| Manufacturer | Zetor |
| Price | 34,000(USD) |
| Model | 7341 |
| Equipment Type | Utility Tractors |
| Factory | Brno, Czech Republic |
NEBRASKA TRACTOR TEST 1684 2
| Description | Diesel 10-speed 2WD March 1997 - November 1997, Link: Nebraska Tractor Test 1684 file PTO performance Drawbar performance Gear 1R used for power test Gear 3T used for pull test |
| Power at rated engine speed | 72.8hp / 54.3kW |
| Fuel use | 4.0gal/hour / 15.1l/hour |
| Power at rated PTO speed | 72.4hp / 54.0kW |
| Max power | 55.0hp / 41.0kW |
| Max pull | 9890lbs / 4486kg |
ZETOR 7341 POWER
| Engine | 78hp / 58.2kW |
| PTO (claimed) | 73hp / 54.4kW |
| Drawbar (tested) | 55.0hp / 41.0kW |
| PTO (tested) | 72.8hp / 54.3kW |
ENGINE DETAIL
The Zetor 7341 features a turbocharged 4-cylinder diesel engine with a displacement of 3.9L, delivering 78hp at a rated RPM of 2200. The compression ratio of 17:1 provides improved efficiency, enhancing torque output, making it suitable for agricultural tasks requiring substantial pulling power. However, the relatively low power rating could limit its effectiveness for heavier-duty applications; thus, it is ideally suited for medium-sized farms and tasks that do not exceed its power threshold.
| Description | Zetor turbocharged diesel 4-cylinder liquid-cooled |
| Displacement | 239ci / 3.9L |
| Bore/Stroke | 4.016x4.724inches / 102x 120mm |
| Power | 78hp / 58.2kW |
| Compression | 17:1 |
| Rated RPM | 2200 |
| Starter volts | 12 |
ZETOR 7341 ENGINE
The Zetor 7341 features a robust 3.9L 4-cylinder diesel engine, providing optimal torque for various agricultural tasks while maintaining an efficient fuel consumption rate. With a 32-gallon (121.1 L) fuel tank, this tractor is well-suited for extended operations in the field without frequent refueling, enhancing productivity. However, the engine's capacity may limit performance under heavy loads or hilly terrains, so it's crucial to assess workload requirements before deployment.
| Description | Zetor 3.9L 4-cyl diesel |
| Fuel tank | 32gal / 121.1L |
TRANSMISSION 1
The Zetor 7341 features a synchro mesh transmission with 10 forward and 2 reverse gears, allowing for smooth gear transitions which is advantageous for various terrain conditions. Its hydraulic cerametallic clutch with a diameter of 304.8mm provides durability and efficient power transfer, though it may necessitate more maintenance than traditional clutches. Overall, this combination makes the Zetor 7341 suitable for load management and precision tasks in agricultural applications.
| Transmission | synchro mesh |
| Gears | 10 forward and 2 reverse |
| Clutch | hydraulic 304.8mm cerametallic disc |
TRANSMISSION 2
The Zetor 7341 features a mechanical shuttle transmission with 10 forward and reverse gears, allowing for versatile operation and smooth directional change without clutching. This configuration enhances productivity in tasks requiring frequent speed adjustments, such as plowing or loader work. However, the mechanical shuttle may not provide the same ease of use as hydrostatic alternatives, particularly in applications demanding precise speed control.
| Transmission | mech shuttle |
| Gears | 10 forward and reverse |
MECHANICAL
The Zetor 7341 features a robust 4x4 MFWD drivetrain, enhancing traction and stability in various terrains, making it suitable for both agricultural and light industrial applications. Its hydraulic wet disc brakes provide reliable stopping power, particularly in adverse conditions, while the 10-speed transmission allows for efficient speed control and adaptability to different tasks. The option for air-conditioned cabs offers operator comfort during extended use, potentially improving productivity in hot climates.
