| Manufacturer |
Fendt |
| Price |
- |
| Model |
380GTA |
| Equipment Type |
Tool Carrier Tractors |
| Factory |
|
FENDT 380GTA POWER
ENGINE DETAIL
The Fendt 380GTA, equipped with a KHD turbocharged diesel 4-cylinder engine, offers a compact yet powerful performance with 93.7 hp and notable torque of 256.7 lb-ft at 1500 RPM, ideal for demanding applications like tillage and hauling. Its air-cooled system enhances reliability and reduces maintenance frequency, particularly in warm environments. However, the relatively low rated RPM of 2400 may limit its speed versatility compared to higher RPM models, which could impact transport efficiency.
| Description |
KHD turbocharged diesel 4-cylinder air-cooled |
| Displacement |
249.3ci / 4.1L |
| Bore/Stroke |
4.02x4.92inches / 102x 125mm |
| Power |
93.7hp / 69.9kW |
| Rated RPM |
2400 |
| Torque |
256.7lb-ft / 348.1Nm |
| Torque RPM |
1500 |
FENDT 380GTA ENGINE
The Fendt 380GTA is powered by a KHD 4.1L 4-cylinder diesel engine, which provides a good balance of power and fuel efficiency for medium-duty agricultural tasks. With a fuel capacity of 21.1 gallons (79.9 liters), this tractor can operate for extended periods before refueling, reducing downtime during fieldwork. However, its size may limit maneuverability in tighter spaces, making it better suited for larger fields or open agricultural environments.
| Description |
KHD 4.1L 4-cyl diesel |
| Fuel tank |
21.1gal / 79.9L |
TRANSMISSION
The Fendt 380GTA features a 21 forward and 6 reverse gear configuration, enhancing operational versatility in various agricultural applications. The three-speed electric shift across two ranges allows for seamless gear transitions, ideal for varied terrains and workload dynamics. The inclusion of overdrive speeds enables efficient travel at higher velocities, maximizing productivity during transport tasks, but necessitates adequate operator familiarity to leverage gear optimization fully.
| Gears |
21 forward and 6 reverse |
| Description |
Three gears (1-3) plus reverse (R) in two ranges with three-speed electric shift. An additional three overdrive speeds are available on the gear shift |
MECHANICAL
The Fendt 380GTA features a 4x4 MFWD chassis, enhancing traction in challenging terrains and improving stability during operation. Its 21-speed transmission allows for flexible speed management, which is crucial for various applications, from fieldwork to transport tasks. However, the complexity of the hydraulic disc brakes may require regular maintenance and servicing to ensure optimal performance.
| Chassis |
4x4 MFWD 4WD |
| Steering |
power |
| Brakes |
hydraulic disc |
| Cab |
Cab standard with heater |
| Transmission |
21-speed |
HYDRAULICS
| Pump flow |
10.6gpm / 40.1lpm |
| Total flow |
18gpm / 68.1lpm |
| Steering flow |
7.4gpm / 28.0lpm |
TRACTOR HITCH
| Rear Type |
II |
| Rear lift |
9656lbs / 4379kg |
| Front Hitch |
II |
| Front lift |
4811lbs / 2182kg |
POWER TAKE-OFF (PTO)
| Rear PTO |
independent |
| Rear RPM |
540/750/540/1000 |
| Front PTO |
independent |
| Front RPM |
1000 |
FENDT 380GTA TIRES
The Fendt 380GTA's standard tire configuration (12.4R24 front and 16.9R34 rear) offers a balanced pressure distribution ideal for general agricultural tasks, enhancing traction and stability in diverse terrains. The optional tire size (12.4R24 front and 13.6R38 rear) allows for improved flotation in softer soils, which can minimize soil compaction during tillage operations. Choosing between these tire setups should consider the specific soil conditions and intended applications, with wider rear tires being advantageous for heavier loads and wet fields.
| Standard tires (ag) |
Front: 12.4R24. Rear: 16.9R34 |
| Optional tires (ag) |
Front: 12.4R24. Rear: 13.6R38 |
DIMENSIONS
| Wheelbase |
98.4inches / 249cm |
| Length |
167.3inches / 424cm |
| Width |
76.8inches / 195cm |
| Height |
103.2inches / 262cm |
| Shiping weight |
8774lbs / 3979kg |
| Max weight |
15432lbs / 6999kg |
| Ground clearance |
18.1inches / 45cm |
| Front tread |
61.8 to 70.9inches / 156to 180cm |
| Rear tread |
65.4 to 78.7inches / 166to 199cm |
DIMENSIONS & TIRES
The Fendt 380GTA's wheelbase of 98.4 inches enhances stability during field operations, making it suitable for maneuvering in tight spaces. Weighing 8,774 lbs, this tractor offers good traction and stability, although it may limit mobility on softer ground. The tire specifications (12.4R24 front and 16.9R34 rear) indicate a balanced configuration for agricultural tasks, but operators should be mindful of tire choice based on soil conditions to optimize performance.
| Wheelbase |
98.4inches / 249cm |
| Weight |
8774lbs / 3979kg |
| Front tire |
12.4R24 |
| Rear tire |
16.9R34 |
FENDT 3 LOADER
| Height (to pin) |
143.7inches / 364cm |
| Dump reach |
68.1inches / 172cm |
| Dump angle |
55° |
| Rollback angle |
31° |
| Breakout force (lift) |
4387lbs / 1989kg |
| Lift to full height (at pin) |
3175lbs / 1440kg |
FENDT 3S LOADER
| Height (to pin) |
149.2inches / 378cm |
| Dump reach |
80.1inches / 203cm |
| Dump angle |
45° |
| Rollback angle |
43° |
| Breakout force (lift) |
4850lbs / 2199kg |
| Lift to full height (at pin) |
3704lbs / 1680kg |
ELECTRICAL
| Charging system |
alternator |
| Charging amps |
55 |
| Charging volts |
14 |
| Battery AH |
110 |
