| Manufacturer | McCormick Intl |
| Price | - |
| Model | CX95 |
| Equipment Type | Utility Tractors |
| Factory | Doncaster, England |
MCCORMICK INTL CX95 POWER
| Engine (net) | 90hp / 67.1kW |
| Engine | 90hp / 67.1kW |
| PTO (claimed) | 74hp / 55.2kW |
ENGINES OVERVIEW
The McCormick Intl CX95 tractor offers two engine options: a Perkins 4.0L and a 4.4L four-cylinder diesel, providing versatility in power output and fuel efficiency. The 4.4L engine may deliver higher torque for demanding applications, while both engines are known for reliability and ease of maintenance. Operators should consider specific operational requirements, as the choice of engine can impact performance in tasks such as tilling, hauling, or loader operations.
| Description | Perkins 4.0L 4-cyl diesel Perkins 4.4L 4-cyl diesel |
ENGINE DETAIL 1
The McCormick Intl CX95, powered by a Perkins turbocharged diesel engine, delivers a rated power of 90 hp at 2200 RPM, making it suitable for moderate agricultural tasks and material handling. The engine's Torque of 261.8 lb-ft provides robust pulling capacity, advantageous for heavy loads but may present challenges in fuel efficiency under high-stress conditions. As it adheres to Tier I emissions regulations, regulatory compliance for newer environmental standards may be a concern if operating in regions with stricter emissions requirements.
| Description | Perkins turbocharged diesel 4-cylinder liquid-cooled The Tier I engine was used from the start of the CX 05 series in 2003 until spring of 2004 |
| Displacement | 243.5ci / 4.0L |
| Bore/Stroke | 3.937x5.00inches / 100x 127 mm |
| Emissions | Tier I |
| Rated Power (ECE R24) | 90hp / 67.1kW |
| Rated RPM | 2200 |
| Torque | 261.8 lb-ft /355.0 Nm |
| Starter volts | 12 |
ENGINE DETAIL 2
The McCormick Intl CX95 tractor is powered by a Tier II Perkins 1104 turbocharged diesel engine, delivering 90hp at 2200 RPM, which offers a robust performance suitable for moderate agricultural tasks. With a displacement of 4.4L and a bore/stroke ratio optimized for torque, it balances power with efficiency, though Tier II emissions compliance may limit use in some regions with strict environmental regulations. Challenges may include sourcing parts specific to this vintage engine given its introduction in 2004; however, its proven reliability and performance make it a solid choice for farmers needing a dependable tractor for various operations.
| Description | Perkins 1104 turbocharged diesel 4-cylinder liquid-cooled inline The Tier II Perkins 1104 was introduced in 2004 with the same horsepower rating as the original engine |
| Displacement | 268.5ci / 4.4L |
| Bore/Stroke | 4.134x5.00inches / 105x 127 mm |
| Emissions | Tier II |
| Power | 90hp / 67.1kW |
| Rated RPM | 2200 |
| Starter volts | 12 |
MCCORMICK INTL CX95 ENGINES
The McCormick Intl CX95 tractor features two engine options: a Perkins 4.0L and a 4.4L 4-cylinder diesel, providing a balance between power and fuel efficiency for various agricultural tasks. The 4.4L variant offers increased torque and payload capacity, ideal for heavy-duty applications, while the 4.0L is more suited for lighter tasks and offers better fuel economy. Key considerations include engine maintenance routines and compatibility with attachments, which can significantly impact operational efficiency and overall productivity.
| Description | Perkins 4.0L 4-cyl diesel Perkins 4.4L 4-cyl diesel |
TRANSMISSIONS OVERVIEW
The McCormick Intl CX95 features a robust 24-speed partial power shift transmission, facilitating efficient power distribution during varied field applications. Its 8-speed synchro shuttle enhances maneuverability in tight spaces, while the 16-speed partial power shift allows for precise speed adjustments. This combination is advantageous for tasks requiring both agility and power, such as loader work or transport tasks under diverse conditions.
| Description | 24-speed partial power shift 8-speed synchro shuttle 16-speed partial power shift |
TRANSMISSION 1
The McCormick Intl CX95 features a partial power shift transmission with 24 forward and reverse gears, enhancing operational flexibility and load management. Its wet disc clutch ensures smooth engagement and durability under various working conditions. The optional creeper gear extends this capability to 36 gears, ideal for tasks requiring precise speed control, such as tilling or planting in tight spaces.
