| Manufacturer |
John Deere |
| Price |
27,222(USD) |
| Model |
3039R |
| Equipment Type |
Compact Utility Tractors |
| Factory |
Augusta, Georgia, USA |
KEY SPECS
| Engine power (gross) |
SAE J1995 rated power: 28.5 kW/38.2 hp/38.7 PS |
| Power take-off (PTO) power |
PowrReverser transmission: 24.4 kW/32.8 hp/eHydro transmission: 22.2 kW/29.8 hp |
| Steering hydraulics |
23.5 L/min/6.2 gpm |
| Implement hydraulics |
34.3 L/min/9.1 gpm |
| Hitch type |
Category 1 |
| Lift capacity, 24-in. behind link arms |
995 kg/2194 lb |
| Standard transmission; forward/reverse |
PowrReverser transmission |
| Cruise control |
PowrReverser transmission: Not applicable/eHydro transmission: Standard |
| Approximate shipping weight (open-station; cab) |
Open operator station (OOS) PowrReverser transmission: 1363 kg/3005 lb/OOS eHydro trasmission: 1382 kg/3047 lb/Cab eHydro transmission only: 1676 kg/3695 lb |
| Wheelbase |
1727 mm/68 in. |
ENGINE
The John Deere 3039R features a compact Yanmar® 3TNV86CT-MJT diesel engine with a gross power output of 28.5 kW, ensuring efficiency for various agricultural tasks. Its turbocharged configuration, combined with a high-pressure common rail direct injection system, enhances torque (105 Nm) and power delivery, optimizing performance under load while complying with Final Tier 4 emissions standards. Notably, the tractor's PTO power varies depending on the transmission type, which may influence implement selection and operational efficiency; 24.4 kW for the PowrReverser and 22.2 kW for the eHydro transmission.
| Manufacturer |
Yanmar® |
| Engine model |
3TNV86CT-MJT |
| Engine power (gross) |
SAE J1995 rated power: 28.5 kW/38.2 hp/38.7 PS |
| Power take-off (PTO) power |
PowrReverser transmission: 24.4 kW/32.8 hp/eHydro transmission: 22.2 kW/29.8 hp |
| Rated engine speed |
2600 rpm |
| Type |
Diesel |
| Injection pump type |
High pressure common rail direct injection |
| Aspiration |
Turbocharged |
| Emissions compliance |
Final Tier 4 |
| Cylinders/displacement |
Three cylinders: 1.57 L/95.7 cu in. |
| Number of cylinders |
Three |
| Cylinder liners |
Cast-in-block |
| Bore and stroke |
86 x 90 mm/3.4 x 3.54 in. |
| Compression ratio |
19.1:1 |
| Lubrication |
Pressurized |
| Cooling system |
Liquid |
| Air cleaner |
Dual element |
| Engine torque at rated speed |
105 Nm/77.4 lb-ft |
| Fuel tank capacity |
OOS: 37.4 L/10 U.S. gal./Cab eHydro transmission only: 47.6 L/12.6 U.S. gal. |
ELECTRICAL
| Battery size |
500 CCA |
| Alternator (12-V) |
75 amp |
| Starter size |
1.4 kW/1.9 hp |
FUEL SYSTEM
| Type |
High pressure common rail direct injection |
TRANSMISSION
The John Deere 3039R tractor offers versatile transmission options with the 12F/12R PowrReverser and eHydro systems, allowing for efficient operation across varying terrains and tasks; the eHydro features infinitely variable control and standard cruise control for enhanced convenience. Its robust wet disk braking system and hydrostatic power steering deliver responsive handling and braking, suitable for both heavy-duty applications and tight maneuvers. Notably, the axle capacities (1450 kg front and 1850 kg rear) support substantial load-bearing, while challenges may arise with the standard non-applicability of cruise control in the PowrReverser configuration, potentially impacting operator comfort in prolonged driving scenarios.
