Bobcat CT4050 Tractor

Manufacturer	Bobcat
Price	25,105(USD)
Model	CT4050
Equipment Type	Compact Utility Tractors
Factory	Daedong

BOBCAT CT4050 POWER

Engine	50.3hp / 37.5kW
Shuttle PTO (claimed)	45.6hp / 34.0kW
Gear PTO (claimed)	39.3hp / 29.3kW

ENGINE DETAIL

The Bobcat CT4050 features a Daedong 3FT turbocharged diesel engine with a modest displacement of 1.8L, providing 50.3hp at a rated RPM of 2600, ideal for moderate agricultural and landscaping tasks. Its Tier 4 emissions compliance ensures fuel efficiency and reduced environmental impact, but may require the use of ultra-low sulfur diesel to operate properly. The 12V electric starter system enhances reliability and ease of use, making it suitable for various operating scenarios but may present challenges in extreme cold conditions without adequate preparation.

Description	Daedong 3FT turbocharged diesel 3-cylinder liquid-cooled
Displacement	111.4ci / 1.8L
Bore/Stroke	3.43x4.03inches / 87 x 102mm
Emissions	Tier 4
Power	50.3hp / 37.5kW
Rated RPM	2600
Starter	electric
Starter volts	12

BOBCAT CT4050 ENGINE

The Bobcat CT4050 is powered by a Daedong 1.8L 3-cylinder diesel engine, known for efficient fuel combustion and reliability, making it suitable for various agricultural tasks. With an 11.9-gallon fuel tank, operators can expect a decent operational range, reducing downtime for refueling during extended use. However, the limited fuel capacity may necessitate refueling strategies on larger projects, which could be a logistical consideration in remote locations.

Description	Daedong 1.8L 3-cyl diesel
Fuel tank	11.9gal / 45.0L

TRANSMISSIONS OVERVIEW

The Bobcat CT4050 features an 8-speed synchronized shuttle hydrostatic transmission, providing smooth transitions between forward and reverse, enhancing operator control during tasks requiring frequent directional changes. This system also optimizes engine performance by allowing the operator to maintain a steady RPM under varying loads. However, while hydrostatic systems are user-friendly and reduce operator fatigue, they may have a slightly lower efficiency compared to traditional gear-driven systems in high-torque applications.

Description

8-speed synchronized shuttle hydrostatic

TRANSMISSION 1

The Bobcat CT4050 features a synchronized shuttle transmission with 8 forward and reverse gears, providing efficient control for various tasks. This design enhances operator comfort for switching between forward and reverse without excessive effort, making it advantageous for loaders and tight spaces. However, the complexity of maintenance might increase due to the additional gear components, requiring regular checks to ensure optimal performance.

Type	synchronized shuttle
Gears	8 forward and reverse

TRANSMISSION 2

The Bobcat CT4050 tractor features a hydrostatic transmission providing seamless power delivery with infinite gear ratios across three ranges, enhancing operational flexibility. This type of transmission allows for precise speed control, making it ideal for tasks requiring variable speeds, such as loader work or ground engagement. However, hydrostatic systems may require more maintenance and can generate additional heat, necessitating proper cooling management for prolonged performance.

Type	hydrostatic
Gears	infinite (3-range) forward and reverse

MECHANICAL

The Bobcat CT4050 features a 4x4 MFWD chassis, enhancing traction and stability in varied terrain, ideal for both agricultural and light construction tasks. Its power steering and wet disc brakes offer superior maneuverability and stopping power, reducing operator fatigue and increasing safety. The 8-speed synchronized shuttle hydrostatic transmission provides seamless shifting, improving efficiency during operation, especially in tasks requiring frequent directional changes.

Chassis	4x4 MFWD 4WD
Steering	power
Brakes	wet disc
Cab	Two-post folding ROPS
Transmissions	8-speed synchronized shuttle hydrostatic

HYDRAULICS

Pump flow	9.62gpm / 36.4lpm
Total flow	14.5gpm / 54.9lpm
Steering flow	4.94gpm / 18.7lpm

TRACTOR HITCH

Rear Type	I
Control	position control
Rear lift (at 24	2716lbs / 1231kg

POWER TAKE-OFF (PTO)

Rear PTO	independent
Rear RPM	540 (1.375)
Mid RPM	2000

BOBCAT CT4050 TIRES

The Bobcat CT4050 tractor features standard agricultural tires with a front size of 8-16 and a rear size of 13.6-24, providing excellent traction and stability in various field conditions. The tire dimensions favor maneuverability in tight spaces while ensuring sufficient ground contact for enhanced load-bearing capability. However, users should be aware that the tire selection may limit performance on hard surfaces, leading to potential wear and reduced efficiency in non-agricultural applications.

Standard tires (ag)

Front: 8-16. Rear: 13.6-24

DIMENSIONS

Wheelbase	71inches / 180cm
Length	125.5inches / 318cm
Width	63inches / 160cm
Height (ROPS)	96.8inches / 245cm
Shuttle Operating weight	3373lbs / 1529kg
Hydro Operating weight	3523lbs / 1598kg
Ground clearance	14.5inches / 36cm

DIMENSIONS & TIRES

The Bobcat CT4050 features a wheelbase of 71 inches, enhancing stability during operation, particularly in rugged terrain. With a weight range of 3373 to 3523 pounds, this tractor strikes a balance between maneuverability and stability, ideal for medium-duty applications such as landscaping and small-scale farming. The front tire specification of 8-16 and rear tire specification of 13.6-24 ensures adequate traction, but be mindful of tire wear on uneven surfaces, which may affect performance over time.

Wheelbase	71inches / 180cm
Weight	3373 to 3523 pounds
Front tire	8-16
Rear tire	13.6-24

ATTACHMENT OVERVIEW