| Manufacturer |
John Deere |
| Price |
25,100(USD) |
| Model |
4600 |
| Equipment Type |
Compact Utility Tractors |
| Factory |
Augusta, Georgia, USA |
JOHN DEERE 4600 POWER
| Engine (gross) |
43hp / 32.1kW |
| Engine (net) |
41hp / 30.6kW |
| PTO (claimed) |
36hp / 26.8kW (gear) 34.5hp / 25.7kW (hydro) |
ENGINE DETAIL
The John Deere 4600 tractor, powered by a Yanmar 4-cylinder diesel engine, offers a compact yet robust 43hp output at a rated RPM of 2600, with a solid torque rating of 98 lb-ft at 1700 RPM, making it suitable for medium-duty tasks. Its direct injection and high compression ratio of 18:1 enhance fuel efficiency and performance, but the 121 ci displacement limits some heavy-duty applications. The dry air cleaner and pre-heating air heater are advantageous for operating in varying environmental conditions, reducing the risk of engine strain and allowing for reliable cold starts.
| Description |
Yanmar 4TNE84 diesel 4-cylinder liquid-cooled |
| Displacement |
121ci / 2.0L |
| Bore/Stroke |
3.307x3.543inches / 84x 90mm |
| Power (gross) |
43hp / 32.1kW |
| Fuel system |
direct injection |
| Air cleaner |
dry |
| Pre-heating |
air heater |
| Compression |
18:1 |
| Rated RPM |
2600 |
| Torque |
98lb-ft / 132.9Nm |
| Torque RPM |
1700 |
| Starter volts |
12 |
| Starter power |
2.7hp / 2.0kW |
| Coolant capacity |
7.6qts / 7.2L |
ENGINE OIL
The John Deere 4600 tractor has an oil capacity of 5.1 quarts (4.8 liters), which is suitable for maintaining optimal engine performance and longevity. This relatively small oil capacity necessitates regular oil changes and monitoring for consistent lubrication, especially in demanding operating conditions. Ensuring the correct oil level is vital to prevent engine wear and overheating, so routine maintenance checks are recommended.
| Oil capacity |
5.1qts / 4.8L |
JOHN DEERE 4600 ENGINE
The John Deere 4600 features a Yanmar 2.0L 4-cylinder diesel engine, which is known for its fuel efficiency and durability, making it ideal for small to medium agricultural tasks. However, the compact engine may limit power output for larger applications, so it’s best used in scenarios like small farm operations or landscaping. Additionally, maintain proper service intervals to ensure optimal engine performance and longevity.
| Description |
Yanmar 2.0L 4-cyl diesel |
TRANSMISSIONS OVERVIEW
The John Deere 4600 tractor features a 9-speed unsynchronized gear transmission alongside a 12-speed partially synchronized hydrostatic power shuttle, providing flexibility in speed control for varied tasks. The 24-speed partially synchronized power shuttle enhances maneuverability, particularly in applications requiring frequent direction changes, such as loader work. A potential drawback is the complexity of maintenance for the unsynchronized gears, which may impact operational efficiency if not regularly serviced.
| Description |
9-speed unsynchronized gear hydrostatic 12-speed partially synhcronized power shuttle 24-speed partially synhcronized power shuttle |
TRANSMISSION 1
The John Deere 4600 tractor features an unsynchronized collar shift transmission, offering 9 forward and 3 reverse gears across three ranges (A-C), which allows for versatile speed adjustments. The requirement to stop the tractor and engage the dry clutch for shifting can be a con for efficiency, especially in time-sensitive applications. However, the robust design with a total oil capacity of 27.2 quarts (25.7L) supports the transmission's durability, making it suitable for intensive agricultural tasks.
