| Manufacturer |
Renault |
| Price |
- |
| Model |
56 |
| Equipment Type |
- |
| Factory |
Germany |
RENAULT 56 POWER
ENGINE DETAIL
The Renault 56 tractor features a robust MWM D325-3 engine, providing moderate power output of 43 hp, suitable for light to moderate agricultural tasks. With a torque peak of 122.4 lb-ft at 1500 RPM, it offers good pulling capability for implements like plows and harrows within its class. However, the displacement of 2.6 L and relatively low RPM may limit its performance in more demanding applications, making it essential to match the task with the tractor's capabilities.
| Description |
MWM D325-3/3-cylinder |
| Displacement |
155.7 ci/2.6 L |
| Bore/Stroke |
3.74x4.724 inches/95 x 120 mm |
| Power |
43 hp/32.1 kW |
| Rated RPM |
2150 |
| Torque |
122.4 lb-ft/166.0 Nm |
| Torque RPM |
1500 |
RENAULT 56 ENGINE
The Renault 56 tractor, equipped with a MWM 2.6L three-cylinder engine, offers a compact and efficient powertrain suitable for various agricultural tasks. With a fuel tank capacity of 14.5 gallons (54.9 liters), it provides a reasonable range for continuous operation, although larger farms may find refueling necessary more frequently. The combination of its engine size and fuel tank capacity makes it ideal for light to moderate tasks, but potential buyers should consider its power output in relation to their specific workload requirements.
| Description |
MWM 2.6L 3-cyl |
| Fuel tank |
14.5 gal/54.9 L |
TRANSMISSION
The Renault 56 tractor features a 10 forward and 2 reverse gear configuration, providing versatility and efficient speed control for various agricultural tasks. The broad selection of forward gears allows for fine-tuning of speed suitable for both fieldwork and transport, while the two reverse gears facilitate maneuverability in tight spaces. However, the limited reverse options may challenge operations requiring frequent directional changes, particularly in constrained environments.
| Gears |
10 forward and 2 reverse |
MECHANICAL
The Renault 56 tractor features a 4x2 two-wheel drive (2WD) configuration, making it suitable for light to moderate agricultural tasks on relatively flat terrain but limiting traction in heavy soils. Its mechanical steering provides direct control, though it may require more effort than power-assisted systems during maneuvering. The 10-speed transmission enhances versatility in speed selection, allowing operators to optimize power output and fuel efficiency across various field conditions.
| Chassis |
4x2 2WD |
| Steering |
mechanical |
| Brakes |
drum |
| Transmission |
10-speed |
HYDRAULICS
| Total flow |
6.9 gpm/26.1 lpm |
TRACTOR HITCH
| Rear lift |
4,410 lbs/2000 kg |
POWER TAKE-OFF (PTO)
RENAULT 56 TIRES
The Renault 56 tractor features a front tire size of 6.00-16 and a rear tire size of 12.4-32, providing enhanced stability and adequate traction for various agricultural tasks. The combination of tire sizes suggests it is designed for maneuverability in tighter spaces while maintaining sufficient pulling power for fieldwork. However, the relatively narrow front tires may present challenges in muddy conditions, potentially limiting grip and requiring careful operation.
| Ag front |
6.00-16 |
| Ag rear |
12.4-32 |
DIMENSIONS
| Wheelbase |
74.8 inches/189 cm |
| Length |
139.0 inches/353 cm |
| Height |
96.9 inches/246 cm |
| Weight |
4,653 lbs/2110 kg |
DIMENSIONS & TIRES
The Renault 56 tractor features a compact wheelbase of 74.8 inches (189 cm), which enhances maneuverability in tight spaces, making it ideal for small farms and orchards. Weighing 4,653 lbs (2,110 kg) provides stability during operation, but may limit versatility on softer terrains. The tire specifications—front 6.00-16 and rear 12.4-32—suggest a balance between traction and flotation, although tire choice could impact performance in specific applications, like plowing versus landscaping.
| Wheelbase |
74.8 inches/189 cm |
| Weight |
4,653 lbs/2110 kg |
| Front tire |
6.00-16 |
| Rear tire |
12.4-32 |
