| Manufacturer |
John Deere |
| Price |
- |
| Model |
4210 |
| Equipment Type |
Compact Utility Tractors |
| Factory |
Augusta, Georgia, USA |
ENGINE DETAIL
The John Deere 4210 is powered by a Yanmar 3TNE82A diesel engine with a displacement of 1.3L, providing a gross output of 27hp at a rated RPM of 2600, ideal for light to moderate agricultural tasks. Its dry air cleaner and a high compression ratio of 18.5:1 contribute to efficient fuel combustion, but may require careful maintenance to prevent dust accumulation. With a relatively low oil capacity of 4.0 quarts, routine servicing is crucial to ensure optimal performance and longevity, particularly in demanding operating conditions.
| Description |
Yanmar 3TNE82A diesel 3-cylinder liquid-cooled |
| Displacement |
81.2ci / 1.3L |
| Bore/Stroke |
3.23x3.31inches / 82x 84mm |
| Power (gross) |
27hp / 20.1kW |
| Air cleaner |
dry |
| Compression |
18.5:1 |
| Rated RPM |
2600 |
| Idle RPM |
1000-2810 |
| Starter volts |
12 |
| Starter power |
1.6hp / 1.2kW |
| Oil capacity |
4.0qts / 3.8L |
| Coolant capacity |
5.6qts / 5.3L |
JOHN DEERE 4210 ENGINE
The John Deere 4210 is equipped with a Yanmar 1.3L 3-cylinder diesel engine, providing robust power for small to medium farming tasks with improved fuel efficiency. Key advantages include its compact size for maneuverability in tight spaces and its lower operating costs due to the efficient engine. However, its smaller displacement may limit performance in heavy-duty applications or on larger fields, requiring careful consideration of operational requirements.
| Description |
Yanmar 1.3L 3-cyl diesel |
TRANSMISSIONS OVERVIEW
The John Deere 4210 features a 9-speed partially synchronized hydrostatic transmission, allowing for smooth transitions between speeds, ideal for varied agricultural tasks requiring precision. This system offers advantages in maneuverability and ease of operation, particularly in tight spaces or when performing different field tasks. However, users may face challenges in maximizing torque output under heavy load conditions, necessitating careful speed selection to maintain efficiency.
| Description |
9-speed partially synchronized hydrostatic |
TRANSMISSION 1
The John Deere 4210 features a SyncShift transmission, offering 9 forward and 3 reverse gears with three selectable ranges (A-C). This partially synchronized system allows for on-the-move gear shifting with the clutch, enhancing operational efficiency, but requires the tractor to be stationary for range changes, which may limit flexibility during field operations. Users should also consider the 25.2-quart oil capacity for optimal lubrication and performance.
| Transmission |
SyncShift |
| Type |
partially synchronized |
| Gear |
9 forward and 3 reverse |
| Oil capacity |
25.2qts / 23.8L |
| Description |
Three gears (1-3) plus reverse in three ranges (A-C). Gears can be shifted on the move using the clutch. Tractor must be stopped to shift ranges |
SPEEDS 1
| Description |
With 12.4-16 rear tires |
TRANSMISSION 2
The John Deere 4210 features an eHydro transmission, providing infinite forward and reverse speeds across three ranges, which allows for smooth and adaptable operation. Key advantages include the LoadMatch, SpeedMatch, and MotionMatch options, enhancing efficiency under varying load conditions and allowing tailored acceleration rates for different tasks. However, note that shifting ranges requires the tractor to be stopped, potentially limiting operational fluidity during certain applications.