| Transmission |
Collar Shift |
| Type |
unsynchronized gear |
| Gears |
9 forward and 3 reverse |
| Clutch |
dry |
| Oil capacity |
27.2qts / 25.7L |
| Description |
Three speeds (1-3), plus reverse, in three ranges (A-C). Tractor must be stopped, and clutch used, to shift speeds or ranges |
SPEEDS 1
| Description |
With 13.6-28 rear tries |
TRANSMISSION 2
The John Deere 4600 tractor features an infinite hydrostatic transmission, allowing for seamless speed adjustments through a three-range system for enhanced maneuverability, which is advantageous for precise tasks like mowing or tilling. The 35.2-quart oil capacity ensures efficient lubrication and cooling, though periodic maintenance is crucial to prevent overheating during extended use. However, the requirement to stop the tractor to shift ranges may limit productivity in tasks requiring frequent speed changes.
| Type |
hydrostatic |
| Gears |
infinite (three-range) forward and reverse |
| Oil capacity |
35.2qts / 33.3L |
| Description |
Hydrostatic transmission operated with two foot pedals. Push-button cruise control on dash. Tractor must be stopped to shift ranges |
SPEEDS 2
| Description |
With 13.6-28 rear tries |
TRANSMISSION 3
The John Deere 4600 tractor features a partially synchronized power shuttle transmission, allowing seamless direction changes via the left-hand reverser without engaging the clutch, enhancing operational efficiency. With 12 forward and reverse gears, the tractor provides adaptable speed control; however, shifting ranges A-C requires a complete stop, which may interrupt workflow. The wet disc clutch design, utilizing two packs of three 5-inch discs each, offers durability and smooth engagement, but the 27.2-quart oil capacity necessitates regular maintenance to ensure optimal performance.
| Transmission |
Power Reverser |
| Type |
partially synhcronized power shuttle |
| Gears |
12 forward and reverse |
| Clutch |
wet disc, two clutch packs with three 5-inch discs each |
| Oil capacity |
27.2qts / 25.7L |
| Description |
Four speeds (1-4) in three ranges (A-C) with left-hand reverser on dash. Power shuttle allows direction changes without using the clutch. Speeds are synchronized and may be shifting on the move, using the clutch. Tractor must be stopped to shift ranges |
SPEEDS 3
| Description |
With 13.6-28 rear tries |
TRANSMISSION 4
The John Deere 4600 tractor features a partially synchronized power shuttle transmission with 24 forward and reverse gears, providing flexibility for various agricultural tasks. The addition of a creeper range allows for low-speed handling, ideal for applications requiring precision, such as cultivating or planting, but necessitates stopping and using the wet disc clutch to shift, which can be a workflow consideration. With an oil capacity of 27.2 quarts, maintenance intervals should be monitored to ensure optimal performance of the hydraulic system, which is crucial for smooth operation and longevity.
| Transmission |
Power Reverser Creeper |
| Type |
partially synhcronized power shuttle |
| Gears |
24 forward and reverse |
| Clutch |
wet disc, two clutch packs with three 5-inch discs each |
| Oil capacity |
27.2qts / 25.7L |
| Description |
Add creeper range to the Power Reverser, engaged by separate lever. Tractor must be stopped, and clutch used, to shift in or out of creeper range |
SPEEDS 4
| Description |
With 13.6-28 rear tries |
MECHANICAL
The John Deere 4600 offers a versatile drivetrain with options for 2WD or 4WD, advantageous for various terrains, though 4WD provides superior traction for challenging conditions. Its mechanical differential lock enhances performance in slippery situations, while the power steering improves maneuverability during operation. The transmission options, including 12-speed and 24-speed partially synchronized power shuttles, allow for precise control across speed ranges, making it suitable for diverse agricultural tasks but may require more operator skill to manage effectively.
