| Manufacturer |
Ford |
| Price |
6,231(USD) |
| Model |
1110 |
| Equipment Type |
Compact Utility Tractors |
| Factory |
Japan |
FORD 1110 POWER
| Engine (net) |
13hp / 9.7kW |
| PTO (claimed) |
11.5hp / 8.6kW |
| Plows |
1 (12-inch) |
ENGINE DETAIL
The Ford 1110 tractor features a Shibaura LEK 752C engine, notable for its compact design with a 0.7L displacement that supports efficient operation and maneuverability in small to medium-sized agricultural tasks. With its high compression ratio of 23:1, the engine delivers a rated torque of 26.7 lb-ft at 2000 RPM, making it suitable for heavy-duty applications while maintaining a manageable fuel consumption profile. However, the limited oil and coolant capacities (3.5 qts and 3.4 qts respectively) may necessitate more frequent maintenance checks, particularly during extended use or under strenuous conditions.
| Description |
Shibaura LEK 752C diesel 2-cylinder liquid-cooled |
| Displacement |
43.1ci / 0.7L |
| Bore/Stroke |
2.95x3.15inches / 75x 80 mm |
| Air cleaner |
dry |
| Pre-heating |
glow plugs |
| Compression |
23:1 |
| Rated RPM |
2700 |
| Torque |
26.7 lb-ft /36.2 Nm |
| Torque RPM |
2000 |
| Starter volts |
12 |
| Oil capacity |
3.5qts / 3.3L |
| Coolant capacity |
3.4qts / 3.2L |
FORD 1110 ENGINE
The Ford 1110 features a Shibaura 0.7L 2-cylinder diesel engine, known for its compact size and efficient fuel consumption, which makes it suitable for small farming tasks and landscaping operations. One key advantage is its lightweight design, allowing for maneuverability in tight spaces; however, the lower horsepower may limit its performance in heavier applications. Operators should consider the tractor's cooling system and maintenance requirements to ensure optimal operation, particularly during prolonged use.
| Description |
Shibaura 0.7L 2-cyl diesel |
TRANSMISSIONS OVERVIEW
The Ford 1110 tractor features a 10-speed hydrostatic transmission complemented by a 15-speed creeper gear, enabling precise speed control for various tasks such as tilling and mowing. The hydrostatic system offers seamless operation and ease of use, particularly in tight spaces, while the creeper gear facilitates low-speed movements for delicate applications. However, potential challenges include increased complexity in maintenance and potential higher repair costs associated with the hydrostatic system compared to traditional gear transmissions.
| Description |
10-speed gear hydrostatic 15-speed creeper |
TRANSMISSION 1
The Ford 1110 tractor features a gear transmission system with 10 forward and 2 reverse gears, providing versatility for various agricultural tasks. Its 160mm dry disc clutch offers robust engagement but may require more frequent maintenance compared to hydraulic systems. With an oil capacity of 17 quarts (16.1L), adequate lubrication is critical, as it directly impacts drivetrain performance and longevity, especially in extensive operational scenarios.
| Type |
gear |
| Gears |
10 forward and 2 reverse |
| Clutch |
160mm dry disc |
| Oil capacity |
17qts / 16.1L |
| Description |
Five gears in two ranges. |
SPEEDS 1
| Description |
With 8-16 rear tires |
TRANSMISSION 2
The Ford 1110 tractor features a hydrostatic transmission, providing smooth and continuous control of speed and direction, ideal for precision tasks like mowing or tilling. Its infinite (2-range) forward and reverse gears enhance versatility, allowing operators to easily adapt to various terrain and workload demands. However, hydrostatic systems may require more maintenance compared to traditional gear systems, and performance can be affected by temperature during prolonged use.
| Type |
hydrostatic |
| Gears |
infinite (2-range) forward and reverse |
SPEEDS 2
| Description |
With 8-16 rear tires |
TRANSMISSION 3
The Ford 1110 tractor's optional creeper gear enhances its versatility by offering an additional low range, allowing for precise control in tasks requiring slow speeds, such as tilling or planting. With a total of 15 forward and 3 reverse gears, operators benefit from an extensive gear selection for varied working conditions, especially in tight or challenging terrains. While the added complexity of the creeper gear can present a steeper learning curve for new operators, it significantly improves maneuverability and efficiency in specialized applications.
| Type |
creeper |
| Gears |
15 forward and 3 reverse |
| Description |
Optional creeper provides an additional low range to the gear transmission. |
MECHANICAL
The Ford 1110 tractor's 4x4 MFWD capability enhances traction and stability across varied terrain, making it suitable for both farm and light construction tasks. The mechanical rear differential lock and spur gear final drives provide reliable power transfer, although the manual steering may reduce ease of handling in tight spaces compared to power-assisted options. With a choice of 10-speed or 15-speed creeper transmission, operators can optimize speed and torque for precise tasks like tilling or mowing, but this may require more frequent gear shifting.
