| Manufacturer | Zetor |
| Price | - |
| Model | Primo HT20 |
| Equipment Type | Sub-Compact Utility Tractors |
| Factory |
ZETOR PRIMO HT20 POWER
| Engine (gross) | 19hp / 14.2kW |
ENGINE DETAIL
The Zetor Primo HT20 is equipped with a reliable Yanmar 3-cylinder diesel engine, compliant with Stage 5 emissions standards, making it suitable for environmentally sensitive operations. With a rated power of 19hp (14.2kW), it offers sufficient torque for light agricultural tasks, although users may find limitations in power for heavier implements. The electric starter enhances ease of use, particularly in cold starts, but the 12V electrical system may require attention if additional electrical attachments are considered.
| Description | Yanmar diesel 3-cylinder liquid-cooled |
| Emissions | Stage 5 |
| Rated Power (2000/25/CE) | 19hp / 14.2kW |
| Starter | electric |
| Starter volts | 12 |
ZETOR PRIMO HT20 ENGINE
The Zetor Primo HT20 is powered by a Yanmar 3-cylinder diesel engine, providing efficient fuel consumption suited for light agricultural tasks. With a 6.6-gallon (25.0L) fuel tank, it offers a balanced operating range, ideal for short to medium-duration field work without frequent refueling. However, its compact design might challenge stability under heavy loads, necessitating careful weight management and implement selection.
| Description | Yanmar 3-cyl diesel |
| Fuel tank | 6.6gal / 25.0L |
TRANSMISSION
The Zetor Primo HT20 features a hydrostatic transmission with infinite (2-range) forward and reverse gears, providing seamless speed control and enhancing maneuverability for various agricultural tasks. This setup allows for precise handling in tight spaces, but may require more maintenance compared to traditional gear systems. Ideal for small to medium-sized farms, it excels in tasks such as tilling, mowing, and transporting materials.
| Type | hydrostatic |
| Gears | infinite (2-range) forward and reverse |
MECHANICAL
The Zetor Primo HT20 features a 4x4 MFWD system, enhancing traction and stability across varied terrains, making it ideal for small farms or gardening tasks. Its hydrostatic transmission allows for seamless speed adjustments and ease of operation, particularly beneficial in precision work. However, the cab is limited to a two-post folding ROPS, which may reduce operator comfort and protection compared to fully enclosed cabs in adverse weather conditions.
| Chassis | 4x4 MFWD 4WD |
| Cab | Two-post folding ROPS. |
| Transmission | hydrostatic |
HYDRAULICS
| Pump flow | 7 gpm /26.5 lpm |
TRACTOR HITCH
| Rear Type | IN |
| Control | position control |
| Rear lift | 1100lbs / 498kg |
POWER TAKE-OFF (PTO)
| Rear PTO | independent |
| Clutch | electro-hydraulic |
| Rear RPM | 540 |
| Mid PTO | independent |
| Mid RPM | 2500 |
ZETOR PRIMO HT20 TIRES
The Zetor Primo HT20 features front turf tires (18x8.00-10) and rear turf tires (26x12.00-12), optimizing traction while minimizing soil compaction, suitable for lawn maintenance and soft terrain. The larger rear tires enhance stability and load distribution, while the front turf tires facilitate maneuverability in tight spaces. However, limited ground clearance may pose challenges on uneven terrain; thus, it excels in maintained lawns rather than rugged fields.
| Lawn/turf front | 18x8.00-10 |
| Lawn/turf rear | 26x12.00-12 |
DIMENSIONS
| Wheelbase | 53.2inches / 135cm |
| Length | 94.3inches / 239cm |
| Width | 44.5inches / 113cm |
| Height (ROPS) | 86.6inches / 219cm |
| Weight | 1671lbs / 757kg |
| Ground clearance | 8.3inches / 21cm |
DIMENSIONS & TIRES
The Zetor Primo HT20 features a compact wheelbase of 53.2 inches (135 cm), enhancing maneuverability in tight spaces, ideal for small-scale farming or landscaping tasks. Weighing 1671 lbs (757 kg), it offers a balance of stability and weight distribution, although this may limit its towing capacity compared to larger tractors. Consider its suitability for lighter applications, where agility outweighs the need for raw power.
| Wheelbase | 53.2inches / 135cm |
| Weight | 1671lbs / 757kg |
54
| Type | mid-mount Zetor |
| Cutting width | 54inches / 137cm |
ELECTRICAL
| Ground | negative |
| Battery volts | 12 |