| Manufacturer |
John Deere |
| Price |
12,062(USD) |
| Model |
1023E |
| Equipment Type |
Compact Tractors |
| Factory |
Augusta, Georgia, USA |
KEY SPECS
| Engine power (gross) |
SAE J1995 rated power: 16 kW21.5 hp21.8 PS |
| Power take-off (PTO) power |
11.1 kW14.9 hp |
| Steering hydraulics |
13.2 L/min3.5 gpm |
| Implement hydraulics |
13.2 L/min3.5 gpm |
| Hitch type |
Limited Category 1 |
| Lift capacity, 24-in. behind link arms |
344 kg758 lb |
| Standard transmission; forward/reverse |
Hydrostatic - two range |
| Cruise control |
No |
| Approximate shipping weight (open-station; ca |
Open station: 656 kg1446 lbCab: Not applicable |
| Wheelbase |
1450 mm57.1 in. |
ENGINE
The John Deere 1023E, powered by a Yanmar 3TNM74F-NCJT engine, delivers a gross power of 21.5 hp with a noteworthy PTO power of 14.9 hp, making it suitable for light-duty applications and implements. The engine's three-cylinder configuration with a 23.5:1 compression ratio and indirect injection system ensures efficient fuel combustion while meeting Final Tier 4 emissions standards, which is advantageous for environmentally conscious operations. However, the limited 24 L fuel tank may necessitate frequent refueling during extensive tasks, particularly in agricultural or landscaping scenarios.
| Manufacturer |
Yanmar¨ |
| Engine model |
3TNM74F-NCJT |
| Engine power (gross) |
SAE J1995 rated power: 16 kW21.5 hp21.8 PS |
| Power take-off (PTO) power |
11.1 kW14.9 hp |
| Rated engine speed |
3200 rpm |
| Type |
Diesel |
| Injection pump type |
Indirect injection |
| Aspiration |
Natural |
| Emissions compliance |
Final Tier 4 |
| Cylinders/displacement |
Three cylinders: 0.993 L60.6 cu in. |
| Number of cylinders |
Three |
| Cylinder liners |
Cast-in-block |
| Bore and stroke |
74 x 77 mm2.91 x 3.03 in. |
| Compression ratio |
23.5:1 |
| Lubrication |
Pressurized |
| Cooling system |
Water pump |
| Air cleaner |
Dual element |
| Engine torque at rated speed |
47.7 Nm35.2 lb-ft |
| Fuel tank capacity |
24 L6.3 U.S. gal. |
ELECTRICAL
| Battery size |
500 CCA |
| Alternator (12-V) |
40 amp |
| Starter size |
1.2 kW1.6 hp |
FUEL SYSTEM
TRANSMISSION
The John Deere 1023E features a hydrostatic transmission, allowing for smooth speed adjustments and easier operation, especially in tight spaces. With a total axle capacity of 1,049 kg (2,314 lb) for front and rear combined, it provides a solid foundation for handling a variety of implements; however, the absence of a creeper gear may limit low-speed applications. The wet disc brakes and differential lock enhance traction and control, making it suitable for tasks like mowing or light tillage in varied terrain.
| Standard transmission; forward/reverse |
Hydrostatic - two range |
| Left-hand reverser |
No |
| Final drive |
Spur gear |
| Brakes |
Wet disc (left-hand pedal) |
| Steering |
Power |
| Axle capacity |
Front612 kg1349 lbRear715 kg1576 lb |
| Creeper |
No |
| Cruise control |
No |
| Differential lock |
Yes |
HYDRAULICS
| Type |
Open center |
| Pump rated output |
Steering13.2 L/min3.5 gpmImplement13.2 L/min3.5 gpm24 L/min6.3 gpm |
| Pump type |
Single gear |
| Maximum operating pressure |
138 bar2000 psi |
| Draft control sensing |
Select control |
| Remote control valves available |
Three |
3-POINT HITCH
| Type |
Limited Category 1 |
| Lift capacity, 24-in. behind link arms |
344 kg758 lb |
| Standard |
Rear: 540 rpmMid: 2100 rpm |
| Control |
Independent |
| Clutch |
Wet disk |
| Brake (for mid and rear PTO) |
Wet disk |
FLUID CAPACITIES
| Crankcase with filter |
2.7 L2.9 qt |
| Transmission and hydraulic system |
12.3 L3.2 gal. |
FINAL DRIVE
| Type |
Spur gear |
| Differential lock |
Yes |
OPERATOR STATION
| Rollover protective structure |
TypeFoldableYes |
| Platform - flat/straddle |
One-piece semi flat |
| Gear shift location - console/floor |
Left-hand side |
CAB
DIMENSIONS
| Wheelbase |
1450 mm57.1 in. |
| Front axle clearance |
195 mm7.7 in. |
| Turning radius without brakes |
Outside front tire: 2.51 m8.2 ft |
| Limited slip differential |
No |
| Approximate shipping weight (open-station; ca |
Open station: 656 kg1446 lbCab: Not applicable |
TIRES
The John Deere 1023E features R3 Turf tires, ideal for minimizing soil compaction while providing good traction on soft surfaces like lawns and gardens. The front tread range of 931 mm and rear spacing of 895 mm contribute to enhanced stability and maneuverability, making it well-suited for residential landscaping and maintenance tasks. However, its turf tires may limit performance on rough or uneven terrain, potentially necessitating tire swaps for more demanding agricultural applications.
| Front |
R3 Turf: 18x8.50-10R4: 18x8.5-10 |
| Rear |
R3 Turf: 26x12-12R4: 26x12-12 |
| Front tread range |
931 mm36.7 in. |
| Rear tread spacing |
895 mm35.2 in. |
MISCELLANEOUS