| Chassis |
4x2 2WD/4x4 MFWD 4WD |
| Final drives |
spur gear |
| Differential lock |
mechanical rear |
| Steering |
manual |
| Brakes |
differential mechanical drum |
| Cab |
Two-post fixed ROPS |
| Transmissions |
10-speed gear hydrostatic 15-speed creeper |
CAPACITY
| Fuel |
4.8gal / 18.2L |
| Hydraulic system |
4.25gal / 16.1L |
HYDRAULICS
| Type |
open center |
| Capacity |
4.25gal / 16.1L |
| Pressure |
1849psi / 127.5bar |
| Total flow |
4.1gpm / 15.5lpm |
TRACTOR HITCH
| Rear Type |
I |
| Control |
position control |
| Rear lift (at ends) |
881lbs / 399kg |
POWER TAKE-OFF (PTO)
| Gear Rear PTO |
transmission |
| Hydro Rear PTO |
live |
| Rear RPM |
540 (1.375) |
| Engine RPM |
540@2570 |
| Hydro Mid PTO |
independent |
| Mid RPM |
1000 |
| Front PTO |
independent |
| Clutch |
electric |
FORD 1110 TIRES
The Ford 1110 tractor offers versatility with its 2WD and 4WD configurations, enhancing traction and stability depending on the task and soil conditions. The standard tire sizes (4-12 front and 8-16 rear for 2WD; 5-12 front and 8-16 rear for 4WD) are optimized for agricultural applications, while the lawn/turf options (20x8.00-10 front and 29x12.00-15 rear) cater to turf management, minimizing soil compaction. Considerations include potential limitations in maneuverability for 2WD models on hilly terrain, while the additional traction provided by 4WD may lead to increased wear on tires with heavy use.
| 2WD Standard tires (ag) |
Front: 4-12. Rear: 8-16 |
| 4WD Standard tires (ag) |
Front: 5-12. Rear: 8-16 |
| Lawn/turf front |
20x8.00-10 |
| Lawn/turf rear |
29x12.00-15 |
DIMENSIONS
| Wheelbase |
55.1inches / 139cm |
| Length |
101.3inches / 257cm |
| Width |
43.3inches / 109cm |
| Height (steering wheel) |
50.4inches / 128cm |
| Height (ROPS) |
50.4inches / 128cm |
| 2WD Weight |
1283lbs / 581kg |
| 4WD Weight |
1396lbs / 633kg |
| Ground clearance |
9.7inches / 24cm |
| 2WD Front tread |
33.9 to 36.2inches / 86to 91 cm |
| 4WD Front tread |
34.6inches / 87cm |
| Rear tread |
35.4/41.3inches / 89/104 cm |
DIMENSIONS & TIRES
The Ford 1110 tractor features a compact wheelbase of 55.1 inches, providing enhanced maneuverability in tight spaces, ideal for small farms and landscaping tasks. Weighing between 1283 and 1396 pounds, it offers stability during operation, but this weight could limit its performance on steeper terrains. Its tire configuration (4-12 front and 8-16 rear) is optimized for traction in lighter soil conditions, although users may need to consider additional weight for heavy-duty applications.
| Wheelbase |
55.1inches / 139cm |
| Weight |
1283 to 1396 pounds |
| Front tire |
4-12 |
| 2WD Rear tire |
8-16 |
ATTACHMENT OVERVIEW
48
| Type |
mid-mount Ford 916/3-blade |
| Cutting width |
48inches / 121cm |
| Type |
rear-mount Ford 930A/3-blade with hydraulic lift |
| Cutting width |
48inches / 121cm |
| Type |
rear-mount Ford 938/1-blade with hydraulic lift |
| Cutting width |
48inches / 121cm |
| Type |
rear-mount Ford 715/two-stage with hydraulic lift |
| Clearing width |
48inches / 121cm |
60
| Type |
mid-mount Ford 916A/3-blade |
| Cutting width |
60inches / 152cm |
FORD 768A LOADER
| Loader weight |
540lbs / 244kg |
| Height (to pin) |
70inches / 177cm |
| Clearance, dumped bucket |
52inches / 132cm |
| Dump reach |
22.5inches / 57cm |
| Dump angle |
40° |
| Reach at ground |
47.6inches / 120cm |
| Rollback angle |
7.5° |
| Breakout force (lift) |
980lbs / 444kg |
| Lift to full height (at pin) |
530lbs / 240kg |
| Bucket width |
40inches / 101cm/48inches / 121cm |
FORD 768B LOADER
| Loader weight |
540lbs / 244kg |
| Height (to pin) |
70inches / 177cm |
| Clearance, dumped bucket |
52inches / 132cm |
| Dump reach |
22.5inches / 57cm |
| Dump angle |
40° |
| Reach at ground |
47.6inches / 120cm |
| Rollback angle |
7.5° |
| Breakout force (lift) |
980lbs / 444kg |
| Lift to full height (at pin) |
530lbs / 240kg |
| Bucket width |
40inches / 101cm/48inches / 121cm |
FORD 757A BACKHOE
| Backhoe type |
Ford 757A Backhoe |
| Transport height |
80inches / 203cm |
| Bucket width |
8 inches /20 cm/13inches / 33cm/16inches / 40cm |
| Digging depth |
76.5inches / 194cm |
| 2-Foot flat digging depth |
74.5inches / 189cm |
| 8-Foot flat digging depth |
40.3inches / 102cm |
| Reach from pivot |
107inches / 271cm |
| Loading height |
70inches / 177cm |
| Dipperstick force |
719lbs / 326kg |
1110 SERIAL NUMBERS
| Location |
Transmission housing, left side |
| 1983 |
UB00001 |
| 1984 |
UB00785 |
| 1985 |
UB01622 |
| 1986 |
UB02107 |
ELECTRICAL
| Ground |
negative |
| Charging system |
alternator |
| Charging amps |
35 |
| Charging volts |
12 |
| Battery volts |
12 |
| Battery AH |
72 |
