| Manufacturer |
Deutz-Fahr |
| Price |
- |
| Model |
DX 4.10 |
| Equipment Type |
Utility Tractors |
| Factory |
|
DEUTZ-FAHR DX 4.10 POWER
ENGINE DETAIL
The Deutz-Fahr DX 4.10, powered by an air-cooled Deutz F4L 912 diesel engine, offers a displacement of 3.8L, optimizing torque and fuel efficiency for tasks such as tilling and hauling. Its 68.4 hp at 2300 RPM provides strong performance for mid-range applications, though air cooling may pose a challenge in extremely high temperatures, requiring operators to monitor engine conditions closely. The 12-volt electric starter ensures reliable startup, making it suitable for field operations that demand consistent reliability.
| Description |
Deutz F4L 912 diesel 4-cylinder air-cooled |
| Displacement |
230ci / 3.8L |
| Bore/Stroke |
3.94x4.72inches / 100x 120mm |
| Power |
68.4hp / 51.0kW |
| Rated RPM |
2300 |
| Starter |
electric |
| Starter volts |
12 |
DEUTZ-FAHR DX 4.10 ENGINE
The Deutz-Fahr DX 4.10 is equipped with a robust 3.8L 4-cylinder diesel engine, which offers a good balance of power and fuel efficiency. With a substantial fuel tank capacity of 31.7 gallons (120.0 liters), this tractor is well-suited for extended operations without frequent refueling, ideal for large agricultural tasks. However, operators should consider the weight of the fuel when calculating overall load capacity, as it may impact maneuverability in certain conditions.
| Description |
Deutz 3.8L 4-cyl diesel |
| Fuel tank |
31.7gal / 120.0L |
TRANSMISSIONS OVERVIEW
The Deutz-Fahr DX 4.10 tractor features a 15-speed synchronized transmission complemented by a 20-speed creeper mode, providing extensive control over speed and torque for varied agricultural tasks. This dual transmission system enhances efficiency in both high-speed transport and low-speed applications, such as tillage or plowing, allowing for optimal performance across diverse terrains. However, operators may need additional training to navigate the complexities of both transmission types effectively.
| Description |
15-speed synchronized 20-speed creeper |
TRANSMISSION 1
The Deutz-Fahr DX 4.10 features a synchronized transmission with 15 forward and 5 reverse gears, providing versatility across various operational ranges (Low, Medium, and High). This configuration is advantageous for fine-tuning speed and torque characteristics, enhancing performance in applications such as tillage and hauling. However, the complexity of managing multiple ranges may pose a learning curve for operators new to synchronized gear systems, especially in demanding scenarios.
| Type |
synchronized |
| Gears |
15 forward and 5 reverse |
| Description |
Five gears (1-5) in three ranges (L/M/H) plus reverse (R) range |
SPEEDS 1
| Description |
With 18.4-34 rear tires |
TRANSMISSION 2
The Deutz-Fahr DX 4.10 tractor features a creeper transmission, allowing for precise low-speed operation, which is advantageous in applications like planting or tilling on uneven terrain. With 20 forward and 5 reverse gears, it provides versatility for various tasks and optimal control over speed and torque. However, the complexity of the transmission may require more maintenance and operator training to fully utilize its capabilities.
| Type |
creeper |
| Gears |
20 forward and 5 reverse |
SPEEDS 2
| Description |
With 18.4-34 rear tires |
MECHANICAL
The Deutz-Fahr DX 4.10 features a 4x4 MFWD chassis for enhanced traction and stability in diverse terrains. Its 15-speed synchronized transmission, complemented by a 20-speed creeper option, allows for precise speed control during heavy-duty operations, making it ideal for tasks requiring high torque at low speeds, such as plowing. However, the hydraulic drum brakes may require more frequent maintenance compared to disc brakes, especially in demanding conditions, posing a challenge for continuous operation.
| Chassis |
4x4 MFWD 4WD |
| Steering |
power |
| Brakes |
hydraulic drum |
| Transmissions |
15-speed synchronized 20-speed creeper |
HYDRAULICS
| Pump flow |
10.6gpm / 40.1lpm |
TRACTOR HITCH
| Rear Type |
II |
| Rear lift |
8385lbs / 3803kg |
| Front Hitch |
II |
| Front lift |
3968lbs / 1799kg |
POWER TAKE-OFF (PTO)
| Rear PTO |
independent |
| Rear RPM |
540/1000 |
| Front PTO |
independent |
| Front RPM |
1000 |
DEUTZ-FAHR DX 4.10 TIRES
The Deutz-Fahr DX 4.10 features standard agricultural tires with a front size of 13.6-24 and a rear size of 18.4-34, providing optimal traction and stability on various terrains. This tire configuration enhances field performance, making it suitable for tillage and hauling tasks, but may limit maneuverability in tighter spaces. Consider an alternative tire setup for greater versatility if operating in confined areas or different soil conditions.
| Standard tires (ag) |
Front: 13.6-24. Rear: 18.4-34 |
DIMENSIONS
| Wheelbase |
94.5inches / 240cm |
| Length |
163inches / 414cm |
| Width |
90.6inches / 230cm |
| Height |
105.9inches / 268cm |
| Weight |
8642lbs / 3920kg |
| Max weight |
12566lbs / 5699kg |
| Ground clearance |
16.7inches / 42cm |
| Front tread |
59.1 to 74.8inches / 150to 189cm |
| Rear tread |
63 to 78.7inches / 160to 199cm |
DIMENSIONS & TIRES
The Deutz-Fahr DX 4.10's wheelbase of 94.5 inches (240 cm) provides stability and maneuverability in tight spaces, making it suitable for both fieldwork and tractor operations in orchards or vineyards. Weighing 8,642 lbs (3,920 kg) allows for substantial traction which is beneficial for heavy-duty applications like plowing or towing, though it may limit mobility on softer or uneven terrain. The tire sizes (13.6-24 front and 18.4-34 rear) enhance ground contact and load distribution, offering an advantage in combating soil compaction while ensuring adequate flotation in various soil conditions.
| Wheelbase |
94.5inches / 240cm |
| Weight |
8642lbs / 3920kg |
| Front tire |
13.6-24 |
| Rear tire |
18.4-34 |
