| Manufacturer |
John Deere |
| Price |
- |
| Model |
4310 |
| Equipment Type |
Compact Utility Tractors |
| Factory |
Augusta, Georgia, USA |
JOHN DEERE 4310 POWER
| Engine (gross) |
31.2hp / 23.3kW |
| PTO (claimed) |
27hp / 20.1kW |
ENGINE DETAIL
The John Deere 4310 is powered by a Yanmar 3TNE84 diesel engine, offering 31.2 hp at a rated RPM of 2600, which is efficient for compact utility applications. Its 18.5:1 compression ratio indicates good thermal efficiency, while the dry air cleaner helps in maintaining optimal engine performance in dusty conditions. With an oil capacity of 4.5 quarts and a coolant capacity of 6 quarts, routine maintenance is manageable, making it well-suited for small farms or landscaping tasks where reliability is paramount.
| Description |
Yanmar 3TNE84 diesel 3-cylinder liquid-cooled |
| Displacement |
92ci / 1.5L |
| Power (gross) |
31.2hp / 23.3kW |
| Air cleaner |
dry |
| Compression |
18.5:1 |
| Rated RPM |
2600 |
| Idle RPM |
1000-2810 |
| Starter volts |
12 |
| Starter power |
1.9hp / 1.4kW |
| Oil capacity |
4.5qts / 4.3L |
| Coolant capacity |
6 qts /5.7 L |
JOHN DEERE 4310 ENGINE
The John Deere 4310 is powered by a Yanmar 1.5L 3-cylinder diesel engine, providing efficient fuel consumption with optimal torque for various farming tasks, enhancing productivity in small to moderate-sized operations. However, its relatively low horsepower may limit its suitability for heavy-duty applications, making it ideal for light to medium-duty tasks such as landscaping and hobby farming. Consideration should be given to the operational environment, as the tractor's maneuverability in tight spaces may offset its lower power output.
| Description |
Yanmar 1.5L 3-cyl diesel |
TRANSMISSIONS OVERVIEW
The John Deere 4310 features a 9-speed partially synchronized hydrostatic transmission complemented by a 12-speed power shuttle, promoting efficient power management and seamless direction change. This dual transmission system enhances operator control and reduces fatigue, making it ideal for varied farming applications. However, the complexity of the transmission may require regular maintenance and could lead to higher repair costs if not properly managed.
| Description |
9-speed partially synchronized hydrostatic 12-speed power shuttle |
TRANSMISSION 1
The John Deere 4310 features a partially synchronized SyncShift transmission which allows for smooth gear transitions within three ranges (A-C), making it suitable for various field
| Transmission |
SyncShift |
| Type |
partially synchronized |
| Gears |
9 forward and 3 reverse |
| Oil capacity |
25.2qts / 23.8L |
| Description |
Three gears (1-3) plus reverse in three ranges (A-C). Gears can be shifted on the move using the clutch. Tractor must be stopped to shift ranges |
SPEEDS 1
| Description |
With 11.2-24 rear tires |
TRANSMISSION 2
The John Deere 4310 features an eHydro hydrostatic transmission with infinite gear options across three ranges, providing smooth operation and ease of use, particularly in varied terrain. The LoadMatch, SpeedMatch, and MotionMatch options enhance performance by optimizing speed management and preventing stalling under heavy loads, making it advantageous for tasks requiring consistent power, like mowing or loader work. However, the requirement to stop the tractor to shift ranges can be a limitation in dynamic work scenarios, such as when navigating uneven fields quickly.
| Transmission |
eHydro |
| Type |
hydrostatic |
| Gears |
infinite (3-range) forward and reverse |
| Oil capacity |
27.2qts / 25.7L |
| Description |
Three-range hydrostatic transmission with foot pedals and cruise control. Tractor must be stopped to shift ranges. Automotive cruise control option allows set speed to be adjusted with rocker switch. SpeedMatch option allows a maximum speed to be set and full pedal travel used to achive that speed. LoadMatch option prevents the tractor from stalling during heavy loads. The MotionMatch option enables the acceleration rate to be set to fast or slow |
SPEEDS 2
| Description |
With 11.2-24 rear tires |
TRANSMISSION 3
The John Deere 4310's ePowrReverser transmission allows for seamless direction changes on the move, enhancing operational efficiency, particularly in tight spaces. With 12 total gears (four in three synchronized ranges), operators can easily adapt to varying field conditions, although shifting ranges requires a complete stop, which could be a drawback in fast-paced environments. The 25.2 qt oil capacity ensures adequate lubrication, essential for maintaining peak performance and longevity under heavy loads.
| Transmission |
ePowrReverser |
| Type |
power shuttle |
| Gears |
12 forward and reverse |
| Oil capacity |
25.2qts / 23.8L |
| Description |
Four gears (1-4) in three ranges (A-C) with reverser lever. Gears are synchronized and may be shifted on the move using the clutch. Tractor must be stopped to shift ranges. Forward/reverse direction changes may be done on the move, without the clutch, by using the reverser lever |
SPEEDS 3
| Description |
With 11.2-24 rear tires |
MECHANICAL
The John Deere 4310 tractor offers versatility with both 2WD and 4WD options, enhancing traction in diverse terrain, particularly advantageous for variable field conditions. Its mechanical differential lock ensures better power transfer during challenging operations, but users should be aware that it requires manual engagement. The hydrostatic and power shuttle transmissions provide smooth operation, allowing for precise speed control, making it suitable for various agricultural tasks but may require additional operator training for optimal use.
