| Manufacturer |
Case |
| Price |
4,900(USD) |
| Model |
500 |
| Equipment Type |
Standard-Tread Tractors |
| Factory |
Racine, Wisconsin, USA |
ENGINE DETAIL
The Case 500 tractor features a robust 6-cylinder diesel engine with a displacement of 377 ci (6.2L), offering substantial torque for heavy-duty applications. Its compression ratio of 15:1 contributes to fuel efficiency and power output, while the oil bath air cleaner ensures optimal engine protection from particulates. However, the relatively low rated RPM of 1350 may limit its maximum speed and responsiveness in certain tasks, making it ideal for steady, power-intensive operations rather than high-speed applications.
| Description |
J.I. Case diesel 6-cylinder liquid-cooled vertical I-head |
| Displacemen |
377ci / 6.2L |
| Bore/Strok |
4.00x5.00inches / 102x 127mm |
| Air cleane |
oil bath |
| Compressio |
15.0:1 |
| Rated RP |
1350 |
| Starter volt |
12 |
J.I. CASE 500 ENGINE
The J.I. Case 500 tractor features a robust 6.2L 6-cylinder diesel engine, offering a balance of power and fuel efficiency suitable for medium to heavy-duty agricultural tasks. With a 30-gallon (113.6L) fuel tank, it allows for extended operation time, minimizing downtime for refueling. However, potential challenges may include the weight distribution from the larger tank and engine size, which could affect maneuverability in tighter fields.
| Description |
J.I. Case 6.2L 6-cyl diesel |
| Fuel tan |
30gal / 113.6L |
TRANSMISSION
The Case 500 tractor features a 4-speed forward and 1-speed reverse gear configuration, facilitating straightforward operation in various agricultural tasks. The limited number of forward gears may challenge operators in achieving optimal speed control over diverse terrain; however, it simplifies maintenance and reduces mechanical complexity. This setup is advantageous for tasks requiring consistent speed, such as plowing or tilling, but may not be ideal for applications necessitating rapid speed variations.
| Typ |
gear |
| Gear |
4 forward and 1 reverse |
J.I. CASE 500 TRANSMISSION
The Case 500 tractor features a 4-speed gear transmission, which provides versatility in various agricultural tasks by allowing operators to select appropriate power settings for different field operations. A potential advantage is the ability to optimize engine RPM and torque for efficient fuel usage, while a challenge may arise in the limited gear options for rapidly changing terrain. The ideal scenario involves using the tractor for pulling implements at lower speeds, maximizing productivity during grain handling or plowing.
MECHANICAL
The Case 500 tractor features a two-wheel drive (2WD) system, which optimizes fuel efficiency on flat, stable terrain but may struggle with traction in adverse conditions or uneven ground. The open operator station design enhances visibility and comfort but may expose the operator to weather elements. Ideal for applications such as mowing or light tillage, but may not be suitable for heavy-duty tasks requiring enhanced stability and control.
| Description |
Two-wheel drive Open operator station |
POWER TAKE-OFF (PTO)
| Rear PT |
independent |
| Rear RP |
540 |
J.I. CASE 500 TIRES
The Case 500 tractor features a robust agricultural front axle configuration rated for a wide range of tire sizes (30 inches), providing enhanced stability and traction on diverse terrains. The rear axle options (14-30/18-26/48 inches) allow for versatile implement compatibility but may require careful attention to load distribution to prevent wear or stress on the axle. In challenging agricultural scenarios, the durability of steel components offers long-term reliability, albeit with increased weight impacting fuel efficiency and maneuverability in tight spaces.
| Ag fron |
30 (steel) |
| Ag rea |
14-30/18-26/48 (steel) |
DIMENSIONS & TIRES
The Case 500 tractor features a wheelbase of 88 inches, providing stability for varied terrains, while its substantial weight of 8,000 lbs enhances traction and minimizes ground pressure. The front tires (7.50-18) and rear tires (15-30) optimize load distribution and can handle heavy implements, but a potential challenge is tire wear on rough surfaces. Ideal for medium-duty tasks, the Case 500 excels in agricultural operations and can effectively manage soil compaction in larger fields.
| Wheelbas |
88inches / 223cm |
| Weigh |
8,000lbs / 3628kg |
| Front tir |
7.50-18 |
| Rear tir |
15-30 |
BELT PULLEY
| Diamete |
13inches / 33cm |
| Widt |
8.25inches / 20cm |
| RP |
956 |
| Spee |
3254ft/min / 991.82meters/min |
