| Manufacturer |
Allis Chalmers |
| Price |
750(USD) |
| Model |
10-18 |
| Equipment Type |
- |
| Factory |
West Allis, Wisconsin, USA |
ALLIS CHALMERS 10-18 POWER
| Drawbar (claimed) |
10 hp/7.5 kW |
| Belt (claimed) |
18 hp/13.4 kW |
ENGINE DETAIL
The Allis Chalmers 10-18 features a robust 303 ci (5.0 L) 2-cylinder liquid-cooled gasoline engine, providing ample torque for agricultural tasks while operating efficiently at a low rated RPM of 720. The considerable bore and stroke (5.25x7.00 inches) result in a higher displacement, enhancing its power output and longevity, but the hand-crank starter may pose a challenge for ease of use, especially in demanding conditions. Ideal for vintage farming enthusiasts or collectors, this tractor exemplifies classic engineering in a practical, albeit labor-intensive format.
| Description |
Allis Chalmers/gasoline/2-cylinder/liquid-cooled |
| Displacement |
303 ci/5.0 L |
| Bore/Stroke |
5.25x7.00 inches/133 x 178 mm |
| Rated RPM |
720 |
| Starter type |
hand-crank |
ALLIS CHALMERS 10-18 ENGINE
The Allis Chalmers 10-18 tractor features a 5.0L 2-cylinder gasoline engine, providing sufficient power for various agricultural tasks. Its 17.5-gallon fuel tank offers a good balance between operational range and weight management, making it suitable for longer work periods without frequent refueling. However, the limited cylinder count may lead to reduced torque at lower RPMs compared to 4-cylinder counterparts, which could impact performance in heavy-duty applications.
| Description |
Allis Chalmers 5.0L 2-cyl gasoline |
| Fuel tank |
17.5 gal/66.2 L |
TRANSMISSION
The Allis Chalmers 10-18 tractor features a straightforward gear design, incorporating one forward and one reverse gear, which simplifies operation for beginners but limits speed and versatility for complex tasks. Its single-gear configuration can be advantageous for basic agricultural needs and maneuvering in tight spaces, but users may face challenges in varying terrain or requiring faster transport speeds. Ideal for small-scale farming or light-duty applications, the 10-18 may not meet the demands of larger agricultural operations.
| Type |
gear |
| Gears |
1 forward and reverse |
MECHANICAL
The Allis Chalmers 10-18 tractor features a simple 3x2 2WD chassis, offering basic maneuverability but limited traction on uneven terrain. The manual steering can lead to operator fatigue over extended use, especially in tight spaces, while the 1-speed transmission limits versatility, making it suitable primarily for light agricultural tasks. Ideal for flat, well-maintained fields, this tractor may struggle in diverse farming scenarios where multiple speeds or 4WD capabilities would enhance performance.
| Chassis |
3x2 2WD |
| Steering |
manual |
| Cab |
Open operator station. |
| Transmission |
1-speed gear |
ALLIS CHALMERS 10-18 TIRES
The Allis Chalmers 10-18 tractor, equipped with 56x12 steel agricultural rear wheels, offers robust durability and traction for heavy tillage and field work, making it ideal for commercial farming. However, the rigidity of steel wheels can lead to a harsher ride on uneven terrain and increase soil compaction. For optimal performance, consider using this tractor in applications where stability and load-bearing capacity are critical, such as plowing or cultivating on firmer ground.
DIMENSIONS
| Length |
140 inches/355 cm |
| Width |
77 inches/195 cm |
| Height |
75 inches/190 cm |
| Weight |
4650 lbs/2109 kg |
| Rear axle |
2.9375 inch diameter/74 mm |
DIMENSIONS & TIRES
The Allis Chalmers 10-18 tractor, with a weight of 4,650 lbs (2,109 kg), offers stability for field operations, but may limit maneuverability in tighter spaces. The rear tire size of 56x12 indicates a focus on traction and load distribution, providing effective performance on various terrains. However, the relatively heavy weight may pose challenges for transport on trailers without appropriate equipment.
| Weight |
4650 lbs/2109 kg |
| Rear tire |
56x12 |
BELT PULLEY
| Diameter |
14.5 inches/36 cm |
| Width |
6.5 inches/16 cm |
