| Manufacturer |
John Deere |
| Price |
2,955(USD) |
| Model |
630 |
| Equipment Type |
Row-Crop Tractors |
| Factory |
Waterloo, Iowa, USA |
ENGINES OVERVIEW
The John Deere 630 features a robust 5.0L 2-cylinder engine available in gasoline, all-fuel, and LP gas configurations, offering versatility for various fuel availability and operational scenarios. The gasoline variant provides efficient performance for typically lighter loads, while the all-fuel and LP gas versions enhance fuel flexibility and may reduce emissions. However, the reliance on specific fuel types may pose challenges in remote agricultural environments where fuel availability is limited.
| Description |
John Deere 5.0L 2-cyl gasoline John Deere 5.0L 2-cyl all-fuel John Deere 5.0L 2-cyl LP gas |
ENGINE DETAIL 1
The John Deere 630 features a reliable gasoline 2-cylinder, liquid-cooled engine with a displacement of 302.9 ci (5.0L) and a bore/stroke ratio of 5.50x6.375 inches, providing an optimal balance between torque and horsepower for agricultural tasks. Operating at a rated RPM of 1125, this tractor is suitable for pulling heavy loads in low-speed applications, although it may not be ideal for higher-speed operations due to lower RPM capabilities. Key maintenance factors include its oil capacity of 8 quarts and coolant capacity of 26 quarts, which support consistent performance and heat management in diverse operating conditions.
| Description |
John Deere gasoline 2-cylinder liquid-cooled |
| Displacemen |
302.9ci / 5.0L |
| Bore/Strok |
5.50x6.375inches / 140x 162mm |
| Rated RP |
1125 |
| Firing orde |
1-2 |
| Starter volt |
12 |
| Oil capacit |
8qts / 7.6L |
| Coolant capacit |
26qts / 24.6L |
ENGINE DETAIL 2
The John Deere 630 features a robust 2-cylinder, all-fuel engine with a displacement of 302.9 cubic inches (5.0L), providing sufficient torque for various agricultural tasks. Its bore and stroke dimensions (5.50x6.375 inches) contribute to high efficiency and effective power delivery at a rated RPM of 1,125. However, maintenance may be more intensive due to the relatively small oil capacity of 8 quarts (7.6L), so operators should ensure regular oil checks to maintain optimal engine performance.
| Description |
John Deere all-fuel 2-cylinder liquid-cooled |
| Displacemen |
302.9ci / 5.0L |
| Bore/Strok |
5.50x6.375inches / 140x 162mm |
| Rated RP |
1125 |
| Firing orde |
1-2 |
| Starter volt |
12 |
| Oil capacit |
8qts / 7.6L |
ENGINE DETAIL 3
The John Deere 630 features a liquid-cooled, 2-cylinder LP gas engine with a notable displacement of 302.9 ci (5.0L) and a robust rated RPM of 1125, which provides efficient power for various agricultural tasks. Its bore and stroke dimensions (5.50x6.375 inches) allow for a good torque curve, ideal for heavy towing and fieldwork scenarios. However, the reliance on LP gas may limit fuel availability in some regions, necessitating planning for fueling logistics.
| Description |
John Deere LP gas 2-cylinder liquid-cooled |
| Displacemen |
302.9ci / 5.0L |
| Bore/Strok |
5.50x6.375inches / 140x 162mm |
| Rated RP |
1125 |
| Firing orde |
1-2 |
| Starter volt |
12 |
| Oil capacit |
8 qts/7.6 L |
JOHN DEERE 630 ENGINES
The John Deere 630 tractor features a versatile 5.0L two-cylinder engine capable of operating on gasoline, all-fuel, or LP gas, providing flexibility in fuel choice. The varying fuel tank capacities—20.5 gallons for all-fuel, 22.25 gallons for gasoline, and 33 gallons for LP gas—enhance operational range based on user preference and availability. However, potential challenges include the need for proper fuel management and maintenance adaptations depending on the fuel type used.
| Description |
John Deere 5.0L 2-cyl gasoline John Deere 5.0L 2-cyl all-fuel John Deere 5.0L 2-cyl LP gas |
| Fuel tan |
20.5gal (all-fuel) / 77.6L 22.25gal (gasoline) / 84.2L 33gal (LP gas) / 124.9L |
| Aux. fue |
1gal / 3.8L |
TRANSMISSION
The John Deere 630 features an unsynchronized transmission offering 6 forward and 1 reverse gear, which can pose challenges during gear shifting, particularly when matching speeds. This system is advantageous for simpler mechanical design and lower maintenance but may require operator skill to maximize efficiency. Ideal for tasks that do not demand frequent directional changes or rapid gear shifts, such as plowing or haying operations.
| Typ |
unsynchronized gear |
| Gear |
6 forward and 1 reverse |
SPEEDS
| Description |
With 13.6-38 rear tires |
JOHN DEERE 630 TRANSMISSION
The John Deere 630's 6-speed unsynchronized gear transmission offers farmers a straightforward gear selection process, albeit with the drawback of requiring more precise shifting techniques, particularly at higher speeds. This type of transmission can enhance fuel efficiency and provide adequate torque for various field tasks. However, operators may face challenges in smooth gear transitions, especially in demanding conditions, necessitating experience for optimal performance.
| Description |
6-speed unsynchronized gear |
MECHANICAL
The John Deere 630 features a two-wheel drive configuration, which may limit traction on slippery or uneven terrain but offers improved maneuverability in flat fields. The mechanical drum brakes provide consistent stopping power but may require more maintenance than hydraulic systems. An optional power steering can enhance operator control and reduce fatigue during extended use, making it advantageous for longer tasks.
| Description |
Two-wheel drive Differential mechanical drum brakes Open operator station |
| Steerin |
power OptOptional |
HYDRAULICS
| Pressur |
1200psi / 82.7bar |
| Valve |
1 or 2 |
| Pump flo |
8.9gpm / 33.7lpm |
TRACTOR HITCH
POWER TAKE-OFF (PTO)
| Rear PT |
independent |
| Rear RP |
540 |
JOHN DEERE 630 TIRES
The John Deere 630 tractor features a narrow front axle with Ag front tires (6.00-16) offering improved maneuverability in tight spaces. The rear tire options (13.6-38, 15.5-38, 11-38, 12-38) provide versatility for various agricultural applications, allowing for better traction and stability depending on load and terrain conditions. However, the tire choices may affect the tractor’s overall width and ground clearance, which can be a consideration when operating in uneven or restricted areas.
| Ag fron |
6.00-16 |
| Ag rea |
13.6-38/15.5-38/11-38/12-38 |
DIMENSIONS & TIRES
The John Deere 630 tractor has a wheelbase of 90 inches, providing stability and maneuverability, ideal for varied agricultural applications. Weighing 5,858 lbs, it can effectively handle larger implements, but be mindful of soil compaction in sensitive terrains. The front tires sized 6.00-16 and rear tires 12.4-38 offer a good balance between traction and flotation, suitable for both field and transport work.
| Wheelbas |
90inches / 228cm |
| Weigh |
5,858lbs / 2657kg |
| Front tir |
6.00-16 |
| Rear tir |
12.4-38 |
630 SERIAL NUMBERS
| 195 |
6302749 |
| 196 |
6314381 |
| Fina |
6318206 |
630 SERIAL LOCATION
| Description |
Serial number plate on the right side of the 630 tractor frame, below the belt pulley |
ELECTRICAL
| Groun |
positive |
| Batterie |
2 |
| Battery volt |
6 |
