| Manufacturer |
SAME |
| Price |
- |
| Model |
Silver3 110 |
| Equipment Type |
Utility Tractors |
| Factory |
|
SAME SILVER3 110 POWER
| Engine (gross) |
109hp / 81.3kW |
ENGINE DETAIL
The SAME Silver3 110 tractor, powered by a 4.0L Deutz turbocharged diesel engine, offers a robust 109hp at 2100 RPM with a significant torque output of 295 lb-ft at 1400 RPM, providing good operability for heavy-duty applications. Its Stage III emissions compliance ensures it meets environmental regulations, yet the turbocharging can present a challenge in terms of maintenance and potential lag under high load if not properly managed. Owners should consider scenarios involving both fieldwork and transport, where the high torque at low RPM can enhance productivity in demanding tasks like plowing or tilling.
| Description |
Deutz turbocharged diesel 4-cylinder liquid-cooled |
| Displacement |
246.4ci / 4.0L |
| Bore/Stroke |
3.98x4.96inches / 101x 126 mm |
| Emissions |
Stage III |
| Rated Power (2000/25/CE) |
109hp / 81.3kW |
| Rated RPM |
2100 |
| Torque |
295 lb-ft /400.0 Nm |
| Torque RPM |
1400 |
| Starter type |
electric |
SAME SILVER3 110 ENGINE
The SAME Silver3 110 tractor is powered by a Deutz 4.0L 4-cylinder diesel engine, providing a balance between efficiency and power for various agricultural applications. With a fuel tank capacity of 42.3 gallons (160.1 liters), it offers extended operation times, reducing the frequency of refueling during long workdays. However, the relatively smaller engine displacement may limit torque at lower RPMs compared to larger engines, necessitating optimal gear selection for challenging terrain.
| Description |
Deutz 4.0L 4-cyl diesel |
| Fuel tank |
42.3gal / 160.1L |
TRANSMISSIONS OVERVIEW
The SAME Silver3 110 tractor features a 60-speed transmission with a three-speed power shift system, offering enhanced versatility and efficient torque management across various field conditions. This multi-speed configuration allows for optimal performance in tasks that require precise speed control, such as tillage or planting. However, the complexity of the transmission may require additional maintenance and operator training to fully leverage its capabilities, making it ideal for experienced operators in larger agricultural operations.
| Description |
60-speed three-speed power shift/three-speed power shift |
TRANSMISSION 1
The SAME Silver3 110 tractor features a three-speed power shift transmission with five synchronized gears across four ranges, providing a total of 60 forward and reverse gear combinations. This configuration enhances operational flexibility and efficiency, allowing for precise speed management during various tasks, such as plowing or hauling. However, the complexity of the transmission may require additional maintenance and operator training to maximize performance and minimize wear.
| Type |
three-speed power shift |
| Gears |
60 forward and reverse |
| Description |
Five synchronized gears in four ranges with three-speed power shift. |
TRANSMISSION 2
The SAME Silver3 110 features a continuously-variable transmission (CVT) with a three-speed power shift, allowing for smooth gear transitions and efficient power delivery. The infinite forward and reverse gears enhance maneuverability, particularly in tight spaces and varied terrain. However, operators must be aware of potential maintenance complexities associated with CVT systems, which require specialized knowledge and service.
| Transmission |
Continuo |
| Type |
three-speed power shift |
| Gears |
infinite forward and reverse |
| Description |
Two-range continuously-variable transmission. |
MECHANICAL
The SAME Silver3 110 tractor features a 4x4 MFWD chassis, enhancing traction in diverse field conditions. Its advanced 60-speed transmission with three-speed power shift allows for optimal speed and torque management, making it suitable for both light tasks and heavy-duty operations. However, while the hydraulic wet disc brakes provide reliable stopping power, additional maintenance may be required to ensure consistent performance in demanding environments.
| Chassis |
4x4 MFWD 4WD |
| Final drives |
electro-hydraulic front and rear |
| Steering |
power |
| Brakes |
hydraulic wet disc |
| Trailer brakes |
hydraulic/pneumatic |
| Cab |
Cab standard with air-conditioning. |
| Transmissions |
60-speed three-speed power shift/three-speed power shift |
HYDRAULICS
| Pump flow |
15.3gpm / 57.9lpm |
TRACTOR HITCH
| Rear lift |
11684lbs / 5299kg/13669lbs / 6200kg |
POWER TAKE-OFF (PTO)
| Rear PTO |
independent |
| Clutch |
electro-hydraulic wet disc |
| PS Rear RPM |
540E/540 / 1000E/1000 |
| CVT Rear RPM |
540E/540 / 1000 |
| Front PTO |
independent |
| Front RPM |
1000 |
DIMENSIONS
| Wheelbase |
92.1inches / 233cm |
| PS Length |
157.1inches / 399cm |
| CVT Length |
163.4inches / 415cm |
| Width |
80.7inches / 204cm *Minimum width. |
| Height (cab) |
104.7inches / 265cm |
| PS Weight |
9259lbs / 4199kg |
| CVT Weight |
9700lbs / 4399kg |
| Ground clearance |
19.7inches / 50cm |
| Front tread |
63 to 92.7inches / 160to 235 cm |
| Rear tread |
63 to 92.7inches / 160to 235 cm |
DIMENSIONS & TIRES
The SAME Silver3 110 features a wheelbase of 92.1 inches (233 cm), which enhances stability and maneuverability in tight spaces, beneficial for diverse agricultural tasks. Weighing between 9,259 to 9,700 pounds, it provides substantial traction and stability, crucial for heavy-duty applications but may pose challenges for transportation or operation in soft soil conditions. Ensure to assess weight distribution when using attachments to avoid potential tipping or damage.
| Wheelbase |
92.1inches / 233cm |
| Weight |
9259 to 9700 pounds |
ELECTRICAL
