| Manufacturer | Case |
| Price | 3,500(USD) |
| Model | 300 |
| Equipment Type | - |
| Factory | Rock Island, Illinois, |
ENGINE DETAIL
The Case 300 tractor features a Continental GD157 diesel engine with a robust compression ratio of 15.5:1, promoting efficient fuel combustion and power generation. Its 2.6L displacement and effective cooling system, utilizing a 12-quart capacity, ensure optimal performance during prolonged operations, yet may be challenged by potential overheating in high-load scenarios. Additionally, the ether pre-heating system aids in cold starts, which is advantageous for operations in colder climates where diesel performance can be hindered.
| Description | Continental GD157 diesel 4-cylinder liquid-cooled |
| Displacemen | 157ci / 2.6L |
| Bore/Strok | 3.375x4.375inches / 86 x 111mm |
| Air cleane | oil bath |
| Pre-heatin | ether |
| Compressio | 15.5:1 |
| Rated RP | 1750 |
| Starter volt | 12 |
| Coolant capacit | 12qts / 11.4L |
J.I. CASE 300 ENGINE
The Case 300 tractor is powered by a Continental 2.6L 4-cylinder diesel engine, offering a balance of efficiency and torque for moderate agricultural tasks. Its compact size enhances maneuverability in tight fields, but the 2.6L engine may limit power output for heavier attachments compared to larger models. This makes it ideal for small to medium-scale farming operations, but users should consider potential power constraints when selecting implements.
| Description | Continental 2.6L 4-cyl diesel |
TRANSMISSIONS OVERVIEW
The Case 300 tractor features a 4-speed sliding gear transmission, optimized for medium-range power output and effective torque management, enhancing performance across various terrains. The 12-speed option, however, provides greater versatility, allowing operators to fine-tune speed and power delivery for specific tasks, improving fuel efficiency and productivity. Consider the intended application; if high variability in speed is required—such as field work with varying loads—the 12-speed may be more advantageous despite potential complexity in operation.
| Description | 4-speed sliding gear 12-speed |
TRANSMISSION 1
The Case 300 tractor features a sliding gear transmission with 4 forward and 1 reverse speed, allowing for flexible operation across various terrains. The 234.9mm dry disc clutch provides efficient power transfer but may require careful engagement to avoid wear in high-torque applications. This configuration is ideal for tasks requiring moderate speed control and maneuverability, though operators should consider potential challenges in shifting under load.
| Typ | sliding gear |
| Gear | 4 forward and 1 reverse |
| Clutc | 234.9mm dry disc |
TRANSMISSION 2
The Case 300 tractor features a Tripl-Range transmission with 12 forward and 3 reverse gears, allowing for versatile speed and torque adjustments suitable for various applications. The dual-clutch system includes a 234.9mm dry disc master foot clutch for smooth gear engagement and wet discs for enhanced traction control, providing better performance in demanding field conditions. However, the complex transmission may pose a challenge in maintenance; operators should be familiar with clutch adjustments to optimize performance and longevity, particularly in high-load scenarios.
| Transmissio | Tripl-Range |
| Gear | 12 forward and 3 reverse |
| Clutc | 234.9mm dry disc (master foot clutch) wet discs (traction hand clutch) |
| Description | Four gears (1-4) plus reverse (R) in three ranges (low, direct, high). |
J.I. CASE 300 TRANSMISSIONS
The Case 300 tractor features a 4-speed sliding gear transmission with an additional 12-speed capability, enhancing versatility in various field conditions. This setup allows for smooth gear transitions and optimal power delivery, making it efficient for both high-speed transport and low-speed drafting applications. However, users may face a learning curve with gear selection, which could impact operation efficiency in the initial period.
| Description | 4-speed sliding gear 12-speed |
MECHANICAL
The Case 300 tractor features a two-wheel drive system, which enhances fuel efficiency but may limit traction on uneven terrain compared to four-wheel drive options. Its 6-inch disc brakes provide reliable stopping power, although they may require more frequent maintenance in demanding conditions. The open operator station offers good visibility but exposes the operator to environmental elements, which can be a disadvantage in adverse weather scenarios.
| Description | Two-wheel drive 6-inch disc brakes Open operator station |
| Steerin | manual |
POWER TAKE-OFF (PTO)
| Rear PT | transmission (4-speed) live (Tripl-Range) |
| Rear RP | 540 |
J.I. CASE 300 TIRES
The Case 300 tractor is equipped with front tires of size 6.00x16 and rear tires of 11x24, providing a favorable balance for agricultural applications, especially in row cropping and tilled fields. This configuration enhances traction and stability, while the relatively larger rear tires allow for better load distribution and improved ground engagement. However, limited tire options may restrict performance in varied terrains, necessitating careful planning based on specific field conditions.
| Ag fron | 6.00x16 |
| Ag rea | 11x24 |
DIMENSIONS & TIRES
The Case 300 tractor has a wheelbase of 75.5 inches (191 cm), providing excellent stability for various agricultural tasks. Weighing 3,400 lbs (1,542 kg), its relatively compact frame allows for maneuverability in tight spaces but may limit its ability to handle heavier implements. The front tire size (6.00x16) is suitable for steering and lighter loads, while the rear tire size (11x24) enhances traction and support for heavier attachments, making it a versatile choice for small to medium-scale farming operations.
| Wheelbas | 75.5inches / 191cm |
| Weigh | 3,400lbs / 1542kg |
| Front tir | 6.00x16 |
| Rear tir | 11x24 |