| Manufacturer | John Deere |
| Price | - |
| Model | 5075EN |
| Equipment Type | Specialty Tractors |
| Factory | Saltillo, Mexico |
KEY SPECS
| Engine description | John Deere Power Tech 3029 EWX |
| Engine displacement | 3 cylinders: 2.9L / 179cu in |
| Rated engine power | At 2100 rpm: 55kW / 75hp |
| Maximum engine power | 55kW / 75hp |
| Rated PTO power (hp SAE) | At 2100 rpm: OOS 45kW / 60.3hp Cab 43kW / 57.6hp |
| Transmission type | Standard: Power Reverser 12F/12R Optional: Power Reverser 24F/12R |
| Hydraulic pump rated output | 68.8L/min / 18.2gpm |
| Rear hitch category (SAE designation) | Category 2N; convertible to 2 & 1 |
ENGINE SPECIFICATIONS
The John Deere 5075EN is powered by a turbocharged 2.9L (179 cu in) three-cylinder engine that delivers reliable performance at 2100 rpm, making it suitable for a variety of agricultural applications. Its wet-sleeved cylinders facilitate easier maintenance and repairs, while the Final Tier 4 emission standard ensures compliance with stringent environmental regulations. However, the combination of a compact size and robust power can present challenges in extreme operational conditions, necessitating careful power management and possibly affecting fuel efficiency.
| Description | John Deere Power Tech 3029 EWX |
| Engine type | 3029HPY110 |
| Engine family | NJDXL02.9339 |
| Rated speed | 2100 rpm |
| Aspiration | Turbocharged |
| Cylinders liners | Wet sleeved |
| Emission level | Final Tier 4 |
| After treatment type | DOC/DPF |
| Displacement | 3 cylinders: 2.9L / 179cu in |
ENGINE PERFORMANCE
The John Deere 5075EN delivers a rated power of 55 kW (75 hp) at 2100 rpm, with a maximum PTO power of 60.3 hp in open station and 57.6 hp in the cab configuration, allowing for versatile attachment operation. Its engine peak torque of 304 Nm at 1500 rpm provides robust low-end pulling power, essential for heavy tillage or loader applications. However, the lack of a power boost feature may limit performance gains during peak load scenarios, emphasizing the importance of selecting appropriate implements to match its capabilities.
| Rated power | At 2100 rpm: 55kW / 75hp |
| Rated PTO power (hp SAE) | At 2100 rpm: OOS 45kW / 60.3hp Cab 43kW / 57.6hp |
| Power boost | 0 percent |
| Maximum engine power | 55kW / 73.7hp |
| Engine peak torque | At 1500 rpm: 304Nm / 224lb-ft |
| PTO torque rise | 21 percent |
TRANSMISSION
The John Deere 5075EN features a PowrReverser transmission with options for either 12 forward and 12 reverse gears or an enhanced setup of 24 forward and 12 reverse gears, providing versatility in various agricultural tasks. The wet clutch system allows for smoother engagement and reduced wear, advantageous for operations requiring frequent directional changes. The optional creeper gear is beneficial for precise low-speed operations, making it suitable for tasks such as planting or tilling in confined spaces.
| Type | Standard: Powr Reverser 12F/12R Optional: PowrReverser 24F/12R |
| Reverser | Yes |
| Clutch; wet/dry | Wet |
| Creeper | Optional |
HYDRAULIC SYSTEM
| Type | Open center |
| Pump rated output | 68.8L/min / 18.2gpm |
| Available flow at a single rear SCV | 43.4L/min / 11.5gpm |
| Number of rear selective control valves (SCVs) | Standard: Two Optional: Three |
| Number of mid selective control valves (SCVs) | Standard: Zero Optional: Up to Two |
| Joystick SCV control | Mechanical |
REAR HITCH
| Hitch draft control load sense type | Electrohydraulic |
| Remote control valves available | Standard: Two |
| Hitch category (SAE designation) | Category 2N; convertible to 2 & 1 |
| Maximum lift capacity behind lift points | 1390kg / 3604lb |
| Sensing type | Top link |
DRAWBAR
| Maximum vertical load | field use (short position): 1120kg / 2470lb Field use (fully extended): 760kg / 1675lb |
REAR POWER TAKE-OFF (PTO)
| Type | Standard: 540/540E |
| Engine rpm (at rated PTO speeds) | 540 at 2100 rpm / 540E at 1588 rpm |
| PTO actuation | Electrohydraulic |
REAR AXLE
| Type | Flange |
| Final drive type | Planetary |
| Differential controls | Mechanical (pedal) |
| Brakes, type and control | Hydraulic wet disc |
FRONT AXLE
| Type | Mechanical Front Wheel Drive (MFWD) |
TIRES
The John Deere 5075EN features 14.9-24 inch rear tires, providing good traction and stability on various terrains, particularly in agricultural applications. Its compact turning radius of 3.2m with brakes enhances maneuverability in tight spaces, making it ideal for tasks like cultivating and tilling in smaller fields. However, turning radius increases to 4.65m without brakes, which may limit agility in certain scenarios, especially in uneven or confined areas where precision is crucial.
| Rear | 14.9-24 In. 8PR R1 Bias |
| Turning radius with brakes | 3.2m / 10.5ft |
| Turning radius without brakes | 4.65m / 15.3ft |
ELECTRICAL SYSTEM
| Alternator size | OOS: 70 ampCab: 110 amp |
| Battery options | 12 V |
| Working lights | Standard: Halogen Optional: LED |
| Type of bulb in headlight (Halogen, Zenon, LED) | Standard: Halogen Optional: LED |
| Type of bulb in beacon (Halogen, Zenon, LED) | Kit: LED |
OPERATOR STATION
| Rollover protective structure, OOS | Rigid - foldable - telescopic Foldable, two-post Platform - flat/straddle Straddle Gearshift location - console/floor Floor, on the side |
| Seat | Standard: Mechanical Optional for Cab: Air Ride |
| Instructional seat | Not Available |
| Display | Simple automotive-style instrument cluster |
| Radio | Optional |
| dB(A) rating | 82 dBA |
DIMENSIONS
| Wheelbase | 1950mm / 76.77in |
| Overall length | 3639mm / 143.3 in |
| Approximate shipping weight, Open;Cab | OOS: 2735kg / 6029lb Cab: 3090kg / 6812lb |
CAPACITIES
| Fuel tank | 66L / 17.43gal.U.S. |
| Diesel exhaust fluid (DEF) tank | Not Applicable |
PRECISION AG
| Guidance | Optional: AutoTrac Universal Ready |
| Telematic | JDLink Modem |
MISCELLANEOUS
| AutoTrac ready | Optional for cab models |
| ISOBUS ready | No |
| Country of manufacture | Saltillo, Mexico |
ADDITIONAL INFORMATION
| Date collected | 6-Jan-2023 |