| Chassis |
4x2 2WD/4x4 MFWD 4WD |
| Differential lock |
mechanical |
| Steering |
power |
| Brakes |
wet disc |
| Cab |
Two-post ROPS. Foldable ROPS optional |
| Transmissions |
9-speed partially synchronized hydrostatic 12-speed power shuttle |
CAPACITY
| Fuel |
10gal / 37.9L |
| Hydraulic system |
6.3gal / 23.8L (gear) 6.8gal / 25.7L (hydro) |
| Front axle |
4.7qts / 4.4L |
HYDRAULICS
| Type |
open center |
| Capacity |
6.3gal / 23.8L (gear) 6.8gal / 25.7L (hydro) |
| Pressure |
2500psi / 172.4bar |
| Valves |
5 |
| Pump flow |
8.6gpm / 32.6lpm |
| Total flow |
13.9gpm / 52.6lpm |
| Steering flow |
5.3gpm / 20.1lpm |
TRACTOR HITCH
| Rear Type |
I |
| Rear lift (at 24 |
2,200lbs / 997kg |
POWER TAKE-OFF (PTO)
| Rear PTO |
independent |
| Rear RPM |
540 |
| Mid PTO |
optional |
| Mid RPM |
2100 |
JOHN DEERE 4310 TIRES
The John Deere 4310 features a tire configuration of 5.00-15 for 2WD and 7.00-14 for 4WD on the front, paired with 11.2-24 on the rear, optimizing traction and stability. The 4WD option enhances maneuverability in challenging terrains, making it suitable for heavy-duty agricultural tasks. However, the narrower front tires on the 2WD version may limit flotation on soft ground, presenting a disadvantage in wet conditions.
| Ag front |
5.00-15 (2WD) / 7.00-14 (4WD) |
| Ag rear |
11.2-24 |
DIMENSIONS
| Wheelbase |
68inches / 172cm |
| Length |
117inches / 297cm |
| Width |
50inches / 127cm |
| Ground clearance |
13.4inches / 34cm |
JOHN DEERE 4310 WEIGHT
|
2,600lbs / 1179kg (2WD) 2,900lbs / 1315kg (4WD) |
| Max Drawbar |
562lbs / 254kg |
| Max front axle |
1,588lbs / 720kg |
| Max rear axle |
4,410lbs / 2000kg |
JOHN DEERE 4310 HEIGHT
| Hood |
53.3inches / 135cm |
| ROPS |
82.4inches / 209cm (fixed) 90inches / 228cm (folding) |
DIMENSIONS & TIRES
The John Deere 4310 has a compact wheelbase of 68 inches, enhancing maneuverability in tight spaces, making it ideal for landscaping and small farming operations. At a weight range of 2,600 to 2,900 pounds, it strikes a balance between stability and transportability, but may limit heavy-duty towing capabilities. The tire specifications (5.00-15 front and 11.2-24 rear) suggest a good traction profile for medium-duty tasks, though users may consider upgrading tires for enhanced performance in varied terrain.
| Wheelbase |
68inches / 172cm |
| Weight |
2600 to 2900 pounds |
| Front tire |
5.00-15 |
| Rear tire |
11.2-24 |
ATTACHMENT OVERVIEW
60
| Type |
mid-mount John Deere 60 7-Iron |
| Cutting width |
60inches / 152cm |
72
| Type |
mid-mount John Deere 3-blade |
| Cutting width |
72inches / 182cm |
JOHN DEERE 420 LOADER
| Height (to pin) |
87.6inches / 222cm |
| Clearance, dumped bucket |
66.1inches / 167cm |
| Dump reach |
30.3inches / 76cm |
| Dump angle |
43° |
| Reach at ground |
53.6inches / 136cm |
| Rollback angle |
23° |
| Breakout force (at pin) |
2693lbs / 1221kg |
| Lift to full height (at pin) |
1195lbs / 542kg |
| Lift to full height (at 500mm) |
895lbs / 405kg |
| Raise time to height |
2.9 s |
| Bucket dump time |
1.6 s |
| Lowering time |
2.4 s |
| Rollback time |
2.2 s |
JOHN DEERE 430 LOADER
| Height (to pin) |
101.4inches / 257cm |
| Clearance, dumped bucket |
78.3inches / 198cm |
| Dump reach |
26inches / 66cm |
| Dump angle |
45° |
| Reach at ground |
57.5inches / 146cm |
| Rollback angle |
30° |
| Breakout force (at pin) |
3299lbs / 1496kg |
| Breakout force (at 500mm) |
2417lbs / 1096kg |
| Lift to full height (at pin) |
1261lbs / 571kg |
| Lift to full height (at 500mm) |
1045lbs / 474kg |
| Raise time to height |
3.5 s |
| Bucket dump time |
1.8 s |
| Lowering time |
2.5 s |
| Rollback time |
2.3 s |
JOHN DEERE 48 BACKHOE
| Backhoe type |
John Deere 48 Backhoe |
| Weight |
1517lbs / 688kg |
| Transport height |
81inches / 205cm |
| 2-Foot flat digging depth |
102inches / 259cm |
| Reach from pivot |
133inches / 337cm |
| Loading height |
82inches / 208cm |
| Bucket Rotation |
180 |
| Swing Arc |
180 |
| Bucket force |
3730lbs / 1691kg |
| Dipperstick force |
2435lbs / 1104kg |
4310 SERIAL NUMBERS
| Location |
On right side of tractor frame above the front axle |
| 2002 |
130001 |
| 2003 |
230001 |
| 2004 |
330001 |
ELECTRICAL
| Ground |
negative |
| Charging system |
alternator |
| Charging amps |
40/55 (optional) |
| Battery CCA |
500 |
| Battery volts |
12 |
