| Manufacturer | John Deere |
| Price | - |
| Model | 2720 |
| Equipment Type | Compact Utility Tractors |
| Factory | Augusta, Georgia, USA |
JOHN DEERE 2720 POWER
| Engine (gross) | 31.4hp / 23.4kW |
| PTO (claimed) | 23.5hp / 17.5kW |
ENGINE DETAIL
The John Deere 2720 tractor, powered by the Yanmar 3TNV88 engine, offers a compact and efficient 31.4 hp at a rated RPM of 2500, making it suitable for a variety of agricultural tasks. Its 19.1:1 compression ratio combined with a dry dual-element air cleaner ensures optimal combustion efficiency and engine life, although operating at higher RPMs can lead to increased wear. Notably, the 1.6L displacement and effective coolant capacity of 4.2 quarts contribute to improved thermal management, enhancing performance during extended use in demanding environments.
| Description | Yanmar 3TNV88 diesel 3-cylinder liquid-cooled |
| Displacement | 100.2ci / 1.6L |
| Bore/Stroke | 3.46x3.54inches / 88x 90mm |
| Rated Power (EC 97/98) | 31.4hp / 23.4kW |
| Air cleaner | dry dual element |
| Compression | 19.1:1 |
| Rated RPM | 2500 |
| Operating RPM | 1200-2650 |
| Starter volts | 12 |
| Starter power | 1.4hp / 1.0kW |
| Coolant capacity | 4.2qts / 4.0L |
ENGINE OIL
The John Deere 2720 tractor has a relatively low oil capacity of 3.6 quarts (3.4 liters), which can facilitate quicker oil changes and reduced maintenance costs. However, this smaller reservoir may increase the frequency of oil checks and top-ups, especially under heavy operational loads. Ensure compliance with the manufacturer's recommended oil type and change intervals to optimize engine performance and longevity.
| Oil capacity | 3.6qts / 3.4L |
JOHN DEERE 2720 ENGINE
The John Deere 2720 is powered by a Yanmar 1.6L 3-cylinder diesel engine, which provides efficient fuel consumption and reliable torque output, making it suitable for light agricultural tasks and gardening. A notable advantage is its compact size, allowing for maneuverability in tight spaces while maintaining a strong hydraulic lift capacity. However, users may face limitations in heavier applications due to its lower displacement compared to larger models.
| Description | Yanmar 1.6L 3-cyl diesel |
TRANSMISSION
The John Deere 2720 features a hydrostatic transmission with infinite gears, allowing for precise speed control, ideal for tasks requiring variable speed and torque. With a 15.6qt oil capacity, it uses Hy-Gard fluid, which enhances performance and extends system life; however, operators must stop the tractor to shift between ranges, which can limit efficiency in continuous operations. This tractor is particularly beneficial for landscaping and light farming tasks where maneuverability and ease of use are paramount.
| Type | hydrostatic |
| Gears | infinite (2-range) forward and reverse |
| Oil capacity | 15.6qts / 14.8L/Hy-Gard |
| Description | Two-range hydrostatic operated with foot pedals. Tractor but be stopped to shift ranges |
MECHANICAL
The John Deere 2720 tractor features a 4x4 MFWD system, offering superior traction in various terrains, making it suitable for both agricultural and landscaping tasks. Its hydrostatic transmission allows for smooth operation and ease of control, particularly beneficial in tight spaces or when precision is required. However, the two-post folding ROPS may limit overhead protection compared to full-frame structures, which could be a consideration in safety-conscious environments.
| Chassis | 4x4 MFWD 4WD |
| Final drives | spur gear |
| Steering | power |
| Brakes | wet disc |
| Cab | Two-post folding ROPS |
| Transmission | hydrostatic |
CAPACITY
| Fuel | 7.1gal / 26.9L |
| Front axle | 4.1qts / 3.9L |
HYDRAULICS
| Type | open center |
| Pressure | 2421psi / 166.9bar |
| Valves | 2 |
| Pump flow | 5.0gpm / 18.9lpm |
| Total flow | 10.5gpm / 39.7lpm |
| Steering flow | 5.5gpm / 20.8lpm |
TRACTOR HITCH
| Rear Type | I |
| Control | position control |
| Rear lift (at ends) | 1433lbs / 650kg |
| Rear lift (at 24 | 1250lbs / 567kg |
POWER TAKE-OFF (PTO)
| Rear PTO | independent |
| Rear RPM | 540 |
| Mid RPM | 2100 |
JOHN DEERE 2720 TIRES
The John Deere 2720 tractor features versatile tire configurations, including lawn/turf and industrial options, enhancing adaptability for various terrains. The 23x8.5-12 front tires in both configurations provide stability and traction, while the rear sets, with a larger 36x14.00-15 for turf and 14-17.5 for industrial, improve load distribution and handling. This flexibility allows users to switch between lawn care and industrial tasks, though careful consideration of tire wear and performance based on intended use is essential.
| Lawn/turf front | 23x8.5-12 |
| Lawn/turf rear | 36x14.00-15 |
| Industrial front | 23x8.5-12 |
| Industrial rear | 14-17.5 |
DIMENSIONS
| Wheelbase | 65.2inches / 165cm |
| Length | 108.9inches / 276cm |
| Width | 39.2inches / 99cm (min) 52.6inches / 133cm (max) |
| Operating weight | 1,973lbs / 894kg |
| Max weight | 4,366lbs / 1980kg |
| Clearance (front axle) | 13inches / 33cm |
| Clearance (drawbar) | 11inches / 27cm |
| Front tread | 32.7inches / 83cm |
| Rear tread | 37.6inches / 95cm |
JOHN DEERE 2720 HEIGHT
| Hood | 47.2inches / 119cm |
| ROPS | 89.7inches / 227cm 68.9inches / 175cm *Folded |
DIMENSIONS & TIRES
The John Deere 2720 tractor, with a wheelbase of 65.2 inches, offers enhanced stability for various agricultural tasks, particularly in tight maneuvering situations. Weighing 1,973 lbs, it strikes a balance between mobility and power, facilitating effective operation on softer soils without significant compaction. However, the relatively low weight may limit its performance in heavy-duty tasks compared to larger models.
| Wheelbase | 65.2inches / 165cm |
| Weight | 1,973lbs / 894kg |
ATTACHMENT OVERVIEW
| Description | Front-end loader Backhoe |
JOHN DEERE 200CX LOADER
| Height (to pin) | 78.5inches / 199cm |
| Dump reach | 29.5inches / 74cm |
| Dump angle | 38° |
| Rollback angle | 25° |
| Breakout force (at pin) | 2239lbs / 1015kg |
| Lift to full height (at pin) | 902lbs / 409kg |
| Raise time to height | 3.19 s |
| Bucket dump time | 3.19 s |
| Lowering time | 1.95 s |
| Rollback time | 1.95 s |
JOHN DEERE 46 BACKHOE
| Backhoe type | John Deere 46 Backhoe |
2720 SERIAL NUMBERS
| Location | Main frame above right front tire |
ELECTRICAL
| Ground | negative |
| Charging system | alternator |
| Charging amps | 40 |
| Battery CCA | 500 |
| Battery volts | 12 |