| Manufacturer |
John Deere |
| Price |
38,512(USD) |
| Model |
5075M |
| Equipment Type |
Utility Tractors |
| Factory |
Augusta, Georgia, USA |
KEY SPECS
| Engine description |
John Deere PowerTech 3029 |
| Engine displacement |
3 cylinder: 2.9 L/179 cu in. |
| Rated engine power |
At 2200 rpm per ISO 97/68/EC: 55.1 kW/73.8 hp |
| Rated PTO power (hp SAE) |
At 2100 rpm per SAE: 43 kW/57.7 PTO hp |
| Transmission type |
Standard: 16F/16R PowrReverser/Optional: 12F/4R SyncShuttle Plus/32F/16R PowrReverser Plus |
| Hydraulic pump rated output |
Standard: 94 L/min/24.7 gpm |
| Rear hitch category (SAE designation) |
Category 2; convertible to 1 |
ENGINE SPECIFICATIONS
The John Deere 5075M features a 2.9L turbocharged engine with air-to-air aftercooling, maximizing power output and fuel efficiency while minimizing emissions under Final Tier 4 standards. The wet-sleeved cylinder liners allow for easier maintenance and replacement, providing longevity and flexibility in servicing. However, operators should be aware that the turbocharging system requires regular monitoring to prevent lag and ensure optimal performance in demanding agricultural scenarios.
| Description |
John Deere PowerTech 3029 |
| Engine family |
EJDXL03.0208 |
| Aspiration |
Turbocharged and Air-to-Air Aftercooled |
| Cylinders liners |
Wet sleeved |
| Emission level |
Final Tier 4 |
| Displacement |
3 cylinder: 2.9 L/179 cu in. |
ENGINE PERFORMANCE
The John Deere 5075M tractor, with a rated power of 55.1 kW (73.8 hp) at 2200 rpm, offers efficient performance suitable for various agricultural tasks. Its rated PTO power of 57.7 hp provides sufficient torque for implements, while a PTO torque rise of 27.2 percent at 1400 rpm enhances its ability to handle heavier loads during initial operation. A potential challenge could be its optimal performance range, necessitating careful RPM management to maximize torque and efficiency, especially when using demanding attachments.
| Rated power |
At 2200 rpm per ISO 97/68/EC: 55.1 kW/73.8 hp |
| Rated PTO power (hp SAE) |
At 2100 rpm per SAE: 43 kW/57.7 PTO hp |
| PTO torque rise |
At 1400 rpm: 27.2 percent |
TRANSMISSION
The John Deere 5075M features a versatile transmission system with a standard 16F/16R PowrReverser, allowing for smooth direction changes and adaptability in various driving conditions. The left-hand mechanical reverser enhances operator comfort, especially in applications requiring frequent forward and reverse operations, while the wet clutch design minimizes wear and provides better torque transmission. However, the optional 12F/4R SyncShuttle Plus may limit speed ratios for certain tasks compared to the standard configuration, potentially affecting versatility in time-sensitive operations.
| Type |
Standard: 16F/16R PowrReverser/Optional: 12F/4R SyncShuttle Plus/32F/16R PowrReverser Plus |
| Reverser |
Left hand, mechanical |
| Clutch; wet/dry |
Wet |
| Creeper |
32F/16R PowrReverser |
HYDRAULIC SYSTEM
| Type |
Open Center |
| Pump rated output |
Standard: 94 L/min/24.7 gpm |
| Available flow at a single rear SCV |
70 L/min/18.4 gpm |
| Number of rear selective control valves (SCVs) |
2/up to 3 total |
| Number of mid selective control valves (SCVs) |
2/up to 3 total |
| Joystick SCV control |
Standard |
REAR HITCH
| Hitch draft control load sense type |
Mechanical or electrohydraulic |
| Remote control valves available |
Standard: 2/Optional: 3 |
| Hitch category (SAE designation) |
Category 2; convertible to 1 |
| Maximum lift capacity behind lift points |
Standard: 2578 kg/5685 lb/Optional: 2993 kg/5954 lb |
| Sensing type |
Lower link |
| Rear axle differential lock |
Electrohydraulic |
REAR POWER TAKE-OFF (PTO)
| Type |
Standard: Independent 540/540 Economy/Optional: 540/540E/1000 |
| Engine rpm (at rated PTO speeds) |
540 at 2100 rpm/540E at 1645 rpm |
| PTO actuation |
Electrohydraulic |
FRONT HITCH
| Category |
Cat 2 |
| Standard lift capacity |
1931 kg/4257 lb |
REAR AXLE
| Final drive type |
Inboard planetary |
| Differential controls |
Electrohydraulic |
| Axle type |
Flanged |
| Brakes, type and control |
Hydraulic wet disc |
TIRES
The John Deere 5075M tractor features versatile wheel options, allowing for improved traction and stability depending on the configuration (2WD vs. MFWD), with a robust rear tire size of 460/85R30 ensuring substantial support for various implements. The wheel tread range provides adjustable configurations, crucial for different applications such as row cropping or general field work, enhancing adaptability in diverse soil conditions. However, a tighter turning radius (3.67 m for 2WD) may limit maneuverability in confined spaces compared to MFWD (3.85 m), so consideration of operational environments is essential.
| Front |
2WD: 11LL-15 8PR F2 Firestone/MFWD: 320/85R24 (12.4R24) R1W Radial Firestone |
| Rear |
2WD: 460/85R30 (18.4R30) R1W Firestone/MFWD: 460/85R30 (18.4R30) R1W Firestone |
| Wheel tread range |
2WD: front: 1520-2020 mm/59.8-79.5 in./rear: 1349-2055 mm/53.1-80.9 in./MFWD: front: 1299-1997 mm/51.1-78.6 in. |
| Turning radius with brakes |
2WD: 3.67 m/12.04 ft/MFWD: 3.85 m/12.6 ft |
| Turning radius without brakes |
2WD: 3.85 m/12.6 ft/MFWD: 4.0 m/13.1 ft |
OPERATOR STATION
| Rollover protective structure, OOS |
Rigid - foldable - telescopic/Foldable, 2-post/Platform - flat/straddle/Flat/Gearshift location - console/floor/Floor/ |
| Seat |
Standard: Mech suspension/Optional: air ride |
| Instructional seat |
Optional |
| Radio |
opt |
| dB(A) rating |
78 dBA |
DIMENSIONS
| Wheelbase |
2WD and MFWD: 2350 mm/92.5 in. |
| Approximate shipping weight, Open;Cab |
2WD: Open: 3700 kg/8140 lb/Cab: 3900 kg/8580 lb/MFWD: Open: 3975 kg/8765 lb/Cab: 4175 kg/9185 lb |
CAPACITIES
| Fuel tank |
Standard: Open: 111.9 L/29.6 U.S. gal./Cab: 139.1 L/36.7 U.S. gal./Optional: open: 141.2 L/37.3 U.S. gal./Cab: 170.3 L/45 U.S. gal. |
MISCELLANEOUS
| Country of manufacture |
Augusta, GA |
ADDITIONAL INFORMATION
