| Manufacturer |
John Deere |
| Price |
- |
| Model |
4410 |
| Equipment Type |
Compact Utility Tractors |
| Factory |
Augusta, Georgia, USA |
JOHN DEERE 4410 POWER
| Engine (gross) |
34.6hp / 25.8kW |
| PTO (claimed) |
30hp / 22.4kW (gear) 28.5hp / 21.3kW (hydro) |
ENGINE DETAIL
The John Deere 4410, powered by a Yanmar 3-cylinder diesel engine, delivers a gross output of 34.6 hp with a high compression ratio of 18.5:1, which can enhance fuel efficiency and reduce exhaust emissions. The dry air cleaner and moderate coolant and oil capacities (6 quarts and 4.5 quarts respectively) indicate a maintenance-friendly design suited for small to medium agricultural applications. Challenges may arise from its rated RPM at 2600, requiring careful load management to prevent excessive stress on the engine during prolonged operations.
| Description |
Yanmar 3TNE88 diesel 3-cylinder liquid-cooled |
| Displacement |
81.2ci / 1.3L |
| Bore/Stroke |
3.23x3.31inches / 82x 84mm |
| Power (gross) |
34.6hp / 25.8kW |
| Air cleaner |
dry |
| Compression |
18.5:1 |
| Rated RPM |
2600 |
| Idle RPM |
1000-2810 |
| Starter volts |
12 |
| Starter power |
1.9hp / 1.4kW |
| Oil capacity |
4.5qts / 4.3L |
| Coolant capacity |
6 qts /5.7 L |
JOHN DEERE 4410 ENGINE
The John Deere 4410 is equipped with a Yanmar 1.3L 3-cylinder diesel engine, known for its fuel efficiency and robust torque delivery, making it suitable for various agricultural tasks. However, its smaller displacement may limit power output for heavier implement usage, which could challenge performance in demanding conditions. This tractor excels in compact applications, ideal for small to medium-sized farms or residential landscaping, where maneuverability and low operating costs are paramount.
| Description |
Yanmar 1.3L 3-cyl diesel |
TRANSMISSIONS OVERVIEW
The John Deere 4410 features a 12-speed power shuttle hydrostatic transmission, which provides seamless direction changes and precise speed control, enhancing maneuverability in tight spaces. This system allows operators to shift between forward and reverse without clutching, improving efficiency during tasks such as loader work. However, users should consider potential maintenance implications associated with hydrostatic systems and ensure regular hydraulic fluid checks to maintain optimal performance.
| Description |
12-speed power shuttle hydrostatic |
TRANSMISSION 1
The John Deere 4410's ePowrReverser transmission facilitates smooth forward and reverse transitions, allowing for quick direction changes without clutch engagement, enhancing operational efficiency in tasks like loader work. The synchronized gear system (12 forward and reverse) allows for versatile speed management, though range shifts necessitate a complete stop, which may affect workflow in dynamic environments. An appropriate oil capacity of 25.2 quarts ensures optimal lubrication and cooling, crucial for prolonged heavy-duty operations.
| Transmission |
ePowrReverser |
| Type |
power shuttle |
| Gears |
12 forward and reverse |
| Oil capacity |
25.2qts / 23.8L |
| Description |
Four gears (1-4) in three ranges (A-C) with reverser lever. Gears are synchronized and may be shifted on the move using the clutch. Tractor must be stopped to shift ranges. Forward/reverse direction changes may be done on the move, without the clutch, by using the reverser lever |
SPEEDS 1
| Description |
With 11.2-24 rear tires |
TRANSMISSION 2
The John Deere 4410's eHydro transmission provides infinite gears within a three-range system, enhancing versatility in various field conditions. Key features like LoadMatch prevent stalling under heavy loads, while SpeedMatch allows precise speed control, offering advantages in both sensitive tasks and heavy-duty applications. However, the requirement to stop for range shifts may be a drawback in high-speed operations, necessitating careful operation to maximize efficiency.
| Transmission |
eHydro |
| Type |
hydrostatic |
| Gears |
infinite (3-range) forward and reverse |
| Oil capacity |
27.2qts / 25.7L |
| Description |
Three-range hydrostatic transmission with foot pedals and cruise control. Tractor must be stopped to shift ranges. Automotive cruise control option allows set speed to be adjusted with rocker switch. SpeedMatch option allows a maximum speed to be set and full pedal travel used to achive that speed. LoadMatch option prevents the tractor from stalling during heavy loads. The MotionMatch option enables the acceleration rate to be set to fast or slow |
SPEEDS 2
| Description |
With 11.2-24 rear tires |
MECHANICAL
The John Deere 4410 tractor features a 4x4 MFWD system, enhancing traction and stability in varied terrains, making it ideal for agricultural applications. Its mechanical differential lock improves traction during challenging conditions but may require manual engagement. The power steering and wet disc brakes provide superior maneuverability and stopping power, further benefiting operators in precision tasks, while the optional foldable ROPS adds flexibility for transport and storage.
