AGCO Allis 7600 Tractor

Manufacturer AGCO Allis
Price 36,000(USD)
Model 7600
Equipment Type Row-Crop Tractors
Factory Italy

AGCO ALLIS 7600 POWER

Engine 95.2 hp/71.0 kW
PTO (claimed) 89.25 hp/66.6 kW

ENGINE DETAIL

The AGCO Allis 7600 tractor features a robust SLH 1055-P 5-cylinder diesel engine with a 317 ci (5.2 L) displacement and a high compression ratio of 17:1, providing efficient power output of 95.2 hp. Its direct injection fuel system enhances combustion efficiency, ideal for demanding agricultural applications; however, maintenance for the dual dry element air cleaner should be performed regularly to ensure optimal performance. Notably, with an oil capacity of 14.3 quarts, it is crucial to monitor oil levels closely to maintain engine health during prolonged operational use.

Description SLH 1055-P/diesel/5-cylinder/air-cooled inline
Displacement 317 ci/5.2 L
Bore/Stroke 4.13x4.72 inches/105 x 120 mm
Power 95.2 hp/71.0 kW
Fuel system direct injection
Air cleaner dual dry element
Compression 17:1
Rated RPM 2180
Idle RPM 650-2374
Starter electric
Starter volts 12
Starter power 4.7 hp/3.5 kW
Oil capacity 14.3 qts/13.5 L

AGCO ALLIS 7600 ENGINE

The AGCO Allis 7600 is powered by a SLH 5.2L 5-cylinder diesel engine, offering a blend of torque and efficiency suitable for demanding agricultural tasks. Pros include strong pulling capacity due to its robust engine design, while potential cons may involve higher maintenance due to complex systems typical of older models. Optimal scenarios include heavy tillage and hauling operations, where its horsepower can maximize productivity in the field.

Description SLH 5.2L 5-cyl diesel

TRANSMISSION

The AGCO Allis 7600 features a synchromesh transmission with 24 forward and 12 reverse gears, providing versatile control for various agricultural tasks. Its hydraulic dry clutch, with a diameter of 350mm, enhances engagement smoothness but may require regular maintenance for optimal performance. With an oil capacity of 92.6 qts, it's essential to monitor oil levels frequently to ensure efficient operation and prevent damage during extended use in field or haulage scenarios.

Type synchromesh
Gears 24 forward and 12 reverse
Clutch hydraulic dry 350mm disc
Oil capacity 92.6 qts/87.6 L
Description Four gears (1-4) in three ranges (L/M/H) with additional two-speed high-low shift.

SPEEDS

Description With 16.9R34 rear tires./

MECHANICAL

The AGCO Allis 7600 tractor features a robust 4x2 2WD or 4x4 MFWD configuration, allowing flexibility in traction for varied field conditions but may face challenges in deep muddy terrains due to the 2WD variant. Its mechanical differential lock enhances traction control, particularly beneficial in uneven terrain, while the hydraulic wet disc brakes provide superior stopping power and reduced maintenance compared to traditional brakes. The optional air-conditioned cab enhances operator comfort, extending productivity during long working hours, especially in hot climates.

Chassis 4x2 2WD/4x4 MFWD 4WD
Final drives inboard planetary
Differential lock mechanical
Steering power
Brakes hydraulic wet disc
Cab Four-post ROPS. Cab optional with air-conditioning.
Transmission 24-speed synchromesh

CAPACITY

Fuel 31.7 gal/120.0 L
Hydraulic system 23.1 gal/87.4 L

HYDRAULICS

Type open center
Capacity 23.1 gal/87.4 L
Pressure 2610 psi/180.0 bar
Valves 2
Pump flow 16.9 gpm/64.0 lpm

TRACTOR HITCH

Rear Type II/I
Control lower link draft control
Rear lift (at ends) 10141 lbs/4599 kg

POWER TAKE-OFF (PTO)

Rear PTO independent
Clutch hydraulic wet disc
Rear RPM 540/1000 (1.375)
Engine RPM 540@1957/1000@2125

AGCO ALLIS 7600 TIRES

The AGCO Allis 7600 tractor offers two configurations: a 2WD model optimized for cost-effective operations on flat terrain, and a more advanced 4WD variant that enhances traction and stability on uneven or soft ground. The 2WD model with 10.00-16 front tires may struggle in wet or sloppy conditions, whereas the 4WD setup, with larger 14.9R24 front tires, provides superior grip and reduced slippage. Ultimately, the choice between 2WD and 4WD should consider the specific agricultural applications, terrain type, and desired field performance.

2WD Standard tires (ag) Front: 10.00-16. Rear: 16.9R34
4WD Standard tires (ag) Front: 14.9R24. Rear: 16.9R34

DIMENSIONS

2WD Wheelbase 104.6 inches/265 cm
4WD Wheelbase 104 inches/264 cm
2WD Length 168.2 inches/427 cm
4WD Length 171.2 inches/434 cm
Width 84 inches/213 cm
Height (exhaust) 110 inches/279 cm
2WD Ground clearance 17.6 inches/44 cm
4WD Ground clearance 18.4 inches/46 cm
Rear axle Flange
2WD Front tread 60 to 80 inches/152 to 203 cm
4WD Front tread 64 to 76 inches/162 to 193 cm
Rear tread 61 to 85.2 inches/154 to 216 cm

AGCO ALLIS 7600 WEIGHT

2WD ROPS Shipping 8179 lbs/3709 kg
4WD ROPS Shipping 9348 lbs/4240 kg
2WD Cab Shipping 8598 lbs/3900 kg
4WD Cab Shipping 9788 lbs/4439 kg
2WD Max capacity 11464 lbs/5200 kg
4WD Max capacity 14991 lbs/6799 kg

DIMENSIONS & TIRES

The AGCO Allis 7600 tractor features a compact wheelbase, facilitating maneuverability in tight fields, particularly beneficial for smaller agricultural operations. Weighing between 8,179 to 9,788 pounds, it offers significant stability, although the weight variance may affect soil compaction based on load configurations. The 2WD setup with 16.9R34 rear tires provides excellent traction on dry surfaces, but the absence of 4WD may limit performance in muddy or uneven terrains.

2WD Wheelbase 104.6 inches/265 cm
4WD Wheelbase 104 inches/264 cm
Weight 8179 to 9788 pounds
Front tire 10.00-16
2WD Rear tire 16.9R34

7600 SERIAL NUMBERS

Location Serial number plate on the right side of the 7600 console.
1991 1001
1992 1178
1993 1193
1994 1255
1995 1359
1996 1417

ELECTRICAL

Ground negative
Charging system alternator
ROPS Charging amps 55
Cab Charging amps 65
Battery volts 12
Battery AH 120


Last Updated 2025-01-01
Stephen is a passionate tractor hobbyist with a deep-seated love for all things mechanized and agricultural. Growing up in a rural setting, he developed a fascination with these mighty machines that have played a crucial role in shaping the farming industry.

Comments

No comment yet