Manufacturer |
Case |
Price |
2,500(USD) |
Model |
310 |
Equipment Type |
Utility Tractors |
Factory |
Rock Island, Illinois, USA |
ENGINES OVERVIEW
The Case 310 tractor is powered by a 2.4L 4-cylinder gasoline or LP gas engine, offering versatility in fuel choice which can enhance operational efficiency and reduce fuel costs. Key advantages of LP gas include lower emissions and quieter operation, while the gasoline variant may provide broader availability of fuel. However, potential challenges include infrastructure limitations for LP refueling, impacting rural operation scenarios.
Description |
J.I. Case 2.4L 4-cyl gasoline J.I. Case 2.4L 4-cyl LP Gas |
ENGINE DETAIL 1
The Case 310 tractor features a J.I. Case G148 gasoline engine with a modest displacement of 148 ci (2.4L) and a compression ratio of 7.1:1, which may result in lower power output compared to modern counterparts, yet offers reliability and simplicity in agricultural applications. The tractor's oil bath air cleaner helps maintain engine efficiency in dusty conditions, while the 6-volt starter system may require careful maintenance due to its lower energy capacity. With a coolant capacity of 12 quarts (11.4L), adequate thermal management for sustained operation is achievable, but operators should monitor temperatures closely during heavy loads to prevent overheating.
Description |
J.I. Case G148 gasoline 4-cylinder liquid-cooled |
Displacemen |
148ci / 2.4L |
Bore/Strok |
3.375x4.125inches / 86x 105mm |
Air cleane |
oil bath |
Compressio |
7.1:1 |
Rated RP |
1750 |
Starter volt |
6 |
Coolant capacit |
12qts / 11.4L |
ENGINE DETAIL 2
The Case 310 tractor's 4-cylinder LP gas engine with a 148 ci (2.4L) displacement offers efficient power delivery at a rated RPM of 1750, making it suitable for moderate load applications. The oil bath air cleaner enhances the engine's longevity by providing superior filtration, but regular maintenance is required to retain optimal performance. Being a 6-volt starter system, it may pose challenges in extremely cold environments where higher voltage systems offer better cranking power.
Description |
J.I. Case LP Gas 4-cylinder liquid-cooled |
Displacemen |
148ci / 2.4L |
Bore/Strok |
3.375x4.125inches / 86x 105mm |
Air cleane |
oil bath |
Rated RP |
1750 |
Starter volt |
6 |
J.I. CASE 310 ENGINES
The Case 310 tractor is equipped with either a J.I. Case 2.4L 4-cylinder gasoline engine or a 2.4L 4-cylinder LP gas engine, offering versatility in fuel options. The gasoline variant typically delivers a higher power output, beneficial for heavy-duty applications, while the LP gas version provides cleaner emissions and can be more economical for prolonged use in rural settings. However, the availability of fuel types and service infrastructure can pose challenges in certain locations, so selecting the appropriate engine depends on operational requirements and regional support.
Description |
J.I. Case 2.4L 4-cyl gasoline J.I. Case 2.4L 4-cyl LP Gas |
TRANSMISSIONS OVERVIEW
The Case 310 tractor features a versatile 12-speed transmission with a mechanical shuttle, allowing for quick directional changes and enhanced control, particularly beneficial in fieldwork. The sliding gear system offers a robust construction, but may require more maintenance due to wear on moving parts under heavy loads. Consideration should be given to operator training for efficient utilization of the 4-speed gearbox in various agricultural tasks, optimizing performance and fuel efficiency.
Description |
4-speed sliding gear 12-speed 8-speed mechanical shuttle |
TRANSMISSION 1
The Case 310 tractor features a sliding gear transmission, offering four forward and one reverse gear, which provides straightforward operation but may require more frequent gear engagement compared to constant mesh systems. The 234.9mm dry disc clutch allows for efficient power transfer but could present challenges in heavy-duty applications as it may generate more heat and wear under prolonged use. This tractor is suitable for light to moderate agricultural tasks, where ease of use and maintenance are prioritized over high-speed performance.
Typ |
sliding gear |
Gear |
4 forward and 1 reverse |
Clutc |
234.9mm dry disc |
TRANSMISSION 2
The Case 310 tractor features a Tripl-Range transmission with 12 forward and 3 reverse gears, enabling flexible speed control for various agricultural tasks. Its two-clutch system combines a 234.9mm dry disc master foot clutch for engaging the transmission and wet discs for traction, enhancing durability and performance under heavy loads. This setup is advantageous for farmers needing seamless gear transitions for diverse applications, although it may require more precise operation compared to simple transmission systems.
Transmissio |
Tripl-Range |
Gear |
12 forward and 3 reverse |
Clutc |
234.9mm dry disc (master foot clutch) wet discs (traction hand clutch) |
Description |
Four gears (1-4) plus reverse (R) in three ranges (low, direct, high) |
TRANSMISSION 3
The Case 310 tractor features a mechanical shuttle transmission that enables seamless shifting between forward and reverse gears, enhancing maneuverability during operations. With 8 forward and 8 reverse gear options, operators can optimize performance for various tasks, from plowing to hauling, while maintaining efficient power delivery. Its straightforward mechanical design may limit hydraulic complexity but can pose challenges in high-load scenarios requiring precise speed adjustments.
Typ |
mechanical shuttle |
Gear |
8 forward and reverse |
J.I. CASE 310 TRANSMISSIONS
The Case 310 tractor features a 12-speed transmission with a 4-speed sliding gear system, allowing for versatile speed selection for various agricultural tasks. The 8-speed mechanical shuttle enhances maneuverability, making direction changes smoother during operations like tilling or transporting. However, operators may need time to familiarize themselves with this transmission system for optimal performance and efficiency in different field conditions.
Description |
4-speed sliding gear 12-speed 8-speed mechanical shuttle |
MECHANICAL
The Case 310 tractor features a two-wheel drive configuration, providing adequate traction for light to moderate agricultural tasks. The 6-inch disc brakes offer reliable stopping power, though they may require maintenance over time to ensure optimal performance. The open operator station with manual steering limits protection from environmental elements but allows for a straightforward design and ease of operator access.
Description |
Two-wheel drive 6-inch disc brakes Open operator station |
Steerin |
manual |
POWER TAKE-OFF (PTO)
Rear PT |
transmission (4-speed) / live (Tripl-Range) |
Rear RP |
540 |
J.I. CASE 310 TIRES
The Case 310 tractor features a front tire size of 6.00x16, which provides adequate maneuverability in tight spaces, while the rear tire size of 11x24 offers enhanced traction and stability for various agricultural tasks. However, the disparity in tire sizes might limit the tractor's performance in heavy load scenarios, potentially affecting weight distribution. This setup is ideal for lighter operations such as plowing or cultivating small fields, though operators should be cautious about deeper soil conditions that may cause slippage.
Ag fron |
6.00x16 |
Ag rea |
11x24 |
DIMENSIONS & TIRES
The Case 310 tractor, with a wheelbase of 75.5 inches (191 cm), offers enhanced stability for mid-sized agricultural tasks. Weighing 3200 lbs (1451 kg), it strikes a balance between maneuverability and traction, essential for various soil conditions. The front tire (6.00x16) provides decent steering control, while the rear tire (11x24) enhances load-bearing capacity, making it suitable for moderate towing and tilling operations.
Wheelbas |
75.5inches / 191cm |
Weigh |
3200lbs / 1451kg |
Front tir |
6.00x16 |
Rear tir |
11x24 |
ELECTRICAL
Groun |
positive |
Battery volt |
6 |