| Chassis | 4x4 MFWD 4WD |
| Steering | power |
| Brakes | hydraulic wet disc |
| Cab | Two-post folding ROPS. Cab available with air-conditioning |
| Transmission | 10-speed |
HYDRAULICS
| Type | open center |
| Pressure | 2600psi / 179.3bar |
| Valves | 1 to 3 |
| Pump flow | 14gpm / 53.0lpm *Advertised. Tested flow was 10.3 GPM |
| Steering flow | 4gpm / 15.1lpm |
TRACTOR HITCH
| Rear Type | II/I |
| Control | position and draft control |
| Rear lift | 6830lbs / 3098kg *Advertised. Lift capacity during testing was 6185 pounds |
POWER TAKE-OFF (PTO)
| Rear PTO | independent |
| Rear RPM | 540/540/1000 |
ZETOR 7341 TIRES
The Zetor 7341 features a robust tire configuration, with 13.6R24 agricultural tires at the front and 18.4R34 at the rear, providing enhanced traction and stability in diverse field conditions. This setup is advantageous for heavy-duty applications, aiding in soil penetration and reducing compaction, particularly in tilled fields. However, users should be aware of potential challenges in maneuverability in tighter spaces due to the larger rear tires and ensure proper ballast for optimal performance.
| Ag front | 13.6R24 |
| Ag rear | 18.4R34 |
DIMENSIONS
| Wheelbase | 86.5inches / 219cm |
| Length | 144inches / 365cm |
| Width | 74inches / 187cm |
| Height | 105inches / 266cm |
| Weight | 7960lbs / 3610kg |
DIMENSIONS & TIRES
The Zetor 7341 features an 86.5-inch wheelbase, providing stability and maneuverability, suitable for both fieldwork and transport tasks. With a weight of 7960 lbs (3610 kg), it offers a good balance of power and traction, advantageous for plowing and heavy-duty tasks. However, the tire dimensions (front: 13.6R24; rear: 18.4R34) might limit its performance in extremely muddy conditions, addressing soil compaction and traction challenges.
| Wheelbase | 86.5inches / 219cm |
| Weight | 7960lbs / 3610kg |
| Front tire | 13.6R24 |
| Rear tire | 18.4R34 |
ZETOR 102H LOADER
| Loader weight | 2100lbs / 952kg |
| Height (to pin) | 122inches / 309cm |
| Clearance, dumped bucket | 98inches / 248cm |
| Dump reach | 38inches / 96cm |
| Dump angle | 40° |
| Reach at ground | 73inches / 185cm |
| Rollback angle | 20° |
| Breakout force (at pin) | 5320lbs / 2413kg |
| Breakout force (at 800mm) | 2860lbs / 1297kg |
| Lift to full height (at pin) | 3930lbs / 1782kg |
| Lift to full height (at 800mm) | 2030lbs / 920kg |
| Bucket width | 73inches / 185cm |
| Raise time to height | 4 s |
| Bucket dump time | 4 s |
| Rollback time | 3.5 s |
ZETOR 102SLX LOADER
| Loader weight | 2300lbs / 1043kg |
| Height (to pin) | 127inches / 322cm |
| Clearance, dumped bucket | 91inches / 231cm |
| Dump reach | 20inches / 50cm |
| Dump angle | 60° |
| Reach at ground | 83inches / 210cm |
| Rollback angle | 40° |
| Breakout force (at pin) | 5960lbs / 2703kg |
| Breakout force (at 800mm) | 4280lbs / 1941kg |
| Lift to full height (at pin) | 4670lbs / 2118kg |
| Lift to full height (at 800mm) | 2500lbs / 1134kg |
| Bucket width | 73inches / 185cm |
| Raise time to height | 5.2 s |
| Bucket dump time | 2.5 s |
| Rollback time | 2 s |
ZETOR 112SLX LOADER
| Loader weight | 2450lbs / 1111kg |
| Height (to pin) | 136inches / 345cm |
| Clearance, dumped bucket | 96inches / 243cm |
| Dump reach | 34inches / 86cm |
| Dump angle | 60° |
| Reach at ground | 90inches / 228cm |
| Rollback angle | 40° |
| Breakout force (at pin) | 5180lbs / 2349kg |
| Breakout force (at 800mm) | 3590lbs / 1628kg |
| Lift to full height (at pin) | 3270lbs / 1483kg |
| Lift to full height (at 800mm) | 2120lbs / 961kg |
| Bucket width | 73inches / 185cm |
| Raise time to height | 5.6 s |
| Bucket dump time | 2.5 s |
| Rollback time | 2 s |
ELECTRICAL
| Charging system | alternator |
| Charging amps | 75 |
| Battery volts | 12 |