| Manufacturer |
John Deere |
| Price |
24,642(USD) |
| Model |
3033R |
| Equipment Type |
Compact Utility Tractors |
| Factory |
Augusta, Georgia, USA |
KEY SPECS
| Engine power (gross) |
23.7 kW/32.2 hp/PS at 2600 rpm/SAE J1995 rated power |
| Power take-off (PTO) power |
PRT - 19.5 kW/26.1 hp/eHST - 17.2 kW/23 hp/Per SAE J1995 |
| Steering hydraulics |
23.5 L/min/6.2 gpm |
| Implement hydraulics |
34.3 L/min/9.1 gpm |
| Hitch type |
Category 1 |
| Lift capacity, 24-in. behind link arms |
995 kg/2194 lb |
| Standard transmission; forward/reverse |
PowrReverser transmission (PRT) |
| Cruise control |
Standard |
| Approximate shipping weight (open-station; cab) |
Rollover protective structure (ROPS) - 1315.4 kg/2900 lb/Cab: 1619.3 kg/3570 lb |
| Wheelbase |
172.7 cm/68 in. |
ENGINE
The John Deere 3033R, powered by a Yanmar 3TNV88C-MJT diesel engine, delivers 23.7 kW (32.2 hp) at 2600 rpm with a notable torque of 87 Nm, optimized for efficient operation in various agricultural tasks. Its high-pressure common rail direct injection system ensures better fuel efficiency and lower emissions, meeting Final Tier 4 compliance; however, the reliance on liquid cooling and a pressurized lubrication system may require more maintenance in rigorous environments. The PTO power ratings at 19.5 kW (26.1 hp) for PRT and 17.2 kW (24.3 hp) for eHST provide versatility, making it suitable for both light-duty and moderate applications, though operators should account for fuel tank capacities of 37.4 L (ROPS) and 47.6 L (Cab) when planning extended use.
| Family |
EYDXL1.64NDA/FYDXL1.64NDA/GYDXL1.64NDA |
| Manufacturer |
Yanmar |
| Engine model |
3TNV88C-MJT |
| Engine power (gross) |
23.7 kW/32.2 hp/PS at 2600 rpm/SAE J1995 rated power |
| Power take-off (PTO) power |
PRT - 19.5 kW/26.1 hp/eHST - 17.2 kW/24.3 hp/Per SAE J1995 |
| Rated engine speed |
2600 rpm |
| Type |
Diesel |
| Injection pump type |
High pressure common rail direct injection |
| Aspiration |
Natural |
| Emissions compliance |
Final Tier 4 |
| Cylinders/displacement |
3 / 1.64 L/3 / 100 cu in. |
| Number of cylinders |
Three |
| Cylinder liners |
Cast-in-block |
| Bore and stroke |
88x90 mm/3.46x3.54 in. |
| Compression ratio |
19.1:1 |
| Lubrication |
Pressurized |
| Cooling system |
Liquid |
| Air cleaner |
Dual element |
| Engine torque at rated speed |
87 Nm/64.2 lb-ft |
| Fuel tank capacity |
Rollover protective structure (ROPS): 37.4 L/10 U.S. gal./Cab: 47.6 L/12.6 U.S. gal. |
ELECTRICAL
| Battery size |
500 CCA |
| Alternator (12-V) |
75 amp |
| Starter size |
1.4 kW/1.9 hp |
FUEL SYSTEM
| Type |
High pressure common rail direct injection |
| Fuel consumption |
7.6 L/hr/2 U.S. gal. |
TRANSMISSION
The John Deere 3033R tractor features a PowrReverser transmission with 12F/12R gear ranges, allowing operators to quickly switch between forward and reverse, enhancing productivity in tasks like loader operations. Equipped with multi-plate wet disc brakes and hydrostatic power steering, it offers improved control and maneuverability under load. The strong axle capacity (front: 1450 kg; rear: 1850 kg) makes it versatile for various applications, while the optional SpeedMatch creeper gear enhances precision in slow-speed tasks.
| Standard transmission; forward/reverse |
PowrReverser transmission (PRT) |
| Optional transmission; forward/reverse |
PRT only |
| Left-hand reverser |
eHydro transmission (eHST) |
| Transmission gear ranges |
12F/12R PowrReverser (PRT)/3-range, infinitely variable |
| Final drive |
Bull Gear |
| Brakes |
Multi-plate wet disc |
| Steering |
Hydrostatic power steering |
| Clutch, wet/dry |
Wet disc |
| Axle capacity |
Front/1450 kg/3197 lb/Rear/1850 kg/4079 lb/ |
| Creeper |
SpeedMatch optional |
| Cruise control |
Standard |
| Differential lock |
Yes |
HYDRAULICS
| Type |
Open center |
| Pump rated output |
Steering/23.5 L/min/6.2 gpm/Implement/34.3 L/min/9.1 gpm/57.8 L/min/15.3 gpm |
| Pump type |
Single gear |
| Maximum operating pressure |
172.4 bar/2500 psi |
| Draft control sensing |
Position control |
| Remote control valves available |
Up to six rear remotes |
3-POINT HITCH
| Type |
Category 1 |
| Lift capacity, 24-in. behind link arms |
995 kg/2194 lb |
POWER TAKE-OFF (PTO)
| Standard |
Independent Rear - 540 rpm |
| Optional |
Mid - 2100 rpm |
| Control |
Position control |
| Clutch |
Wet disc |
| Brake (for mid and rear PTO) |
Wet disc |
FLUID CAPACITIES
| Crankcase with filter |
4.3 L/4.5 qt |
| Transmission and hydraulic system |
24.6 L/6.5 U.S. gal. |
FINAL DRIVE
OPERATOR STATION
| Rollover protective structure |
Type/Foldable/Yes |
| Platform - flat/straddle |
Flat |
| Gear shift location - console/floor |
PRT - Left-hand side |
CAB
| Compliance |
Complies with OSHA, SAE, and CSA standards for roll-over protection |
| Visibility |
360 degree (angle) |
| Doors |
Two |
| Noise rating |
80 dBA |
| Seat equipment |
Scissor-link |
DIMENSIONS
| Wheelbase |
172.7 cm/68 in. |
| Front axle clearance |
30 cm/11.8 in. |
| Turning radius with brakes |
2.7 m/8.8 ft |
| Turning radius without brakes |
2.8 m/9.2 |
| Approximate shipping weight (open-station; cab) |
ROPS: 1315.4 kg/2900 lb/Cab: 1619.3 kg/3570 lb |
TIRES
The John Deere 3033R features versatile tire configurations, accommodating farm, turf, and industrial applications. Key advantages include adjustable front and rear tread spacing (114 cm front, 103.1 cm rear) which enhance stability and traction across varied terrain, ideal for both agricultural operations and landscaping tasks. However, selecting the wrong tire type for specific applications may result in suboptimal performance and potential soil compaction in sensitive environments.
| Front |
Farm - 7-14/Turf - 27x8.50-15/Turf Special - 25/10.5LLx15/Industrial - 25x8.5-14 or 27x8.5-15 |
| Rear |
Farm - 11.2-24/Turf - 41x14-20/Turf Special - 41x18LL-16.1/Industrial - 15-19.5 or 43x16-20 |
| Front tread range |
114 cm/44.9 in. |
| Rear tread spacing |
103.1 cm/40.6 in. |
