| Manufacturer |
Farmall |
| Price |
2,100(USD) |
| Model |
Super H |
| Equipment Type |
Row-Crop Tractors |
| Factory |
|
NEBRASKA TRACTOR TEST 492 2
| Description |
Gasoline 5-speed 2WD April 27 - May 13, 1953 Link: Nebraska Tractor Test 492 file Drawbar performance Gear 3 used for power test Gear 1 used for pull test |
| Belt power (max) |
33.40hp / 24.9kW |
| Belt fuel use (max) |
3.0gal/hour / 11.4l/hour |
| Max power |
30.69hp / 22.9kW |
| Max pull |
4,178lbs / 1895kg |
FARMALL SUPER H POWER
| Drawbar (claimed) |
22hp / 16.4kW |
| PTO (claimed) |
29hp / 21.6kW |
| Drawbar (tested) |
30.69hp / 22.9kW |
| Belt (tested) |
33.40hp / 24.9kW |
ENGINE DETAIL
The Farmall Super H features an International Harvester C164 engine with a moderate displacement of 2.7L, providing adequate power for various farming tasks, while its 6.1:1 compression ratio contributes to efficiency but may limit performance at higher RPMs. Key maintenance parameters include a spark plug gap of 0.025 inches, which is important for ignition efficiency, and a coolant capacity of 16.5 quarts, necessary for effective engine cooling. Given its 1650 RPM rated speed, the Super H is ideal for low-to-medium load applications, balancing power and fuel efficiency, but may struggle under high-load scenarios compared to more modern tractors.
| Description |
International Harvester C164 gasoline 4-cylinder liquid-cooled |
| Displacement |
164ci / 2.7L |
| Bore/Stroke |
3.50x4.25inches / 89x 108mm |
| Compression |
6.1:1 |
| Rated RPM |
1650 |
| Firing order |
1-3-4-2 |
| Starter volts |
6 |
| Coolant capacity |
16.5qts / 15.6L |
| Sparkplug gap |
0.025inches / 0.635mm |
| Point gap |
0.020inches / 0.508mm |
| Intake valve clearance |
0.017inches / 0.432mm hot |
| Exhaust valve clearance |
0.017inches / 0.432mm hot |
FARMALL SUPER H ENGINE
The Farmall Super H is powered by a 2.7L 4-cylinder gasoline engine, offering reliable performance for small to medium-sized farming tasks. Its 17-gallon fuel capacity provides extended operation between refueling, enhancing efficiency during fieldwork. However, its focus on gasoline might limit its appeal compared to diesel alternatives, especially in terms of fuel economy and torque for heavier equipment.
| Description |
International Harvester 2.7L 4-cyl gasoline |
| Fuel tank |
17gal / 64.3L |
TRANSMISSION
The Farmall Super H features a sliding gear transmission with 5 forward speeds and 1 reverse, allowing for versatile operation in various field conditions. The dry disc clutch offers durability and ease of maintenance but may require more effort to operate compared to hydraulic systems. Ideal for small to medium-sized farms, this tractor effectively balances power and maneuverability for diverse agricultural tasks.
| Type |
sliding gear |
| Gears |
5 forward and 1 reverse |
| Clutch |
dry disc |
MECHANICAL
The Farmall Super H features a 4x2 2WD chassis, offering simplicity in operation but limiting traction in muddy or hilly terrains. Its manual steering requires more physical effort, which may lead to fatigue during prolonged use, while the mechanical disc brakes ensure straightforward maintenance but can be less responsive than modern hydraulic systems. With a 5-speed sliding gear transmission, it provides adequate speed control for various farming tasks, though shifting may be less smooth compared to modern synchronized transmissions.
| Chassis |
4x2 2WD |
| Steering |
manual |
| Brakes |
mechanical disc |
| Cab |
Open operator station |
| Transmission |
5-speed sliding gear |
POWER TAKE-OFF (PTO)
FARMALL SUPER H TIRES
The Farmall Super H features a tire configuration of 5.50-16 on the front and 11-38 on the rear, providing a balanced combination of traction and flotation for agricultural tasks. The larger rear tires enhance ground contact and stability, which is advantageous for heavier loads and plowing in varied terrain. However, the tractor's weight distribution may require careful management during operation to prevent slippage in soft soil conditions.
| Ag front |
5.50-16 |
| Ag rear |
11-38 |
DIMENSIONS
| Wheelbase |
89.25inches / 226cm |
| Length |
133inches / 337cm |
| Width |
75.5inches / 191cm 100inches / 254cm (long-axle) |
| Height |
85inches / 215cm |
| Weight |
3,875lbs / 1757kg |
| Ballasted weight |
6,701lbs / 3039kg |
| Front tread |
8.1inches / 20cm |
| Rear tread |
48 to 88inches / 121to 223cm |
DIMENSIONS & TIRES
The Farmall Super H features a 89.25-inch wheelbase, providing stability for fieldwork and maneuverability in tight spaces. Weighing 3,875 lbs, it is suitable for a variety of agricultural tasks, but operators should consider soil compaction effects from heavier models. The tire sizes, 5.50-16 front and 11-38 rear, indicate a design focused on optimal traction and flotation, advantageous for plowing and tilling operations on various terrains.
| Wheelbase |
89.25inches / 226cm |
| Weight |
3,875lbs / 1757kg |
| Front tire |
5.50-16 |
| Rear tire |
11-38 |
SUPER H SERIAL NUMBERS
| Location |
Left side of clutch housing |
| 1953 |
501 |
| 1954 |
22202 |
BELT PULLEY
| Diameter |
9.75inches / 24cm |
| Width |
7.5inches / 19cm |
| RPM |
1019 |
| Speed |
2,601ft/min / 792.78meters/min |