| Chassis |
4x4 MFWD 4WD |
| Differential lock |
mechanical |
| Steering |
power |
| Brakes |
wet disc |
| Cab |
Two-post ROPS. Foldable ROPS optional |
| Transmissions |
12-speed power shuttle hydrostatic |
CAPACITY
| Fuel |
10gal / 37.9L |
| Hydraulic system |
6.3gal / 23.8L (gear) 6.8gal / 25.7L (hydro) |
| Front axle |
4.7qts / 4.4L |
HYDRAULICS
| Type |
open center |
| Capacity |
6.3gal / 23.8L (gear) 6.8gal / 25.7L (hydro) |
| Pressure |
2500psi / 172.4bar |
| Valves |
5 |
| Pump flow |
8.6gpm / 32.6lpm |
| Total flow |
13.9gpm / 52.6lpm |
| Steering flow |
5.3gpm / 20.1lpm |
TRACTOR HITCH
| Rear Type |
I |
| Rear lift (at 24 |
2,200lbs / 997kg |
POWER TAKE-OFF (PTO)
| Rear PTO |
independent |
| Rear RPM |
540 |
| Mid PTO |
optional |
| Mid RPM |
2100 |
JOHN DEERE 4410 TIRES
The John Deere 4410 features an agricultural tire configuration with 7.00-14 front tires and 11.2-24 rear tires, optimizing traction and stability for fieldwork and transport. The front tire size provides adequate steering response and maneuverability, while the larger rear tires enhance load capacity and mitigate soil compaction. However, the limited size range may challenge performance in heavy-duty applications, necessitating careful consideration of operational load requirements.
| Ag front |
7.00-14 |
| Ag rear |
11.2-24 |
DIMENSIONS
| Wheelbase |
68inches / 172cm |
| Length |
117inches / 297cm |
| Width |
50inches / 127cm |
| Ground clearance |
13.4inches / 34cm |
JOHN DEERE 4410 WEIGHT
|
2,900lbs / 1315kg |
| Max Drawbar |
562lbs / 254kg |
| Max front axle |
1,588lbs / 720kg |
| Max rear axle |
4,410lbs / 2000kg |
JOHN DEERE 4410 HEIGHT
| Hood |
53.3inches / 135cm |
| ROPS |
82.4inches / 209cm (fixed) 90inches / 228cm (folding) |
DIMENSIONS & TIRES
The John Deere 4410, with a wheelbase of 68 inches (172 cm) and a weight of 2,900 lbs (1,315 kg), offers stability for various agricultural tasks, ideal for light to medium-duty operations. The 7.00-14 front tires provide agility, while the 11.2-24 rear tires enhance traction, beneficial for plowing and towing applications. However, its relatively lower weight may challenge stability on very uneven terrain, necessitating careful operation.
| Wheelbase |
68inches / 172cm |
| Weight |
2,900lbs / 1315kg |
| Front tire |
7.00-14 |
| Rear tire |
11.2-24 |
ATTACHMENT OVERVIEW
60
| Type |
mid-mount John Deere 60 7-Iron |
| Cutting width |
60inches / 152cm |
72
| Type |
mid-mount John Deere 3-blade |
| Cutting width |
72inches / 182cm |
JOHN DEERE 430 LOADER
| Height (to pin) |
101.4inches / 257cm |
| Clearance, dumped bucket |
78.3inches / 198cm |
| Dump reach |
26inches / 66cm |
| Dump angle |
45° |
| Reach at ground |
57.5inches / 146cm |
| Rollback angle |
30° |
| Breakout force (at pin) |
3299lbs / 1496kg |
| Breakout force (at 500mm) |
2417lbs / 1096kg |
| Lift to full height (at pin) |
1261lbs / 571kg |
| Lift to full height (at 500mm) |
1045lbs / 474kg |
| Raise time to height |
3.5 s |
| Bucket dump time |
1.8 s |
| Lowering time |
2.5 s |
| Rollback time |
2.3 s |
JOHN DEERE 48 BACKHOE
| Backhoe type |
John Deere 48 Backhoe |
| Weight |
1517lbs / 688kg |
| Transport height |
81inches / 205cm |
| 2-Foot flat digging depth |
102inches / 259cm |
| Reach from pivot |
133inches / 337cm |
| Loading height |
82inches / 208cm |
| Bucket Rotation |
180 |
| Swing Arc |
180 |
| Bucket force |
3730lbs / 1691kg |
| Dipperstick force |
2435lbs / 1104kg |
4410 SERIAL NUMBERS
| Location |
On right side of tractor frame above the front axle |
| 2002 |
140001 |
| 2003 |
240001 |
| 2004 |
340001 |
ELECTRICAL
| Ground |
negative |
| Charging system |
alternator |
| Charging amps |
40/55 (optional) |
| Battery CCA |
500 |
| Battery volts |
12 |
