| Manufacturer |
John Deere |
| Price |
24,558(USD) |
| Model |
3043D |
| Equipment Type |
Compact Utility Tractors |
| Factory |
|
KEY SPECS
| Engine power (gross) |
31 kW/41.6 hp |
| Power take-off (PTO) power |
27.1 kW/36.3 hp |
| Steering hydraulics |
16.8 L/min/4.4 gpm |
| Implement hydraulics |
22.4 L/min/5.9 gpm |
| Hitch type |
Category 1 |
| Lift capacity, 24-in. behind link arms |
944 kg/2081.2 lb |
| Standard transmission; forward/reverse |
8F/8R synchromesh shuttle shift gear transmission |
| Cruise control |
No |
| Approximate shipping weight (open-station; cab) |
Open operator station (OOS): 1288 kg/2840 lb/Cab: Not applicable |
| Wheelbase |
1574 mm/62 in. |
ENGINE
The John Deere 3043D, powered by a Yanmar 3TNV86CT-KJPT engine, offers a robust 31 kW with turbocharging, enhancing performance at a rated speed of 2800 rpm. Its Final Tier 4 emissions compliance ensures environmentally friendly operation, while the high-pressure common rail direct injection system optimizes fuel efficiency and power delivery. With a compact design (1.57 L displacement, 3 cylinders), this tractor is ideal for agriculture tasks requiring durability and effective torque (105.7 Nm) in tight spaces.
| Manufacturer |
Yanmar® |
| Engine model |
3TNV86CT-KJPT |
| Engine power (gross) |
31 kW/41.6 hp |
| Power take-off (PTO) power |
27.1 kW/36.3 hp |
| Rated engine speed |
2800 rpm |
| Injection pump type |
High pressure common rail direct injection |
| Aspiration |
Turbocharged |
| Emissions compliance |
Final Tier 4 |
| Cylinders/displacement |
3 / 1.57 L/3 / 95.8 cu in. |
| Number of cylinders |
Three |
| Cylinder liners |
Cast-in-block |
| Bore and stroke |
86 x 90 mm/3.39 x 3.54 in. |
| Compression ratio |
19.1:1 |
| Lubrication |
Pressurized |
| Cooling system |
Liquid |
| Air cleaner |
Dual element |
| Engine torque at rated speed |
105.7 Nm/78 lb-ft |
| Fuel tank capacity |
36.7 L/9.7 U.S. gal. |
ELECTRICAL
| Battery size |
600 CCA |
| Alternator (12-V) |
55 amp |
| Starter size |
1.4 kW/1.9 hp |
FUEL SYSTEM
| Type |
High pressure common rail direct injection |
TRANSMISSION
The John Deere 3043D tractor features an 8F/8R synchromesh shuttle shift transmission, allowing smooth forward/reverse gear transitions, which is beneficial for tasks requiring frequent direction changes. Its wet disk brakes provide reliable stopping power under load, while the differential lock enhances traction in challenging conditions, suitable for uneven terrain. However, the absence of a creeper gear may limit low-speed operation efficiency, making it less ideal for some precision applications such as tilling.
| Standard transmission; forward/reverse |
8F/8R synchromesh shuttle shift gear transmission |
| Left-hand reverser |
Yes |
| Transmission gear ranges |
Four gears and two ranges |
| Final drive |
Spur gear |
| Brakes |
Wet disk |
| Steering |
Power steering |
| Axle capacity |
Front/880 kg/1940 lb/Rear/1600 kg/3527 lb/ |
| Creeper |
No |
| Cruise control |
No |
| Differential lock |
Yes |
HYDRAULICS
| Type |
Open center |
| Pump rated output |
Steering/16.8 L/min/4.4 gpm/Implement/22.4 L/min/5.9 gpm/39.2 L/min/10.3 gpm |
| Pump type |
Single gear |
| Maximum operating pressure |
172 bar/2495 psi |
| Draft control sensing |
Position control |
| Remote control valves available |
Up to two (optional) |
3-POINT HITCH
| Type |
Category 1 |
| Lift capacity, 24-in. behind link arms |
944 kg/2081.2 lb |
POWER TAKE-OFF (PTO)
| Standard |
At 2400 rpm: 540 rpm |
| Control |
Mechanical |
| Clutch |
Transmission |
| Brake (for mid and rear PTO) |
Wet disk |
FLUID CAPACITIES
| Crankcase with filter |
4.5 L/4.8 qt |
| Transmission and hydraulic system |
33 L/34.8 qt |
FINAL DRIVE
OPERATOR STATION
| Rollover protective structure |
Type/Foldable/ASABE S478 |
| Platform - flat/straddle |
Straddle |
| Gear shift location - console/floor |
Right-hand side |
DIMENSIONS
| Wheelbase |
1574 mm/62 in. |
| Front axle clearance |
Minimum: 331 mm/13 in./Maximum: 353 mm/13.9 in. |
| Turning radius with brakes |
1.63 m/5.3 ft |
| Approximate shipping weight (open-station; cab) |
OOS: 1288 kg/2840 lb/Cab: Not applicable |
TIRES
The John Deere 3043D features versatile tire options catering to diverse applications: R1 Bar tires optimize traction for agricultural tasks, R3 Turf tires minimize ground disturbance for landscaping, and R4 Industrial tires enhance durability for material handling. The compact size allows for maneuverability in tight spaces, but be cautious as tire selection can impact stability and load capacity depending on usage. Consideration of the terrain and specific task requirements will be crucial in maximizing productivity with this tractor.
| Front |
R1 Bar: 7-14/R3 Turf: 27x8.5-15/R4 Industrial: 25x8.5-14 |
| Rear |
R1 Bar: 11.2-24/R3 Turf: 41x14-20/R4 Industrial: 15-19.5 |
MISCELLANEOUS
| Toolbox |
Yes |
| Tilt steering wheel |
No |
| 12-V Outlet |
No |