| Standard transmission; forward/reverse |
PowrReverser transmission; 12F/12R |
| Optional transmission; forward/reverse |
eHydro transmission |
| Left-hand reverser |
PowrReverser transmission only |
| Transmission gear ranges |
PowrReverser transmission: 12F/12R/eHydro transmission: three-range, infinitely variable |
| Final drive |
Spur gear |
| Brakes |
Wet disk |
| Steering |
Hydrostatic power steering |
| Clutch, wet/dry |
PowrReverser transmission: Wet disk |
| Axle capacity |
Front/1450 kg/3197 lb/Rear/1850 kg/4079 lb/ |
| Cruise control |
PowrReverser transmission: Not applicable/eHydro transmission: Standard |
HYDRAULICS
| Type |
Open center |
| Pump rated output |
Steering/23.5 L/min/6.2 gpm/Implement/34.3 L/min/9.1 gpm/57.8 L/min/15.3 gpm |
| Pump type |
Single gear |
| Maximum operating pressure |
172 bar/2495 psi |
| Draft control sensing |
Position control |
| Remote control valves available |
Up to six rear remotes |
3-POINT HITCH
| Type |
Category 1 |
| Lift capacity, 24-in. behind link arms |
995 kg/2194 lb |
POWER TAKE-OFF (PTO)
| Standard |
Independent rear: 540 rpm |
| Optional |
PowrReverser transmission: Mid - not applicable/eHydro transmission: Mid - 2100 rpm |
| Control |
Lever and switch |
| Clutch |
Wet disk |
| Brake (for mid and rear PTO) |
Wet disk |
FLUID CAPACITIES
| Crankcase with filter |
4.3 L/4.5 qt |
| Transmission and hydraulic system |
PowrReverser transmission: 24.6 L/6.5 U.S. gal./eHydro transmission: 26.5 L/7 gal./Cab eHydro transmission only: 26.5 L |
FINAL DRIVE
OPERATOR STATION
| Rollover protective structure |
Type/Foldable/ |
| Platform - flat/straddle |
One-piece semi flat |
| Gear shift location - console/floor |
PowrReverser transmission: Right-hand side/eHydro transmission: Not applicable |
CAB
| Compliance |
Complies with OSHA, SAE, and CSA standards for rollover protection |
| Visibility |
360 degree (angle) |
| Doors |
Two |
| Noise rating |
80 dBA |
| Seat equipment |
Scissor-link |
DIMENSIONS
| Wheelbase |
1727 mm/68 in. |
| Front axle clearance |
Minimum: 171 mm/6.7 in./Maximum: 299 mm/11.8 in. |
| Turning radius with brakes |
2.7 m/8.8 ft |
| Turning radius without brakes |
2.8 m/9.2 ft |
| Approximate shipping weight (open-station; cab) |
OOS PowrReverser transmission: 1363 kg/3005 lb/OOS eHydro trasmission: 1382 kg/3047 lb/Cab eHydro transmission only: 1676 kg/3695 lb |
TIRES
The John Deere 3039R tractor features versatile tire options, including R1 bar for rough terrain and R3 turf for lawn applications, catering to various operational needs. With a front tread range of 1117 mm and rear spacing of 1031 mm, it offers a stable footprint, enhancing traction and soil protection, particularly beneficial in agricultural and turf maintenance scenarios. However, users should consider the trade-offs between tire types, as R1s provide superior grip while R3s minimize turf damage, impacting performance based on specific land uses.
| Front |
R1 Bar: 7-14/R3 Turf : 27x8.50-15/R3 Turf Special: 25/10.5LLx15/R4 Industrial: 25x8.5-14 or 27x8.5-15 |
| Rear |
R1 Bar: 11.2-24/R3 Turf: 41x14-20/R3 Turf Special: 41x18LL-16.1/R4 Industrial: 15-19.5 or 43x16-20 |
| Front tread range |
1117 mm/44 in. |
| Rear tread spacing |
1031 mm/40.6 in. |
