowing or hauling. The hydrostatic component enhances ease of operation, facilitating seamless transitions between speeds without the need for clutch engagement. A potential challenge could be maintenance complexity; users should ensure regular checks on hydraulic fluid levels to prevent performance degradation.
| Description |
9-speed sliding gear/hydrostatic |
TRANSMISSION 1
The New Holland 1530 tractor features a sliding gear transmission with 9 forward and 3 reverse gears, allowing for versatile speed control and adaptability to various tasks. The dry disc clutch provides reliable engagement and durability, though it may require more maintenance compared to hydraulic clutches. Ideal for agricultural applications, its gear setup ensures efficient power delivery for both towing and field operations, although operators may need to familiarize themselves with gear shifting for optimal performance.
| Type |
sliding gear |
| Gears |
9 forward and 3 reverse |
| Clutch |
dry disc |
TRANSMISSION 2
The New Holland 1530 features a hydrostatic transmission, offering seamless speed control without the need for clutch engagement, which enhances operational efficiency, especially in applications requiring precise maneuverability. The infinite (3-range) forward and reverse gears allow for tailored speed adjustments across varying field conditions, beneficial for tasks like tilling or loading. However, hydrostatic systems may have higher initial costs and maintenance requirements compared to traditional gear systems, necessitating careful cost-benefit analysis for decision-making.
| Type |
hydrostatic |
| Gears |
infinite (3-range) forward and reverse |
MECHANICAL
The New Holland 1530 tractor offers versatile configurations with both 2WD and 4WD options, providing suitable traction for varied terrains; however, the 4x2 setup may limit performance in softer soils compared to its 4x4 counterpart. The wet disc braking system enhances stopping power and safety, especially in heavy-duty tasks, but users should consider maintenance requirements associated with this braking type. The optional hydrostatic transmission allows for smoother and precise speed control, which is advantageous in applications requiring nuanced handling, such as in orchards or gardening, while the standard 9-speed sliding gear may be more beneficial for straightforward fieldwork.
| Chassis |
4x2 2WD/4x4 MFWD 4WD |
| Final drives |
spur gear |
| Steering |
hydrostatic power/SuperSteer optional |
| Brakes |
wet disc |
| Cab |
Two-post fixed ROPS. Foldable ROPS optional. |
| Transmissions |
9-speed sliding gear/hydrostatic |
HYDRAULICS
| Type |
open center |
| Pressure |
2133 psi/147.1 bar |
| Pump flow |
7.1 gpm/26.9 lpm |
| Total flow |
12.2 gpm/46.2 lpm |
| Steering flow |
5.1 gpm/19.3 lpm |
TRACTOR HITCH
| Rear Type |
I |
| Control |
position control |
| Rear lift (at ends) |
1921 lbs/871 kg |
| Rear lift (at 24"/610mm) |
1635 lbs/741 kg |
POWER TAKE-OFF (PTO)
| Rear PTO |
continuous live |
| Rear RPM |
540 |
| Mid PTO |
live (hydro) |
| Mid RPM |
2000 |
NEW HOLLAND 1530 TIRES
The New Holland 1530 tractor offers versatile tire options tailored for various applications, enhancing traction and stability across different terrains. With standard agricultural tires (5.50x16 front and 11.2x24 rear for 2WD) providing robust performance in fields, the optional turf and industrial tires allow for effective operations in lawn care and construction settings. It's crucial to match tire type with task requirements, as turf tires minimize ground disturbance while industrial tires improve load capacity, offering a tailored approach to operational efficiency.
| Standard tires (ag) |
Front: 5.50x16. Rear: 11.2x24 (2WD)/Front: 7x14. Rear: 11.2x24 (4WD) |
| Lawn/turf front |
23x8.50-12 (2WD)/25x8.50-14 (4WD) |
| Lawn/turf rear |
13.6x16 |
| Industrial front |
25x8.50-14 |
| Industrial rear |
15-19.5 |
DIMENSIONS
| Wheelbase |
63 inches/160 cm |
| SuperSteer Wheelbase |
72 inches/182 cm |
| 2WD Length |
106.6 inches/270 cm |
| 4WD Length |
106.2 inches/269 cm |
| SuperSteer Length |
115.3 inches/292 cm |
| Width |
54.3 inches/137 cm |
| Height (ROPS) |
87.8 inches/223 cm |
| 4WD Ground clearance |
15.1 inches/38 cm |
| 4WD Front tread |
43.4 inches/110 cm |
| Rear tread |
42.8 inches/108 cm |
NEW HOLLAND 1530 WEIGHT
| 2WD Shipping |
2318 lbs/1051 kg |
| 4WD Shipping |
2474 lbs/1122 kg |
| SuperSteer Shipping |
2588 lbs/1173 kg |
DIMENSIONS & TIRES
The New Holland 1530 tractor offers a compact wheelbase of 63 inches (160 cm), ideal for maneuverability in tight spaces and agility in diverse terrains. The SuperSteer option increases wheelbase to 72 inches (182 cm), enhancing stability at higher speeds but may reduce tight turning capability. Weighing between 2318 to 2588 pounds, this model provides substantial traction for 2WD systems, particularly with front tires sized at 5.50x16 and rear tires at 11.2x24, making it suitable for light to medium-duty agricultural tasks.
| Wheelbase |
63 inches/160 cm |
| SuperSteer Wheelbase |
72 inches/182 cm |
| Weight |
2318 to 2588 pounds |
| Front tire |
5.50x16 |
| Rear tire |
11.2x24 (2WD) |
ATTACHMENT OVERVIEW
60
| Type |
mid-mount New Holland 914A 60 |
| Cutting width |
60 inches/152 cm |
| Type |
front-mount New Holland 716B |
| Clearing width |
60 inches/152 cm |
72
| Type |
mid-mount New Holland 914A 72 |
| Cutting width |
72 inches/182 cm |
BLADE
| Type |
front-mount New Holland 702C |
| Width |
78 inches/198 cm |
NEW HOLLAND 757C BACKHOE
| Backhoe type |
New Holland 757C Backhoe |
ELECTRICAL
| Ground |
negative |
| Battery volts |
12 |
