| Manufacturer |
John Deere |
| Price |
21,340(USD) |
| Model |
3032E |
| Equipment Type |
Compact Utility Tractors |
| Factory |
Augusta, Georgia, USA |
KEY SPECS
| Engine power (gross) |
22.9 kW/31.2 hp |
| Power take-off (PTO) power |
18.6 kW/25 hp |
| Steering hydraulics |
15 L/min/4 gpm |
| Implement hydraulics |
20.2 L/min/5.3 gpm |
| Hitch type |
Category 1 |
| Lift capacity, 24-in. behind link arms |
615.1 kg/1356 lb |
| Standard transmission; forward/reverse |
Hydrostatic transmission (HST) |
| Cruise control |
Optional |
| Approximate shipping weight (open-station; cab) |
1007.9 kg/2222 lb |
| Wheelbase |
159.5 cm/62.8 in. |
ENGINE
The John Deere 3032E, powered by a Yanmar 3TNV88C-NJT engine, offers 31.2 hp with notable efficiency in small-scale operations due to its compact design and high-pressure common rail direct injection. Its Final Tier 4 compliance ensures reduced emissions, making it suitable for environmentally sensitive applications, while the 28.5 L fuel tank capacity supports extended operating hours. However, with only 87 Nm of torque, users may face challenges in heavier-duty tasks, necessitating careful consideration of application suitability.
| Family |
EYDXL1.64NDA/FYDXL1.64NDA/GYDXL1.64NDA |
| Manufacturer |
Yanmar |
| Engine model |
3TNV88C-NJT |
| Engine power (gross) |
22.9 kW/31.2 hp |
| Power take-off (PTO) power |
18.6 kW/25 hp |
| Rated engine speed |
2500 rpm |
| Type |
Diesel |
| Injection pump type |
High pressure common rail direct injection |
| Aspiration |
Natural |
| Emissions compliance |
Final Tier 4 |
| Cylinders/displacement |
3 / 1.64 L/3 / 100.2 cu in. |
| Number of cylinders |
Three |
| Cylinder liners |
Cast-in-block |
| Bore and stroke |
88 x 90 mm/3.46 x 3.54 in. |
| Compression ratio |
19.1:1 |
| Lubrication |
Pressurized |
| Cooling system |
Water pump |
| Air cleaner |
Dual element |
| Engine torque at rated speed |
87 Nm/64.2 lb-ft |
| Fuel tank capacity |
28.5 L/7.5 U.S. gal. |
ELECTRICAL
| Battery size |
500 CCA |
| Alternator (12-V) |
55 amp |
| Starter size |
1.4 kW/1.9 hp |
FUEL SYSTEM
| Type |
High pressure common rail direct injection |
TRANSMISSION
The John Deere 3032E features a hydrostatic transmission, allowing for seamless speed modulation in both forward and reverse without the need for shifting, providing enhanced maneuverability in tight spaces. The wet disc brakes offer superior stopping power and reduced maintenance compared to conventional brakes, while the power steering enhances operator comfort during prolonged use. With a substantial axle capacity of 798 kg (front) and 1197 kg (rear), this tractor is well-suited for medium-duty tasks such as loader work and light tillage, although the absence of a creeper gear may limit its performance in extremely low-speed applications such as precision ground engaging operations.
| Standard transmission; forward/reverse |
Hydrostatic transmission (HST) |
| Left-hand reverser |
No |
| Final drive |
Bull Gear |
| Brakes |
Wet disc |
| Steering |
Power steering |
| Axle capacity |
Front/798 kg/1760 lb/Rear/1197 kg/2640 lb/ |
| Creeper |
No |
| Cruise control |
Optional |
| Differential lock |
Yes |
HYDRAULICS
| Type |
Open center |
| Pump rated output |
Steering/15 L/min/4 gpm/Implement/20.2 L/min/5.3 gpm/35.2 L/min/9.3 gpm |
| Pump type |
Dual gear |
| Maximum operating pressure |
172.4 bar/2500 psi |
| Draft control sensing |
Position control |
| Remote control valves available |
Up to two (optional) |
3-POINT HITCH
| Type |
Category 1 |
| Lift capacity, 24-in. behind link arms |
615.1 kg/1356 lb |
POWER TAKE-OFF (PTO)
| Standard |
540 rpm at 2500 rpm |
| Control |
Independent |
| Clutch |
Wet disk |
| Brake (for mid and rear PTO) |
Wet disk |
FLUID CAPACITIES
| Crankcase with filter |
4.5 L/4.8 qt |
FINAL DRIVE
OPERATOR STATION
| Rollover protective structure |
Type/Foldable/ASABE S478 |
| Platform - flat/straddle |
Semi-flat |
| Gear shift location - console/floor |
Left-hand side |
DIMENSIONS
| Wheelbase |
159.5 cm/62.8 in. |
| Front axle clearance |
36.3 cm/14.3 in. |
| Turning radius without brakes |
2.9 m/9.4 ft |
| Approximate shipping weight (open-station; cab) |
1007.9 kg/2222 lb |
TIRES
The John Deere 3032E features versatile tire options, allowing for specialization in various agricultural applications, including farm work and turf management. The choice between different tire sizes, such as Farm tires (7-14, 11.2-24) or Turf tires (27x8.5-15, 41x14-20), enhances traction and stability depending on the terrain, though switching between types may require adjustment of ground clearance and weight distribution. When selecting tires, consider the primary use case: farm tasks may benefit from the aggressive tread of Farm tires, while Turf tires minimize soil compaction in landscaping scenarios.
| Front |
Farm - 7-14/Turf - 27x8.5-15/R4 - 25x8.5-14/R4 - 27x8.5-15 |
| Rear |
Farm - 11.2-24/Turf - 41x14-20/R4 - 15-19.5/R4 - 43x16-20 |
