| Manufacturer |
John Deere |
| Price |
25,926(USD) |
| Model |
2038R |
| Equipment Type |
Compact Tractors |
| Factory |
None |
KEY SPECS
| Engine power (gross) |
At SAE J1995 rated power: 27.4 kW/36.7 hp |
| Power take-off (PTO) power |
22.7 kW/30.4 hp |
| Steering hydraulics |
15 L/min/4 gpm |
| Implement hydraulics |
20.2 L/min/5.3 gpm |
| Hitch type |
Category 1 |
| Lift capacity, 24-in. behind link arms |
615 kg/1356 lb |
| Standard transmission; forward/reverse |
Hydrostatic transmission (HST) |
| Cruise control |
Standard |
| Approximate shipping weight (open-station; cab) |
Open station: 1320 kg/2910 lb/Cab: Not applicable |
| Wheelbase |
1723 mm/67.8 in. |
ENGINE
The John Deere 2038R, powered by the turbocharged Yanmar 3TNV88C-NJT engine, delivers a gross output of 36.7 hp at 2500 rpm with a PTO power of 30.4 hp, making it suitable for a range of agricultural tasks. Its Final Tier 4 compliance ensures reduced emissions, although the high compression ratio of 19.1:1 may require meticulous maintenance to avoid potential engine knock under load. With a compact size and a fuel tank of 32 L, it's advantageous for small to mid-sized operations needing efficient fuel management and ease of maneuverability in tight spaces.
| Manufacturer |
Yanmar® |
| Engine model |
3TNV88C-NJT |
| Engine power (gross) |
At SAE J1995 rated power: 27.4 kW/36.7 hp |
| Power take-off (PTO) power |
22.7 kW/30.4 hp |
| Rated engine speed |
2500 rpm |
| Type |
Direct Injection |
| Injection pump type |
Direct Injection |
| Aspiration |
Turbocharged |
| Emissions compliance |
Final Tier 4 |
| Cylinders/displacement |
Three cylinders: 1.568 L/95.8 cu in. |
| Number of cylinders |
Three |
| Cylinder liners |
Cast-in-block |
| Bore and stroke |
86x90 mm/3.39x3.54 in. |
| Compression ratio |
19.1:1 |
| Lubrication |
Pressurized |
| Cooling system |
Water pump |
| Air cleaner |
Dual element |
| Engine torque at rated speed |
104.7 Nm/77.2 lb-ft |
| Fuel tank capacity |
32 L/8.5 U.S. gal. |
ELECTRICAL
| Battery size |
500 CCA |
| Alternator (12-V) |
85 amp |
| Starter size |
1.4 kW/1.9 hp |
FUEL SYSTEM
TRANSMISSION
The John Deere 2038R features a hydrostatic transmission (HST) ideal for operators needing smooth speed adjustments, particularly beneficial in tight maneuvering scenarios. With a total axle capacity of 2,680 kg (5,901 lb), it can handle substantial loads, but the absence of a creeper gear may limit very low-speed applications in sensitive operations. The wet disc brakes and power steering enhance safety and ease of control, making this model suitable for both agricultural and utility tasks.
| Standard transmission; forward/reverse |
Hydrostatic transmission (HST) |
| Final drive |
Spur gear |
| Brakes |
Wet disc |
| Steering |
Power steering |
| Axle capacity |
Front/880 kg/1940 lb/Rear/1800 kg/3968 lb/ |
| Creeper |
No |
| Cruise control |
Standard |
| Differential lock |
Yes |
HYDRAULICS
| Type |
Open center |
| Pump rated output |
Steering/15 L/min/4 gpm/Implement/20.2 L/min/5.3 gpm/35.2 L/min/9.3 gpm |
| Pump type |
Dual gear |
| Maximum operating pressure |
172 bar/2495 psi |
| Draft control sensing |
Position control |
| Remote control valves available |
Up to three |
3-POINT HITCH
| Type |
Category 1 |
| Lift capacity, 24-in. behind link arms |
615 kg/1356 lb |
POWER TAKE-OFF (PTO)
| Standard |
Rear: 543 rpm/Mid: 1998 rpm |
| Control |
Independent |
| Clutch |
Wet disc |
| Brake (for mid and rear PTO) |
Wet disc |
FLUID CAPACITIES
| Crankcase with filter |
4.5 L/4.8 qt |
FINAL DRIVE
| Type |
Spur Gear |
| Differential lock |
Yes |
OPERATOR STATION
| Rollover protective structure |
Type/Foldable/ASABE S478 |
| Platform - flat/straddle |
Semi-flat |
DIMENSIONS
| Wheelbase |
1723 mm/67.8 in. |
| Turning radius with brakes |
2.46 m/8.07 ft |
| Approximate shipping weight (open-station; cab) |
Open station: 1320 kg/2910 lb/Cab: Not applicable |
TIRES
The John Deere 2038R offers versatile tire options including R1 Ag for traction in agricultural applications, R3 Turf for minimal ground disturbance, and R4 Industrial for durability in construction settings. The choice of tire affects not only mobility but also load capacity and soil protection, making it crucial to select based on specific operational needs. For example, R3 Turf tires are advantageous for residential landscaping but may provide less traction in wet conditions compared to R1 Ag tires, potentially limiting agricultural utility.
| Front |
R1 Ag 7.00-12/R3 Turf 23x8.50-14/R4 Industrial 23x8.50-14/R3 Turf Radial 200/60 R15 |
| Rear |
R1 Ag 12.4-16/R3 Turf 14-17.5/R4 Industrial 14-17.5/R3 Turf Radial 300/70 R20 |
MISCELLANEOUS
| Toolbox |
Yes |
| Tilt steering wheel |
Yes |
| 12-V Outlet |
Yes |
