| Manufacturer |
John Deere |
| Price |
15,066(USD) |
| Model |
1025R |
| Equipment Type |
Compact Tractors |
| Factory |
None |
KEY SPECS
| Engine power (gross) |
SAE J1995 rated power: 17.8 kW/23.9 hp/24.2 PS |
| Power take-off (PTO) power |
12.8 kW/17.2 hp |
| Steering hydraulics |
13.2 L/min/3.5 gpm |
| Implement hydraulics |
13.2 L/min/3.5 gpm |
| Hitch type |
Limited Category 1 |
| Lift capacity, 24-in. behind link arms |
344 kg/758 lb |
| Standard transmission; forward/reverse |
Hydrostatic - two range |
| Cruise control |
Standard |
| Approximate shipping weight (open-station; cab) |
Open station: 706 kg/1556 lb/Cab: 906 kg/1996 lb |
| Wheelbase |
1450 mm/57.1 in. |
ENGINE
The John Deere 1025R features a Yanmar® 3TNV80F-NCJT engine, delivering 17.8 kW (23.9 hp) and 12.8 kW (17.2 hp) for the PTO, ideally suited for light-duty applications and small farm tasks. The engine’s three-cylinder layout and high compression ratio (23.1:1) enhance fuel efficiency and torque output (53.1 Nm), though operating near 3200 rpm may increase wear over time. Its Final Tier 4 emissions compliance ensures environmental standards are met, while the dual-element air cleaner maintains engine performance in diverse conditions, making it advantageous for homeowners and small-scale agricultural use.
| Manufacturer |
Yanmar® |
| Engine model |
3TNV80F-NCJT |
| Engine power (gross) |
SAE J1995 rated power: 17.8 kW/23.9 hp/24.2 PS |
| Power take-off (PTO) power |
12.8 kW/17.2 hp |
| Rated engine speed |
3200 rpm |
| Type |
Diesel |
| Injection pump type |
Indirect injection |
| Aspiration |
Natural |
| Emissions compliance |
Final Tier 4 |
| Cylinders/displacement |
Three cylinders: 1.267 L/77.3 cu in. |
| Number of cylinders |
Three |
| Cylinder liners |
Cast-in-block |
| Bore and stroke |
80 x 84 mm/3.15 x 3.31 in. |
| Compression ratio |
23.1:1 |
| Lubrication |
Pressurized |
| Cooling system |
Water pump |
| Air cleaner |
Dual element with mechanical restriction indicator |
| Engine torque at rated speed |
53.1 Nm/39.2 lb-ft |
| Fuel tank capacity |
24 L/6.3 U.S. gal. |
ELECTRICAL
| Battery size |
500 CCA |
| Alternator (12-V) |
40 amp |
| Starter size |
1.2 kW/1.6 hp |
FUEL SYSTEM
TRANSMISSION
The John Deere 1025R features a hydrostatic transmission with two ranges, providing excellent ease of operation for tasks requiring variable speed control. Its wet disc brakes enhance stopping power under load, while the differential lock improves traction on uneven terrain. However, the absence of a creeper gear may limit its utility for specific low-speed tasks in tight spaces.
| Standard transmission; forward/reverse |
Hydrostatic - two range |
| Left-hand reverser |
No |
| Final drive |
Spur gear |
| Brakes |
Wet disc (left-hand pedal) |
| Steering |
Power |
| Axle capacity |
Front/612 kg/1349 lb/Rear/715 kg/1576 lb/ |
| Creeper |
No |
| Cruise control |
Standard |
| Differential lock |
Yes |
HYDRAULICS
| Type |
Open center |
| Pump rated output |
Steering/13.2 L/min/3.5 gpm/Implement/13.2 L/min/3.5 gpm/24 L/min/6.3 gpm |
| Pump type |
Single gear |
| Maximum operating pressure |
138 bar/2000 psi |
| Draft control sensing |
Position control |
| Remote control valves available |
Three |
3-POINT HITCH
| Type |
Limited Category 1 |
| Lift capacity, 24-in. behind link arms |
344 kg/758 lb |
POWER TAKE-OFF (PTO)
| Standard |
Rear: 540 rpm/Mid: 2100 rpm |
| Control |
Independent |
| Clutch |
Wet disk |
| Brake (for mid and rear PTO) |
Wet disk |
FLUID CAPACITIES
| Crankcase with filter |
2.7 L/2.9 qt |
| Transmission and hydraulic system |
12.3 L/3.2 gal. |
FINAL DRIVE
| Type |
Spur gear |
| Differential lock |
Yes |
OPERATOR STATION
| Rollover protective structure |
Type/Foldable/Yes |
| Platform - flat/straddle |
One-piece semi flat |
| Gear shift location - console/floor |
Left-hand side |
CAB
| Air conditioning, temperature differential |
Heat only |
| Doors |
Two |
| Seat equipment |
Premium seat |
DIMENSIONS
| Wheelbase |
1450 mm/57.1 in. |
| Front axle clearance |
195 mm/7.7 in. |
| Turning radius without brakes |
Outside front tire: 2.51 m/8.2 ft |
| Limited slip differential |
No |
| Approximate shipping weight (open-station; cab) |
Open station: 706 kg/1556 lb/Cab: 906 kg/1996 lb |
TIRES
The John Deere 1025R features a compact design with various tire options (R3 Turf and R4) that enhance versatility for turf care and light-duty construction tasks. The front tread range of 931 mm provides stability, while the rear tread spacing of 895 mm ensures optimal traction on diverse terrains. However, selecting R3 tires may limit off-road performance in muddy conditions compared to the more aggressive R4 tires, making it essential to choose the right tire type based on your primary use case.
| Front |
R3 Turf: 18x8.50-10/R3 Turf Radial: 18x8.50-10/R4: 18x8.5-10 |
| Rear |
R3 Turf: 26x12-12/R4: 26x12-12 |
| Front tread range |
931 mm/36.7 in. |
| Rear tread spacing |
895 mm/35.2 in. |
MISCELLANEOUS
