| Manufacturer | CaseIH |
| Price | 23,400(USD) |
| Model | 2150 |
| Equipment Type | Orchard Vineyard Tractors |
| Factory | Carraro |
ENGINE DETAIL
The CaseIH 2150 tractor features a robust SLH 1000.4.A diesel engine with a 4.0L displacement, delivering 200 lb-ft of torque at 1200 RPM, which ensures efficient power delivery for demanding agricultural tasks. Its air-cooled system and dual dry element air cleaner help maintain performance in various operating environments, while a compression ratio of 17:1 contributes to fuel efficiency and engine longevity. However, the 12V electric starter system may pose challenges in extremely cold conditions; thus, considering operational climate is crucial when planning usage scenarios.
| Description | SLH 1000.4.A diesel 4-cylinder air-cooled |
| Displacemen | 244.1ci / 4.0L |
| Bore/Strok | 4.134x4.547inches / 105x 115mm |
| Air cleane | dual dry element |
| Compressio | 17:1 |
| Rated RP | 2350 |
| Torqu | 200lb-ft / 271.2Nm |
| Torque RP | 1200 |
| Firing orde | 1-3-4-2 |
| Starte | electric |
| Starter volt | 12 |
| Oil capacit | 9.7qts / 9.2L |
| Intake valve clearanc | 0.008inches*Cold / 0.203mm |
| Exhaust valve clearanc | 0.008inches*Cold / 0.203mm |
CASEIH 2150 ENGINE
The CaseIH 2150 features a SLH 4.0L four-cylinder diesel engine, providing efficient fuel consumption and robust torque output for various agricultural tasks. With a 15.85-gallon fuel tank, it allows for extended operating periods, making it suitable for medium-sized farming operations or tasks requiring prolonged engine use. However, operators should note the weight-to-power ratio and potential challenges in fuel economy versus larger models; careful planning is essential for optimal performance in demanding conditions.
| Description | SLH 4.0L 4-cyl diesel |
| Fuel tan | 15.85gal / 60.0L |
TRANSMISSIONS OVERVIEW
The CaseIH 2150 tractor features an 8-speed partially synchronized transmission with an additional 12-speed partially synchronized option, offering flexibility in various field operations. The partially synchronized design allows for easier gear shifts under load, enhancing operational efficiency, though it may not provide the seamlessness of a fully synchronized system, potentially resulting in more wear over time. This transmission setup is advantageous for varied tasks requiring precise power management, but operators must be mindful of shifting techniques to mitigate stress on the drivetrain.
| Description | 8-speed partially synchronized 12-speed partially synchronized |
TRANSMISSION 1
The CaseIH 2150 tractor features a partially synchronized transmission with 8 forward and reverse gears, ideal for versatility in various field conditions. The requirement to stop and use the clutch for gear and range shifts can enhance operational safety but may reduce efficiency during frequent direction changes. Notably, its oil capacities of 38qts for 2WD and 40.2qts for 4WD highlight the need for consistent maintenance to ensure optimal lubrication and performance.
| Typ | partially synchronized |
| Gear | 8 forward and reverse |
| Clutc | 280mm dry disc |
| 2WD Oil capacit | 38qts / 36.0L |
| 4WD Oil capacit | 40.2qts / 38.0L |
| Description | Four synchronized gears (1-4) in two ranges (I/II) with right-hand mechanical shuttle lever. Clutch must be used to shift direction or gear. Tractor must be stopped, and clutch used, to shift range |
SPEEDS 1
| Description | With 13.6-28 rear tires. Reverse speeds are 15% slower than forward |
TRANSMISSION 2
The CaseIH 2150 features a partially synchronized transmission with 12 forward and reverse gears, enhancing flexibility in speed selection for varied field applications. A mechanical shuttle lever simplifies direction changes, although it necessitates complete stops and clutch use for gear and range shifts, which could slow operations in time-sensitive tasks. The oil capacities for 2WD and 4WD are adequate for maintaining hydraulic and transmission efficiency but may require diligent monitoring to prevent overheating during prolonged use.
| Typ | partially synchronized |
| Gear | 12 forward and reverse |
| Clutc | 280mm dry disc |
| 2WD Oil capacit | 38qts / 36.0L |
| 4WD Oil capacit | 40.2qts / 38.0L |
| Description | Four synchronized gears (1-4) in three ranges (I/II/III) with right-hand mechanical shuttle lever. Clutch must be used to shift direction or gear. Tractor must be stopped, and clutch used, to shift range |
SPEEDS 2
| Description | With 13.6-28 rear tires. Reverse speeds are 15% slower than forward |
CASEIH 2150 TRANSMISSIONS
The CaseIH 2150 tractor features an 8-speed partially synchronized transmission, which provides smooth gear shifts and decent torque management for various field applications. Its 12-speed partially synchronized option enhances versatility and precision in speed control, making it suitable for both heavy tillage and transport tasks. However, the reliance on partial synchronization may pose challenges in rapid gear changes under heavy loads, necessitating careful operation to avoid gearbox strain.
| Description | 8-speed partially synchronized 12-speed partially synchronized |
MECHANICAL
The CaseIH 2150 tractor features hydrostatic power steering, providing smooth maneuverability in tight agricultural environments. Its four-wheel drive system enhances traction, while wet disc brakes offer superior stopping power and longevity, especially beneficial in varying terrain conditions. However, the optional cab may reduce operator comfort in adverse weather, indicating a potential trade-off between protection and cost.
| Description | Four-wheel drive Wet disc brakes Two-post forward-folding ROPS. Cab optional |
| Steerin | hydrostatic power |
| Trailer brake | hydraulic |
HYDRAULICS
| Typ | open center |
| Valve | 1 or 2 |
| Pump flo | 15.6gpm / 59.0lpm |
TRACTOR HITCH
| Rear Typ | I/II |
| Contro | position and draft control |
| 2150V Rear lift (at ends | 5575lbs / 2528kg |
| 2150E Rear lift (at ends | 5463lbs / 2478kg |
POWER TAKE-OFF (PTO)
| Rear PT | independent |
| Rear RP | 540/750 / 1000 (1.375) |
| Engine RP | 540@2115 / 750@2015 / 1000@2105 |
CASEIH 2150 TIRES
The CaseIH 2150 tractor offers versatility with two tire configurations: the 2150V, featuring narrower front and wider rear tires, provides enhanced maneuverability for tighter agricultural tasks, while the 2150E, with broader front tires, optimizes traction and stability on varied terrains. In both configurations, the larger rear tires enable better weight distribution and reduce soil compaction, crucial for sustainable farming. However, the choice between these tire options will ultimately depend on the specific field conditions and the intended use, such as crop type or landscape.
| 2150V Standard tires (ag | Front: 8.25-16. Rear: 13.6R28 |
| 2150E Standard tires (ag | Front: 10.5-15. Rear: 14.9R28 |
DIMENSIONS & TIRES
The CaseIH 2150 tractor features a wheelbase of 81.7 inches, providing stability for various agricultural applications, though it may limit maneuverability in tight spaces. Weighing between 4718 to 4806 pounds offers a favorable power-to-weight ratio for traction, particularly in heavy tillage. With front tires sized 8.25-16 and rear tires 13.6R28, it is optimized for field work but may require additional ballast for optimal performance in hilly terrain.
| Wheelbas | 81.7inches / 207cm |
| Weigh | 4718 to 4806 pounds |
| Front tir | 8.25-16 |
| 2150V Rear tir | 13.6R28 |
ELECTRICAL
| Groun | negative |
| Charging syste | alternator |
| Charging amp | 55 |
| Battery volt | 12 |
| Battery A | 100 |