| Transmission | Xtrashift |
| Type | partial power shift |
| Gears | 24 forward and reverse |
| Clutch | wet disc |
| Description | Eight gears with a three-range power shift for each gear. Optional creeper provides 36 gears forward and reverse. |
TRANSMISSION 2
The McCormick Intl CX95 features a synchro shuttle transmission, allowing for smooth gear shifts between forward and reverse, enhancing maneuverability during field operations. With 8 forward and reverse gears, it offers a versatile speed range suitable for various tasks, from tillage to transport. The dry disc clutch provides reliable performance but may require more frequent maintenance compared to wet clutches, especially in heavy-duty applications.
| Type | synchro shuttle |
| Gears | 8 forward and reverse |
| Clutch | dry disc |
SPEEDS 2
| Description | With 18.4-34 rear tires |
TRANSMISSION 3
The McCormick Intl CX95 features a partial power shift transmission that allows for 16 forward and 8 reverse gears, optimizing speed and torque for various field conditions. The dry disc clutch provides robust engagement but may require more maintenance than wet clutches in heavy-duty applications. This configuration is advantageous for tasks requiring frequent shifts, such as tillage or hauling, but may pose challenges in terms of operator fatigue during extended use.
| Type | partial power shift |
| Gears | 16 forward and 8 reverse |
| Clutch | dry disc |
| Description | Four gears in two ranges with two-speed power shift. |
MECHANICAL
The McCormick Intl CX95 tractor features a versatile chassis configuration of 4x2 and 4x4, catering to various terrain needs, making it suitable for both flat and hilly landscapes. Its hydrostatic power steering enhances maneuverability, while hydraulic wet disc brakes provide reliable stopping power, especially in demanding agricultural tasks. With multiple transmission options, including a 24-speed partial power shift, operators can achieve optimal efficiency in various operational scenarios, though the complexity of settings may require additional training.
| Chassis | 4x2 2WD/4x4 MFWD 4WD |
| Steering | hydrostatic power |
| Brakes | hydraulic wet disc |
| Cab | ROPS. Cab optional |
| Transmissions | 24-speed partial power shift/8-speed synchro shuttle/16-speed partial power shift |
CAPACITY
| Fuel | 41gal / 155.2L |
| Hydraulic system | 9.1gal / 34.4L (2WD)/9.7gal / 36.7L (4WD) |
HYDRAULICS
| Type | open center |
| Capacity | 9.1gal / 34.4L (2WD)/9.7gal / 36.7L (4WD) |
| Pump flow | 15.85gpm / 60.0lpm |
TRACTOR HITCH
| Rear lift | 8,543lbs / 3875kg |
POWER TAKE-OFF (PTO)
| Rear PTO | independent |
| Rear RPM | 540/1000 |
| Engine RPM | 540@2000 / 1000@2000 |
MCCORMICK INTL CX95 TIRES
The McCormick Intl CX95 features a robust 4WD configuration with Ag front tires sized 10.00-16/12.4R24 and rear tires 16.9R34, providing superior traction and stability on varied terrain. The tire selection enhances load distribution and maneuverability, making it suitable for both agricultural and utility tasks, particularly in fields requiring frequent turns or uneven surfaces. However, operators should be aware of potential challenges in narrower spaces due to the wider rear tire width, which may limit access in confined areas.
| Ag front | 10.00-16/12.4R24 (4WD) |
| Ag rear | 16.9R34 |
DIMENSIONS
| Wheelbase | 92.9inches / 235cm |
| Length | 165.8inches / 421cm |
| Height | 107.9inches / 274cm |
| 2WD Weight | 8312lbs / 3770kg |
| 4WD Weight | 8467lbs / 3840kg |
DIMENSIONS & TIRES
The McCormick Intl CX95 features a wheelbase of 92.9 inches, providing stability for diverse agricultural tasks, especially in tilled fields or rough terrain. Weighing between 8,312 to 8,467 pounds, its robust frame supports heavy-duty operations while the tire specifications—front 10.00-16 and rear 16.9R34—ensure optimal traction and weight distribution for enhanced performance. However, operators should consider potential challenges in maneuverability in confined spaces due to its larger dimensions.
| Wheelbase | 92.9inches / 235cm |
| Weight | 8312 to 8467 pounds |
| Front tire | 10.00-16 |
| Rear tire | 16.9R34 |
ELECTRICAL
| Ground | negative |
| Charging system | alternator |
| Charging amps | 65 |
| Battery volts | 12 |