| Transmission |
eHydro |
| Type |
hydrostatic |
| Gear |
infinite forward and reverse (3-range) |
| Oil capacity |
27.2qts / 25.7L |
| Description |
Three-range hydrostatic transmission with foot pedals and cruise control. Tractor must be stopped to shift ranges. Automotive cruise control option allows set speed to be adjusted with rocker switch. SpeedMatch option allows a maximum speed to be set and full pedal travel used to achive that speed. LoadMatch option prevents the tractor from stalling during heavy loads. The MotionMatch option enables the acceleration rate to be set to fast or slow |
SPEEDS 2
| Description |
With 12.4-16 rear tires |
JOHN DEERE 4210 TRANSMISSIONS
The John Deere 4210 features a 9-speed partially synchronized hydrostatic transmission, providing smooth operation and efficient power management for versatile applications. This setup allows for seamless gear shifts, enhancing productivity in varied terrain, although it may present challenges in precise speed control compared to fully synchronized options. Ideal for both agricultural and utility tasks, the 4210 offers a balance of user-friendly operation and robust performance in demanding environments.
| Description |
9-speed partially synchronized hydrostatic |
MECHANICAL
The John Deere 4210 offers versatile two- or four-wheel drive capabilities, enhancing traction in various terrains, though the mechanical differential lock may require manual engagement which could be a slight inconvenience in muddy conditions. Its wet disc brakes provide superior stopping power and reduced maintenance compared to traditional dry brakes, promoting safety during heavy use. The power steering feature ensures ease of maneuverability, making the tractor well-suited for both small farms and larger agricultural applications.
| Description |
Two- or four-wheel drive Wet disc brakes Two-post ROPS. Foldable ROPS optional |
| Differential lock |
mechanical |
| Steering |
power |
CAPACITY
| Fuel |
10gal / 37.9L |
| Hydraulic system |
6.3gal (gear) / 23.8L 6.8gal (hydro) / 25.7L |
| Front axle |
4.7qts / 4.4L |
HYDRAULICS
| Type |
open center |
| Capacity |
6.3gal (gear) / 23.8L 6.8gal (hydro) / 25.7L |
| Pressure |
2125psi / 146.5bar |
| Valve |
5 |
| Pump flow |
7.0gpm / 26.5lpm |
| Total flow |
12.3gpm / 46.6lpm |
| Steering flow |
5.3gpm / 20.1lpm |
TRACTOR HITCH
| Rear Type |
I |
| Rear lift (at 24) |
1,700lbs / 771kg |
POWER TAKE-OFF (PTO)
| Rear PTO |
independent |
| Rear RPM |
540 |
| Mid PTO |
optional |
| Mid RPM |
2100 |
JOHN DEERE 4210 TIRES
The John Deere 4210 tractor features a tire configuration that optimizes traction and stability, with 4.00-15 (2WD) or 7.00-14 (4WD) front tires and 11.2-24 rear tires suited for various agricultural applications. The 2WD may be advantageous for lighter tasks like mowing or tilling, while the 4WD option significantly enhances traction and maneuverability in challenging terrains, such as wet fields. However, the choice between 2WD and 4WD also affects fuel efficiency and maintenance costs, as 4WD systems generally require more upkeep.
| Ag front |
4.00-15 (2WD) / 7.00-14 (4WD) |
| Ag rear |
11.2-24 |
DIMENSIONS & TIRES
The John Deere 4210’s wheelbase of 65 inches provides enhanced maneuverability in tight spaces, beneficial for small to medium-sized farms. Weighing between 2,375 to 2,675 pounds, this tractor offers a balance of stability and portability, advantageous for various land types, but may limit its towing capacity compared to heavier models. The front 4.00-15 and rear 11.2-24 tire sizes indicate a suitable design for light to medium-duty applications, though users should consider potential traction challenges in soft or uneven terrain.
| Wheelbase |
65inches / 165cm |
| Weight |
2375 to 2675 pounds |
| Front tire |
4.00-15 |
| Rear tire |
11.2-24 |
4210 SERIAL NUMBERS
4210 SERIAL LOCATION
| Description |
On right side of tractor frame above the front axle |
ELECTRICAL
| Ground |
negative |
| Charging system |
alternator |
| Charging amps |
40/55 (optional) |
| Battery CCA |
500 |
| Battery volts |
12 |
