| Manufacturer |
John Deere |
| Price |
93,548(USD) |
| Model |
5090R |
| Equipment Type |
Utility Tractors |
| Factory |
Mannheim, Baden-Württemberg, Germany |
KEY SPECS
| Engine description |
John Deere 4045 PowerTech PWL |
| Engine displacement |
4 cylinders: 4.5 L/276 cu in. |
| Rated engine power |
At 2200 per ISO 97/68/EC: 66 kW/90 engine hp |
| Rated PTO power (hp SAE) |
At 2100 per SAE: 57.8 kW/77.5 PTO hp |
| Transmission type |
Standard: 16F/16R CommandQuad manual/Optional: 16F/16R CommandQuad manual with creeper/32F/16R Command8 |
| Hydraulic pump rated output |
Standard: 96.6 L/min/25.5 gpm/Optional: 117.3 L/min/31 gpm |
| Rear hitch category (SAE designation) |
Category 2/1 |
ENGINE SPECIFICATIONS
The John Deere 5090R features a 4.5 L turbocharged inline 4-cylinder PowerTech engine with air-to-air aftercooling, providing efficient air intake and improved performance under load. The wet-sleeved cylinder liners facilitate easy engine overhauls, presenting a significant advantage in maintenance and longevity. However, ensure proper cooling and maintenance practices as turbocharged engines can be sensitive to heat stress, particularly in high-demand scenarios.
| Description |
John Deere 4045 PowerTech PWL |
| Engine family |
FJDXL04.5211 |
| Aspiration |
Turbocharged/air-to-air aftercooled |
| Cylinders liners |
Wet sleeved |
| Displacement |
4 cylinders: 4.5 L/276 cu in. |
ENGINE PERFORMANCE
The John Deere 5090R offers a rated power of 66 kW (90 hp), suitable for various agricultural applications requiring moderate horsepower. Its PTO power of 57.8 kW (77.5 hp) allows for efficient operation of implements, while the 36 rpm torque rise at 1600 rpm provides enhanced performance under load. This combination of specifications makes it an excellent choice for tasks like tillage and baling, but operators should ensure adequate matching of PTO implements to avoid overloading.
| Rated power |
At 2200 per ISO 97/68/EC: 66 kW/90 engine hp |
| Rated PTO power (hp SAE) |
At 2100 per SAE: 57.8 kW/77.5 PTO hp |
| PTO torque rise |
At 1600 rpm: 36 rpm |
TRANSMISSION
The John Deere 5090R features a versatile 16F/16R CommandQuad transmission, with an optional creeper gear, enhancing low-speed maneuverability for tasks like tilling or planting. The standard electronic left-hand reverser allows for smooth direction changes, while an optional joystick reverser can further improve operational comfort. The wet clutch system offers durability and reduced maintenance, but it may have a slightly slower engagement response compared to dry clutches, impacting immediate power transfer in some scenarios.
| Type |
Standard: 16F/16R CommandQuad manual/Optional: 16F/16R CommandQuad manual with creeper/32F/16R Command8 |
| Reverser |
Standard: Left hand, electronic/Optional: Joystick reverser |
| Clutch; wet/dry |
Wet |
| Creeper |
16F/16R CommandQuad manual with creeper |
HYDRAULIC SYSTEM
| Type |
Standard: Open Center/Optional: Pressure-and-flow compensated (PFC) system |
| Pump rated output |
Standard: 96.6 L/min/25.5 gpm/Optional: 117.3 L/min/31 gpm |
| Available flow at a single rear SCV |
Standard: 73 L/min/19.3 gpm/Optional: 100 L/min/26.4 gpm |
| Joystick SCV control |
Optional |
REAR HITCH
| Hitch draft control load sense type |
Electrohydraulic |
| Remote control valves available |
Two, up to four total |
| Hitch category (SAE designation) |
Category 2/1 |
| Maximum lift capacity behind lift points |
Standard: 3038 kg/6697 lb/Optional: 3564 kg/7857 lb |
| Sensing type |
Lower link |
REAR POWER TAKE-OFF (PTO)
| Type |
Standard: 540/540E/1000 |
| Engine rpm (at rated PTO speeds) |
540 at 2100 rpm/540E at 1645 rpm/1000 at 2103 rpm |
| PTO actuation |
Electrohydraulic |
REAR AXLE
| Final drive type |
Inboard planetary |
| Differential controls |
Electrohydraulic |
| Axle type |
Flanged |
| Brakes, type and control |
Hydraulic wet disc |
TIRES
The John Deere 5090R is equipped with MFWD (Mechanical Front Wheel Drive) and R1W radial tires, offering improved traction and stability across diverse terrains. Its wheel tread range of 1148-2000 mm allows for versatile adjustments, beneficial in varying crop row widths and field conditions. However, the turning radius—3.37 m with brakes and 3.7 m without—may limit maneuverability in tight spaces, which is a critical consideration for smaller farms or confined areas.
| Front |
MFWD: 12.4R24 (320/85R24) R1W Radial |
| Rear |
18.4R30 R1W Radial |
| Wheel tread range |
MFWD: 1148-2000 mm/45.2-78.7 in. |
| Turning radius with brakes |
MFWD: 3.37 m/11.1 ft |
| Turning radius without brakes |
MFWD: 3.7 m/12.1 ft |
OPERATOR STATION
DIMENSIONS
| Wheelbase |
MFWD: 2250 mm/88.6 in. |
| Approximate shipping weight, Open;Cab |
MFWD: 4450 kg/9811 lb |
CAPACITIES
| Fuel tank |
Standard: 144 L/38 U.S. gal. |
MISCELLANEOUS
| Country of manufacture |
Augusta, GA |
