| Manufacturer | John Deere |
| Price | 32,338(USD) |
| Model | 4052M |
| Equipment Type | Compact Utility Tractors |
| Factory | Augusta, Georgia, USA |
KEY SPECS
| Engine power (gross) | 37.9 kW/51.5 hp/PS at 2600 rpm/SAE J1995 rated power |
| Power take-off (PTO) power | PowrReverser transmisison: 30.5 kW/40.8 hp/eHydro transmission: 30.5 kW/Per SAE J1995 |
| Steering hydraulics | 23.5 L/min/6.2 gpm |
| Implement hydraulics | 42.3 L/min/11.2 gpm |
| Hitch type | Category 1 |
| Lift capacity, 24-in. behind link arms | 1135 kg/2500 lb |
| Standard transmission; forward/reverse | PowrReverser transmission |
| Cruise control | Optional |
| Approximate shipping weight (open-station; cab) | Open operator station (OOS): 1703 kg/3754 lb/Cab: Not applicable |
| Wheelbase | 185.5 cm/73 in. |
ENGINE
The John Deere 4052M, with a Yanmar-engineered turbocharged four-cylinder setup, delivers a gross power of 37.9 kW at 2600 rpm, optimizing performance for both agricultural and utility applications. Its high-pressure common rail direct injection system ensures efficient fuel combustion, contributing to its Final Tier 4 emissions compliance while maintaining a respectable torque output of 139 Nm. The 56.9 L fuel tank supports extended operation, but users should account for the specific needs of tasks as PTO power is limited to 30.5 kW, potentially affecting performance when powering heavier implements.
| Family | EYDXL2.09TDA/FYDXL2.09TDA/GYDXL2.09TDA |
| Manufacturer | Yanmar® |
| Engine model | 4TNV86CT-MJT |
| Engine power (gross) | 37.9 kW/51.5 hp/PS at 2600 rpm/SAE J1995 rated power |
| Power take-off (PTO) power | PowrReverser transmisison: 30.5 kW/40.8 hp/eHydro transmission: 30.5 kW/Per SAE J1995 |
| Rated engine speed | 2600 rpm |
| Type | Diesel |
| Injection pump type | High pressure common rail direct injection |
| Aspiration | Turbocharged |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement | 4 / 2.091 L/4 / 127.6 cu in. |
| Number of cylinders | Four |
| Cylinder liners | Cast-in-block |
| Bore and stroke | 86 x 90 mm/3.4 x 3.54 in. |
| Compression ratio | 19.1:1 |
| Lubrication | Pressurized |
| Cooling system | Liquid |
| Air cleaner | Dual element |
| Engine torque at rated speed | 139 Nm/102.5 lb-ft |
| Fuel tank capacity | 56.9 L/15 U.S. gal. |
ELECTRICAL
| Battery size | 770 CCA |
| Alternator (12-V) | 75 amp |
| Starter size | 2 kW/2.68 hp |
FUEL SYSTEM
| Type | High pressure common rail direct injection |
TRANSMISSION
The John Deere 4052M tractor features a PowrReverser transmission providing 12 forward and 12 reverse speeds, offering enhanced maneuverability, especially in tight spaces. The optional eHydro transmission offers infinitely-variable three ranges, facilitating smooth operation across varied terrains. Key advantages include a robust planetary final drive for improved torque distribution and multi-plate wet disc brakes ensuring reliable stopping power, while challenges could arise in maintenance of the wet clutch system.
| Standard transmission; forward/reverse | PowrReverser transmission |
| Optional transmission; forward/reverse | eHydro transmission |
| Left-hand reverser | PowrReverser transmission only |
| Transmission gear ranges | PowrReverser: 12F/12R/eHydro: Infinitely-variable three range |
| Final drive | Planetary |
| Brakes | Multi-plate wet disc |
| Steering | Hydrostatic power steering |
| Clutch, wet/dry | Wet |
| Clutch disk diameter wet clutch | 129 mm/5.08 in. |
| Axle capacity | Front/1600 kg/3528 lb/Rear/2400 kg/5292 lb/ |
| Cruise control | Optional |
| Differential lock | Yes |
HYDRAULICS
| Type | Open center |
| Pump rated output | Steering/23.5 L/min/6.2 gpm/Implement/42.3 L/min/11.2 gpm/65.8 L/min/17.4 gpm |
| Pump type | Single gear |
| Draft control sensing | Position control |
| Remote control valves available | Up to three rear remotes |
3-POINT HITCH
| Type | Category 1 |
| Lift capacity, 24-in. behind link arms | 1135 kg/2500 lb |
POWER TAKE-OFF (PTO)
| Standard | Independent 540 rpm at 2600 rpm |
| Control | Position |
| Clutch | Wet disc |
FLUID CAPACITIES
| Crankcase with filter | 5.3 L/1.4 qt |
| Transmission and hydraulic system | 47.3 L/12.5 gal. |
FINAL DRIVE
| Type | Planetary |
| Differential lock | Yes |
OPERATOR STATION
| Rollover protective structure | Type/Foldable/Yes |
| Platform - flat/straddle | Flat |
| Gear shift location - console/floor | PowrReverser - Left-hand side |
DIMENSIONS
| Wheelbase | 185.5 cm/73 in. |
| Front axle clearance | 25.1 cm/13.8 in. |
| Turning radius with brakes | 2.8 m/9.19 ft |
| Turning radius without brakes | 3 m/9.84 ft |
| Approximate shipping weight (open-station; cab) | OOS: 1703 kg/3754 lb/Cab: Not applicable |
TIRES
The John Deere 4052M features interchangeable tire options, offering versatility for farming, turf, or industrial applications, which enhances its adaptability to various terrains. The front tread range of 148.1 cm and rear tread spacing of 137.2 cm provide stability and maneuverability, ideal for operations in tight spaces. However, careful tire selection is crucial as improper choices may lead to compromised traction or soil compaction, especially in specialized tasks such as precision farming or landscaping.
| Front | Farm - 8-16/Turf - 27x10.5-15/Industrial - 10-16.5 |
| Rear | Farm - 13.6-28/Turf - 44x18-20 or 22.5LL-16.1/Industrial - 16.9Lx24 |
| Front tread range | 148.1 cm/58.3 in. |
| Rear tread spacing | 137.2 cm/54 in. |