| Chassis |
4x2 2WD/4x4 MFWD 4WD |
| Differential lock |
mechanical |
| Steering |
power |
| Brakes |
wet disc |
| Transmissions |
9-speed unsynchronized gear hydrostatic 12-speed partially synhcronized power shuttle 24-speed partially synhcronized power shuttle |
CAPACITY
| Fuel |
12.5gal / 47.3L |
| Hydraulic system |
6.8gal / 25.7L (gear) 8.8gal / 33.3L (hydro) |
| Front axle |
8.4qts / 7.9L |
HYDRAULICS
| Type |
open center |
| Capacity |
6.8gal / 25.7L (gear) 8.8gal / 33.3L (hydro) |
| Pressure |
2500psi / 172.4bar |
| Valves |
3 optional |
| Pump flow |
9.9gpm / 37.5lpm |
| Total flow |
14.7gpm / 55.6lpm |
| Steering flow |
4.8gpm / 18.2lpm |
TRACTOR HITCH
| Rear Type |
I |
| Rear lift (at 24 |
2,500lbs / 1134kg |
POWER TAKE-OFF (PTO)
| Rear PTO |
independent |
| Rear RPM |
540 |
| Mid PTO |
independent |
| Mid RPM |
2100 |
DIMENSIONS
JOHN DEERE 4600 WEIGHT
|
3,450lbs / 1564kg |
| Max Drawbar |
570lbs / 258kg |
| Max front axle |
992lbs / 449kg |
| Max rear axle |
1,984lbs / 899kg |
JOHN DEERE 4600 HEIGHT
| Hood |
49.2inches / 124cm (2WD) 51inches / 129cm (4WD) |
| ROPS |
88.4inches / 224cm (2WD fixed) 91.6inches / 232cm (4WD fixed) 94.4inches / 239cm (2WD folding) 97.6inches / 247cm (4WD folding) |
DIMENSIONS & TIRES
The John Deere 4600 tractor, weighing 3,450 lbs (1,564 kg), offers a balance of power and maneuverability, ideal for small to medium-sized farms. Its weight distribution enhances stability during operation, especially on uneven terrain, but may limit performance in extremely soft soils where sinking may occur. When considering a payload scenario, ensure compatibility with implements to optimize lifting capacity without exceeding the tractor’s limit.
ATTACHMENT OVERVIEW
72
| Type |
mid-mount John Deere 3-blade |
| Cutting width |
72inches / 182cm |
| Overall width |
85inches / 215cm |
BLADE
| Type |
front-mount John Deere |
| Width |
84inches / 213cm |
| Angle |
30° |
| Weight |
725lbs / 328kg |
| Lift type |
hydraulic |
| Angle type |
hydraulic |
JOHN DEERE 460 LOADER
| Height (to pin) |
111.9inches / 284cm |
| Clearance, dumped bucket |
88.8inches / 225cm |
| Dump reach |
26.9inches / 68cm |
| Dump angle |
45° |
| Reach at ground |
61.8inches / 156cm |
| Rollback angle |
30° |
| Breakout force (at 800mm) |
3,863lbs / 1752kg |
| Lift to full height (at 800mm) |
2,325lbs / 1054kg |
| Raise time to height |
4.8 s |
| Bucket dump time |
2.2 s |
| Lowering time |
3.3 s |
| Rollback time |
2.5 s |
JOHN DEERE 48 BACKHOE
| Backhoe type |
John Deere 48 Backhoe |
| Weight |
1517lbs / 688kg |
| Transport height |
81inches / 205cm |
| Bucket width |
12inches / 30cm 18inches / 45cm 24inches / 60cm 36inches / 91cm |
| Digging depth |
102inches / 259cm |
| Reach from pivot |
133inches / 337cm |
| Loading height |
82inches / 208cm |
| Bucket Rotation |
180 |
| Swing Arc |
180 |
| Bucket force |
3730lbs / 1691kg |
| Dipperstick force |
2435lbs / 1104kg |
4600 SERIAL NUMBERS
| Location |
Serial number plate on front-right tractor frame, above front wheel |
| 1998 |
160000 |
| 1999 |
260001 |
| 2000 |
360001 |
| 2001 |
460001 |
ELECTRICAL
| Ground |
negative |
| Charging system |
alternator |
| Charging amps |
40 |
| Battery CCA |
650 |
| Battery volts |
12 |
